Catalytic assessment of solid materials for the pyrolytic conversion of low-density polyethylene into fuels.

Pyrolysis techniques provide an interesting way of recycling plastic wastes (PW) by transforming them into liquid fuels with high calorific values. Catalysts are employed in PW pyrolysis in order to favor cracking reactions; in that regard, cheap and abundant natural resources are being investigated as potential catalyst precursors. This article explores the pyrolysis of low-density polyethylene (LDPE) in a semibatch reactor under a reduced pressure of 300 torr and temperatures in the range of 370 °C-430 °C.

Heterogeneous photo-Fenton process using iron-modified regional clays as catalysts: photonic and quantum efficiencies.

A regional raw clay was used as the starting material to prepare iron-pillared clays with different iron contents. The catalytic activity of these materials was tested in the heterogeneous photo-Fenton process, applied to the degradation of 2-chlorophenol chosen as the model pollutant. Different catalyst loads between 0.

Application of a montmorillonite clay modified with iron in photo-Fenton process. Comparison with goethite and nZVI.

Iron pillared clay (Fe-PILC) was prepared from a montmorillonite and was characterized by scanning electron microscopy and X-ray fluorescence. Fe-PILC catalytic activity was evaluated in photo-Fenton processes applied to the degradation of 2-clorophenol. Different catalyst loads were assayed.