Dissolution of EAF slag minerals in aqueous media: Effects of sonication on brownmillerite and gehlenite.

The accumulation of electric arc furnace slag (EAFS) in landfills has been causing severe environmental problems. This study examines the dissolution properties of EAFS minerals, including brownmillerite and gehlenite, essential for their possible use in resource recovery. An investigation was conducted to compare the effects of sonication and stirring on mineral dissolution while also assessing the usage of citrate as a complexing agent for gehlenite.

Mesoporous silica-amine beads from blast furnace slag for CO capture applications.

Steel slag, abundantly available at a low cost and containing over 30 wt% silica, is an attractive precursor for producing high-surface-area mesoporous silica. By employing a two-stage dissolution-precipitation method using 1 M HCl and 1 M NaOH, we extracted pure SiO, CaO, MgO, . from blast furnace slag (BFS).

Characterization of an aged alkali-activated slag roof tile after 30 years of exposure to Northern Scandinavian weather.

Alkali-activated materials (AAMs) have been known as an alternative cementitious binder in construction for more than 120 years. Several buildings utilizing AAMs were realized in Europe in the 1950s-1980s. During the last 30 years, the interest towards AAMs has been reinvigorated due to the potentially lower CO footprint in comparison to Portland cement.

Surface Layer Alteration of Multi-Oxide Silicate Glasses at a Near-Neutral pH in the Presence of Citric and Tartaric Acid.

This study aimed at determining the chemical alterations occurring at the surface of multi-oxide silicate glasses in the presence of organic ligands─citrate and tartrate─at a near-neutral pH. Batch surface titration experiments for basaltic glass and blast furnace slag (BFS) were conducted in the range of 6.4 < pH < 8 to investigate the element release, and speciation and solid phase saturation were modeled with PHREEQC software.

Characterization of mineral wool waste chemical composition, organic resin content and fiber dimensions: Aspects for valorization.

Despite mineral wool waste is only a small fraction of total construction and demolition waste (CDW) by mass, it requires large transportation and landfilling capacities due to its low bulk density, and its utilization remains low compared to other CDW types. It is essential to understand the physical and chemical properties of this waste fraction in order to utilize it, e.g.

Sustainable batching water options for one-part alkali-activated slag mortar: Sea water and reverse osmosis reject water.

Concrete production is globally a major water consumer, and in general, drinking-quality water is mixed in the binder. In the present study, simulated sea water and reverse osmosis reject water were used as batching water for one-part (dry-mix) alkali-activated blast furnace slag mortar. Alkali-activated materials are low-CO2 alternative binders gaining world-wide acceptance in construction.

Ag- or Cu-modified geopolymer filters for water treatment manufactured by 3D printing, direct foaming, or granulation.

In this work, we compared the main characteristics of highly porous geopolymer components for water treatment applications manufactured by 3D printing, direct foaming, or granulation. Furthermore, different approaches to impregnate the materials with Ag or Cu were evaluated to obtain filters with disinfecting or catalytic properties. The results revealed that all of the investigated manufacturing methods enabled the fabrication of components that possessed mesoporosity, suitable mechanical strength, and water permeability, even though their morphologies were completely different.

Removal of ammonium from municipal wastewater with powdered and granulated metakaolin geopolymer.

Ammonium [Formula: see text] removal from municipal wastewater poses challenges with the commonly used biological processes. Especially at low wastewater temperatures, the process is frequently ineffective and difficult to control. One alternative is to use ion-exchange.

Utilization of Mineral Wools as Alkali-Activated Material Precursor.

Mineral wools are the most common insulation materials in buildings worldwide. However, mineral wool waste is often considered unrecyclable because of its fibrous nature and low density. In this paper, rock wool (RW) and glass wool (GW) were studied as alkali-activated material precursors without any additional co-binders.

Alkali activation of recovered fuel-biofuel fly ash from fluidised-bed combustion: Stabilisation/solidification of heavy metals.

Recovered fuel-biofuel fly ash from a fluidized bed boiler was alkali-activated and granulated with a sodium-silicate solution in order to immobilise the heavy metals it contains. The effect of blast-furnace slag and metakaolin as co-binders were studied. Leaching standard EN 12457-3 was applied to evaluate the immobilisation potential.