Design of a pilot plant-type pharmaceutical reactor to address the problem of interchangeability of generic semisolid formulations.

Objective And Significance: This research aims to design and develop a pilot plant-type pharmaceutical reactor with a strong focus on its volumetric capacity and heat transfer capabilities. The primary goal is to replicate design and control strategies at the laboratory or pilot scale to analyze and produce generic semisolid formulations.

Methods: Computational fluid dynamics and heat transfer modeling, utilizing the finite volume method, were employed to determine the reactor's performance and particle trajectory during the mixing and stirring.

In vivo efficacy of bevacizumab-loaded albumin nanoparticles in the treatment of colorectal cancer.

Bevacizumab (as other monoclonal antibodies) has now become a mainstay in the treatment of several cancers in spite of some limitations, including poor tumour penetration and the development of resistance mechanisms. Its nanoencapsulation may be an adequate strategy to minimize these problems. The aim of this work was to evaluate the efficacy of bevacizumab-loaded nanoparticles (B-NP-PEG) on a xenograft model of human colorectal cancer.

In vivo effect of bevacizumab-loaded albumin nanoparticles in the treatment of corneal neovascularization.

Corneal neovascularization (CNV) is associated with different ocular pathologies, including infectious keratitis, trachoma or corneal trauma. Pharmacological treatments based on the topical application of anti-VEGF therapies have been shown to be effective in the treatment and prevention of CNV. The aim of this work was to evaluate the effect of bevacizumab-loaded albumin nanoparticles in a rat model of CNV.

Human serum albumin nanoparticles for ocular delivery of bevacizumab.

Bevacizumab-loaded nanoparticles (B-NP) were prepared by a desolvation process followed by freeze-drying, without any chemical, physical or enzymatic cross-linkage. Compared with typical HSA nanoparticles cross-linked with glutaraldehyde (B-NP-GLU), B-NP displayed a significantly higher mean size (310 nm vs. 180 nm) and a lower negative zeta potential (-15 mV vs.

Hyaluronan-Itaconic Acid-Glutaraldehyde Films for Biomedical Applications: Preliminary Studies.

New hyaluronic acid-itaconic acid films were synthesized as potential materials with biomedical applications. In this work, we explored the homogeneous cross-linking reactions of hyaluronic acid using glutaraldehyde in the presence of itaconic acid and triacetin as plasticizers. Biomechanical properties were assessed in terms of stability by measuring swelling in aqueous environments, investigating wettability using contact angle tests, and evaluating bioadhesive performance.

Spray dried microspheres based on chitosan: A promising new carrier for intranasal administration of polymeric antigen BLSOmp31 for prevention of ovine brucellosis.

Previous studies have demonstrated that parenteral immunization with polymeric antigen BLSOmp31 induced a strong immune response and conferred protection against Brucella ovis in rams. This work describes the development of a novel formulation strategy for the delivery of BLSOmp31 in the nasal mucosa. Chitosan microparticles were prepared by spray-drying technology processes and recombinant chimera BLSOmp31 was loaded by passive adsorption onto chitosan microspheres, which were characterized by means of the evaluation of size, zeta potential, morphology, and loading and release rate of BLSOmp31.

RP-HPLC method development for the simultaneous determination of timolol maleate and human serum albumin in albumin nanoparticles.

An isocratic high-performance liquid chromatographic method was developed and validated for the simultaneous determination of human serum albumin (HSA) and timolol in albumin nanoparticles. This method involved a reversed-phase-C18 column thermostated at 25 °C, UV detection at 276 nm, flow rate of 1.0 ml/min and a mobile phase compounded by 0.

New mucoadhesive polymeric film for ophthalmic administration of acetazolamide.

This article reports the results concerning the design and manufacture of a novel polymeric film for ocular administration of acetazolamide (AZM), and a patent document presented to INPI- National Institute of Industrial/Intelectual Property. The system was designed using mucoadhesive polymers, such as carbomer (CB974P) and sodium carboxymethylcellulose (NaCMC), combined with the poloxamer (POL407) which behaves as a swelling modulator, surfactant and slightly plasticizer. The maximum amount of AZM to be incorporated without loss of homogeneity or precipitation of the drug, was 0.

Bioadhesive properties of poly(anhydride) nanoparticles coated with different molecular weights chitosan.

The aim of this study was to develop and characterize the bioadhesive properties of poly(anhydride) nanoparticles coated with two types of low-molecular weight chitosan (CH20 of 20 kDa or CH50 of 50 kDa) or their thiolated conjugates. Nanoparticles were prepared by a solvent displacement method and characterized by measuring the size, zeta potential, morphology and composition. For bioadhesion studies, nanoparticles were fluorescently labelled with rhodamine B isothiocyanate.

HPLC method for the determination of nystatin in saliva for application in clinical studies.

An isocratic high-performance liquid chromatographic method was developed, optimized and validated for the determination of nystatin in human saliva (UV and fluorescence detection). A reversed-phase Luna C18 column (25 degrees C), with a mobile phase of MeOH, H2O, and DMF (70:20:10, v/v/v), and a flow-rate of 0.8 ml/min were used.

Swellable drug-polyelectrolyte matrices (SDPM). Characterization and delivery properties.

The objective of the study is to develop and characterize the delivery properties of swellable drug-polyelectrolyte matrices (SDPM). Solid complexes (C-D)X of carbomer (C) neutralized with different proportions of model basic drugs (D), in which D is atenolol, lidocaine, and metoclopramide, and X=25, 50, 75 and 100 mol of D per 100 equivalents of carboxylic groups of C, were prepared and characterized by DSC-TG, IR, and X-ray diffraction studies. Mechanistic studies with hydrophilic and hydrophobic basic drugs were conducted to explore the drug release patterns of SDPM.

Drug release from carbomer:carbomer sodium salt matrices with potential use as mucoadhesive drug delivery system.

In vitro mucoadhesion, water uptake, and drug release of nystatin (N) from matrices of carbomer (C) and lyophilized carbomer sodium salt (CNaL) mixtures were evaluated. Matrices with different ratios C:CNaL were prepared by direct compression. Commercial C as well as lyophilized powder (CL) were used.

Double-layered mucoadhesive tablets containing nystatin.

The objective of this work was to design a mucoadhesive tablet with a potential use in the treatment of oral candidosis. A 2-layered tablet containing nystatin was formulated. Lactose CD (direct compression), carbomer (CB), and hydroxypropylmethylcellulose (HPMC) were used as excipients.

Design of Peumus boldus tablets by direct compression using a novel dry plant extract.

A solid pharmaceutical dosage formulation using a novel dry plant extract of Peumus boldus MOL. (Monimiaceae) (Pb) is proposed. The botanical evaluation of plant material, through morphological and anatomical diagnosis, is presented.