Antiviral Potential and Chemical Composition of Wild Spreng. Populations (Asteraceae) from Córdoba, Argentina: Perspective on Population Variability.

Medicinal plants have been explored worldwide as potential alternatives for the prevention and treatment of different diseases, including viral infections. Spreng. (Asteraceae) is a native medicinal species widely used in South America.

Development of a Six-Degree-of-Freedom Analog 3D Tactile Probe Based on Non-Contact 2D Sensors.

In this paper, a six-degree-of-freedom analog tactile probe with a new, simple, and robust mechanical design is presented. Its design is based on the use of one elastomeric ring that supports the stylus carrier and allows its movement inside a cubic measuring range of ±3 mm. The position of the probe tip is determined by three low-cost, noncontact, 2D PSD (position-sensitive detector) sensors, facilitating a wider application of this probe to different measuring systems compared to commercial ones.

Melatonin protects gingival mesenchymal stem cells and promotes differentiation into osteoblasts.

Melatonin (MEL) has antioxidant properties and participates in osteogenic differentiation. In periodontitis, in which increased oxidative stress and bone resorption are involved, mesenchymal stem cells derived from the gingiva (GMSCs) combined with MEL could be relevant for osteogenic regeneration. In this study, we studied the antioxidant and differentiating effect of MEL on an in vitro system of GMSCs.

Design of a Multi-Point Kinematic Coupling for a High Precision Telescopic Simultaneous Measurement System.

This paper covers the design of a new multi-point kinematic coupling specially developed for a high precision multi-telescopic arm measurement system for the volumetric verification of machine tools with linear and/or rotary axes. The multipoint kinematic coupling allows the simultaneous operation of the three telescopic arms that are registered at the same time to a sphere fixed on the machine tool spindle nose. Every coupling provides an accurate multi-point contact to the sphere, avoiding collisions and interferences with the other two multi-point kinematic couplings, and generating repulsion forces among them to ensure the coupling's fingers interlacing along the machine tool x/y/z travels in the verification process.

The extent of infectious SARS-CoV-2 shedding in an Argentinean cohort.

Background: To analyze the infectious extent of severe acute respiratory syndrome coronavirus 2 (SARS-COV-2) in different settings where prevention strategies are critical to limit infection spread, we evaluated SARS-COV-2 viability to guide public health policies regarding isolation criteria and infection control.

Methods: We attempted viral isolation in 82 nasopharyngeal swabs from 72 patients with confirmed SARS-COV-2 infection. Study population was divided into four groups: (i) Patients during the first week of symptoms; (ii) Patients with prolonged positive PCR; (iii) Healthcare workers from a hospital participating of an outbreak investigation, with SARS-COV-2 infection confirmed by reverse transcriptase polymerase chain reaction (RT-PCR) and (iv) Recipients of convalescent immune plasma (CIP).

Inactivation of Herpes Simplex Virus by Photosensitizing Anthraquinones Isolated from Heterophyllaea pustulata.

is a phototoxic plant from Argentina. Aerial parts extracts, high in photosensitizing anthraquinones, have shown antiviral activity. The purpose of this study was to study the antiherpetic activity of the main purified anthraquinones, even evaluating their competence as photodynamic sensitizers to photo-stimulate the antiviral effect.

First report of antiviral activity of nordihydroguaiaretic acid against Fort Sherman virus (Orthobunyavirus).

The genus Orthobunyavirus are a group of viruses within arbovirus, with a zoonotic cycle, some of which could lead to human infection. A characteristic of these viruses is their lack of antiviral treatment or vaccine for its prevention. The objective of this work was to study the in vitro antiviral activity of nordihydroguaiaretic acid (NDGA), the most important active compound of Larrea divaricata Cav.

Melatonin is an effective protector of gingival cells damaged by the cytotoxic effect of glutamate and DL-buthionine sulfoximine.

Background And Objective: Cellular damage related to oxidative stress (OS) is implicated in periodontal diseases (PD). Melatonin (MEL) has multiple functions, and it has been described as a potential treatment for PD. We aim at evaluating the protective effects of MEL on an in vitro model of cellular damage triggered by glutamate (GLUT) and DL-buthionine sulfoximine (BSO), on gingival cells (GCs) in culture.

Development of a High Precision Telescopic Instrument Based on Simultaneous Laser Multilateration for Machine Tool Volumetric Verification.

This paper presents the design of a high precision telescopic system consisting in three lines, with measuring principle based on simultaneous laser multilateration. The system offers the high precision of the interferometer systems and allows the autonomous tracking of a sphere joined to the spindle nose of the machine tool by simultaneous contact of all the lines. The main advantage of the system is that it allows data capture to be carried out in a single cycle thanks to simultaneous operation with at least three telescopic arms using a novel multipoint kinematic coupling.

Development and Validation of a Calibration Gauge for Length Measurement Systems.

Due to accuracy requirements, robots and machine-tools need to be periodically verified and calibrated through associated verification systems that sometimes use extensible guidance systems. This work presents the development of a reference artefact to evaluate the performance characteristics of different extensible precision guidance systems applicable to robot and machine tool verification. To this end, we present the design, modeling, manufacture and experimental validation of a reference artefact to evaluate the behavior of these extensible guidance systems.

Environmental Surveillance of Human Enteroviruses in Córdoba City, Argentina: Prevalence and Detection of Serotypes from 2009 to 2014.

Environmental surveillance is an effective approach to investigate the circulation of human enteroviruses (EVs) in the population. EVs excreted by patients who present diverse clinical syndromes can remain infectious in the environment for several weeks, and limited data on circulating environmental EVs are available. A 6-year (2009-2014) surveillance study was conducted to detect non-polio enteroviruses (NPEVs) in the urban sewage of Cordoba city, Argentina.

In-Process Measurement for the Process Control of the Real-Time Manufacturing of Tapered Roller Bearings.

Tapered roller bearings can accommodate high radial loads as well as high axial loads. The manufacturing process consists of machining processes for ring and component assembly. In this contribution, the parameters of influence on the measurement procedure were studied.

Environmental Surveillance of Enteroviruses in Central Argentina: First Detection and Evolutionary Analyses of E14.

Environmental surveillance is an effective approach to investigate the circulation of human enteroviruses in the population. Enteroviruses E14, CVA9, E-6, E16, E20, E25, E13, and CVA24 were detected in sewage and a watercourse in central Argentina. E14 was the most frequent serotype and was found for the first time in environmental samples in our region.

Activity Patterns of St. Louis Encephalitis and West Nile Viruses in Free Ranging Birds during a Human Encephalitis Outbreak in Argentina.

St. Louis encephalitis virus (SLEV) (Flavivirus) is a reemerging arbovirus in the southern cone of South America. In 2005, an outbreak of SLEV in central Argentina resulted in 47 human cases with 9 deaths.

Design Optimization for the Measurement Accuracy Improvement of a Large Range Nanopositioning Stage.

Both an accurate machine design and an adequate metrology loop definition are critical factors when precision positioning represents a key issue for the final system performance. This article discusses the error budget methodology as an advantageous technique to improve the measurement accuracy of a 2D-long range stage during its design phase. The nanopositioning platform NanoPla is here presented.

Volumetric verification of multiaxis machine tool using laser tracker.

This paper aims to present a method of volumetric verification in machine tools with linear and rotary axes using a laser tracker. Beyond a method for a particular machine, it presents a methodology that can be used in any machine type. Along this paper, the schema and kinematic model of a machine with three axes of movement, two linear and one rotational axes, including the measurement system and the nominal rotation matrix of the rotational axis are presented.

3D geometrical inspection of complex geometry parts using a novel laser triangulation sensor and a robot.

This article discusses different non contact 3D measuring strategies and presents a model for measuring complex geometry parts, manipulated through a robot arm, using a novel vision system consisting of a laser triangulation sensor and a motorized linear stage. First, the geometric model incorporating an automatic simple module for long term stability improvement will be outlined in the article. The new method used in the automatic module allows the sensor set up, including the motorized linear stage, for the scanning avoiding external measurement devices.

Immunoglobulin G subclasses in antibody responses to St. Louis encephalitis virus infections.

The aim of this study was to recognize the specific antiviral response patterns of IgG1, IgG2, IgG3 and IgG4 subclasses, elicited during St. Louis encephalitis virus (SLEV) infection in humans. Eighty-five samples of human sera from 44 patients with SLEV infection were obtained between days 1 and 365 or later, after onset of the disease.

Early detection of non-ambulatory survivors six months after stroke.

The aim of this study was to evaluate prospectively early predictors for ambulation and motor outcome 6~months after stroke occurrence. Sixty-eight consecutive, first-ever, stroke survivors were prospectively studied from the second week to the sixth month post stroke. Sex, age, stroke type, urinary incontinence, National Institutes of Health Stroke Scale (NIHSS), and Trunk Control Test (TCT) scores were taken as independent variables.

An overview of kinematic and calibration models using internal/external sensors or constraints to improve the behavior of spatial parallel mechanisms.

This paper presents an overview of the literature on kinematic and calibration models of parallel mechanisms, the influence of sensors in the mechanism accuracy and parallel mechanisms used as sensors. The most relevant classifications to obtain and solve kinematic models and to identify geometric and non-geometric parameters in the calibration of parallel robots are discussed, examining the advantages and disadvantages of each method, presenting new trends and identifying unsolved problems. This overview tries to answer and show the solutions developed by the most up-to-date research to some of the most frequent questions that appear in the modelling of a parallel mechanism, such as how to measure, the number of sensors and necessary configurations, the type and influence of errors or the number of necessary parameters.

Modelling and calibration technique of laser triangulation sensors for integration in robot arms and articulated arm coordinate measuring machines.

A technique for intrinsic and extrinsic calibration of a laser triangulation sensor (LTS) integrated in an articulated arm coordinate measuring machine (AACMM) is presented in this paper. After applying a novel approach to the AACMM kinematic parameter identification problem, by means of a single calibration gauge object, a one-step calibration method to obtain both intrinsic-laser plane, CCD sensor and camera geometry-and extrinsic parameters related to the AACMM main frame has been developed. This allows the integration of LTS and AACMM mathematical models without the need of additional optimization methods after the prior sensor calibration, usually done in a coordinate measuring machine (CMM) before the assembly of the sensor in the arm.

Human outbreak of St. Louis encephalitis detected in Argentina, 2005.

Background: An outbreak of flavivirus encephalitis occurred in 2005 in Córdoba province, Argentina.

Objectives: To characterize the epidemiologic and clinical features of that outbreak and provide the serologic results that identified St. Louis encephalitis virus (SLEV) as the etiologic agent.