Electron Diffusion Length Effect on Direction of Irradiance in Transparent FAPbBr Perovskite Solar Cells.

Transparent photovoltaics for building integration represent a promising approach for renewable energy deployment. These devices require transparent electrodes to manage transmittance and to ensure proper cell operation. In this study, transparent FAPbBr-based perovskite solar cells optimized via a passivation treatment were demonstrated with average visible transmittance values above 60% and light utilization efficiencies up to 5.

NiO Passivation in Perovskite Solar Cells: From Surface Reactivity to Device Performance.

Nonstoichiometric nickel oxide (NiO) is one of the very few metal oxides successfully used as hole extraction layer in p-i-n type perovskite solar cells (PSCs). Its favorable optoelectronic properties and facile large-scale preparation methods are potentially relevant for future commercialization of PSCs, though currently low operational stability of PSCs is reported when a NiO hole extraction layer is used in direct contact with the perovskite absorber. Poorly understood degradation reactions at this interface are seen as cause for the inferior stability, and a variety of interface passivation approaches have been shown to be effective in improving the overall solar cell performance.

The dual nature of metal halide perovskites.

Metal halide perovskites have brought about a disruptive shift in the field of third-generation photovoltaics. Their potential as remarkably efficient solar cell absorbers was first demonstrated in the beginning of the 2010s. However, right from their inception, persistent challenges have impeded the smooth adoption of this technology in the industry.

Influence of Redox Couple on the Performance of ZnO Dye Solar Cells and Minimodules with Benzothiadiazole-Based Photosensitizers.

ZnO-based dye-sensitized solar cells exhibit lower efficiencies than TiO-based systems despite advantageous charge transport dynamics and versatility in terms of synthesis methods, which can be primarily ascribed to compatibility issues of ZnO with the dyes and the redox couples originally optimized for TiO. We evaluate the performance of solar cells based on ZnO nanomaterial prepared by microwave-assisted solvothermal synthesis, using three fully organic benzothiadiazole-based dyes YKP-88, YKP-137, and MG-207, and alternative electrolyte solutions with the I/I , Co(bpy) , and Cu(dmp) redox couples. The best cell performance is achieved for the dye-redox couple combination YKP-88 and Co(bpy) , reaching an average efficiency of 4.

Photochromic spiro-indoline naphthoxazines and naphthopyrans in dye-sensitized solar cells.

Photochromic dyes possess unique properties that can be exploited in different domains, including optics, biomedicine and optoelectronics. Herein, we explore the potential of photochromic spiro-indoline naphthoxazine (SINO) and naphthopyran (NIPS) for application in photovoltaics. We designed and synthesized four new photosensitizers with a donor-pi-acceptor structure embedding SINO and NIPS units as photochromic cores.

Photochromic naphthopyran dyes incorporating a benzene, thiophene or furan spacer: effect on photochromic, optoelectronic and photovoltaic properties in dye-sensitized solar cells.

We recently demonstrated that diaryl-naphthopyran photochromic dyes are efficient for sensitization of TiO mesoporous electrodes, thus allowing the fabrication of photo-chromo-voltaic cells that can self-adapt their absorption of light and their generation of electricity with the light intensity. Herein we report the synthesis, the characterisation of two novel photochromic dyes based on diaryl-naphthopyran core i.e NPI-ThPh and NPI-FuPh for use in Dye Sensitized Solar Cells (DSSCs).

Understanding equivalent circuits in perovskite solar cells. Insights from drift-diffusion simulation.

Perovskite solar cells (PSCs) have reached impressively high efficiencies in a short period of time; however, the optoelectronic properties of halide perovskites are surprisingly complex owing to the coupled ionic-electronic charge carrier dynamics. Electrical impedance spectroscopy (EIS) is a widely used characterization tool to elucidate the mechanisms and kinetics governing the performance of PSCs, as well as of many other semiconductor devices. In general, equivalent circuits are used to evaluate EIS results.

Transferable Classical Force Field for Pure and Mixed Metal Halide Perovskites Parameterized from First-Principles.

Many key features in photovoltaic perovskites occur in relatively long time scales and involve mixed compositions. This requires realistic but also numerically simple models. In this work we present a transferable classical force field to describe the mixed hybrid perovskite MAFAPb(BrI) for variable composition (∀, ∈ [0, 1]).

Challenges of modeling nanostructured materials for photocatalytic water splitting.

Understanding the water splitting mechanism in photocatalysis is a rewarding goal as it will allow producing clean fuel for a sustainable life in the future. However, identifying the photocatalytic mechanisms by modeling photoactive nanoparticles requires sophisticated computational techniques based on multiscale modeling. In this review, we will survey the strengths and drawbacks of currently available theoretical methods at different length and accuracy scales.

Characterization of Photochromic Dye Solar Cells Using Small-Signal Perturbation Techniques.

Photochromic dye-sensitized solar cells (DSSCs) are novel semi-transparent photovoltaic devices that self-adjust their optical properties to the irradiation conditions, a feature that makes them especially suitable for building integrated photovoltaics. These novel solar cells have already achieved efficiencies above 4%, and there are multiple pathways to improve the performance. In this work, we conduct a full characterization of DSSCs with the photochromic dye NPI, combining electrical impedance spectroscopy (EIS) and intensity-modulated photocurrent spectroscopy (IMPS).

Illumination Intensity Dependence of the Recombination Mechanism in Mixed Perovskite Solar Cells.

Recombination mechanisms in solar cells are frequently assessed through the determination of ideality factors. In this work we report an abrupt change of the value of the "apparent" ideality factor (n ) in high-efficiency FA MA PbI Br based mesoscopic perovskite solar cells as a function of light intensity. This change is manifested as a transition from a regime characterized by n ∼1.

Identification of recombination losses and charge collection efficiency in a perovskite solar cell by comparing impedance response to a drift-diffusion model.

Interpreting the impedance response of perovskite solar cells (PSCs) is significantly more challenging than for most other photovoltaics. This is for a variety of reasons, of which the most significant are the mixed ionic-electronic conduction properties of metal halide perovskites and the difficulty in fabricating stable, and reproducible, devices. Experimental studies, conducted on a variety of PSCs, produce a variety of impedance spectra shapes.

Understanding the Interfaces between Triple-Cation Perovskite and Electron or Hole Transporting Material.

The properties of efficient solar cells fabricated with triple-cation perovskite placed between a mesoporous titania layer and a spiro-OMeTAD layer are studied by using devices either prepared under water-free drybox conditions or fabricated under ambient room humidity. The morphological studies indicate that the content of unreacted PbI phase in the perovskite structure is much higher near the interface with titania than near the interface with spiro-OMeTAD. The stationary emission spectra and transient bleach peaks of perovskites show additional long-wavelength features close to the titania side.

Photochromic dye-sensitized solar cells with light-driven adjustable optical transmission and power conversion efficiency.

Semi-transparent photovoltaics only allows for the fabrication of solar cells with an optical transmission that is fixed during their manufacturing resulting in a trade-off between transparency and efficiency. For the integration of semi-transparent devices in building, ideally solar cells should generate electricity while offering the comfort for users to self-adjust their light transmission with the intensity of the daylight. Here we report a photochromic dye-sensitized solar cell (DSSC) based on donor-π-conjugated bridge-acceptor structures where the π-conjugated bridge is substituted for a diphenyl-naphthopyran photochromic unit.

Particle Consolidation and Electron Transport in Anatase TiO Nanocrystal Films.

A sequence of chemical vapor synthesis and thermal annealing in defined gas atmospheres was used to prepare phase-pure anatase TiO nanocrystal powders featuring clean surfaces and a narrow particle size distribution with a median particle diameter of 14.5 ± 0.5 nm.

Correlation between the Effectiveness of the Electron-Selective Contact and Photovoltaic Performance of Perovskite Solar Cells.

Metal halide perovskites (MHPs) are mixed electronic-ionic semiconductors with a remarkable photovoltaic potential that has led to a current world record efficiency surpassing 23%. This good performance stems from the combination of excellent light harvesting and relatively slow nonradiative recombination, which are characteristic of MHPs. However, taking advantage of these properties requires electron and hole transport materials that can efficiently extract charge with minimal photovoltage losses and recombination.

Understanding the Influence of Interface Morphology on the Performance of Perovskite Solar Cells.

In recent years, organo-halide perovskite solar cells have garnered a surge of interest due to their high performance and low-cost fabrication processing. Owing to the multilayer architecture of perovskite solar cells, interface not only has a pivotal role to play in performance, but also influences long-term stability. Here we have employed diverse morphologies of electron selective layer (ESL) to elucidate charge extraction behavior in perovskite solar cells.

Effects of Frequency Dependence of the External Quantum Efficiency of Perovskite Solar Cells.

Perovskite solar cells are known to show very long response time scales, on the order of milliseconds to seconds. This generates considerable doubt over the validity of the measured external quantum efficiency (EQE) and consequently the estimation of the short-circuit current density. We observe a variation as high as 10% in the values of the EQE of perovskite solar cells for different optical chopper frequencies between 10 and 500 Hz, indicating a need to establish well-defined protocols of EQE measurement.

Molecular Dynamics Analysis of Charge Transport in Ionic-Liquid Electrolytes Containing Added Salt with Mono, Di, and Trivalent Metal Cations.

Among many other applications, room-temperature ionic liquids (ILs) are used as electrolytes for storage and energy-conversion devices. In this work, we investigate, at the microscopic level, the structural and dynamical properties of 1-methyl-1-butyl-pyrrolidinium bis(trifluoromethanesulfonyl) imide [C PYR] [Tf N] IL-based electrolytes for metal-ion batteries. We carried out molecular dynamics simulations of electrolytes mainly composed of [C PYR] [Tf N] IL with the addition of M -[Tf N] metal salts (M=Li , Na , Ni , Zn , Co , Cd , and Al , n=1, 2, and 3) dissolved in the IL.

Electrochemical Reduction of Oxygen in Aprotic Ionic Liquids Containing Metal Cations: A Case Study on the Na-O system.

Metal-air batteries are intensively studied because of their high theoretical energy-storage capability. However, the fundamental science of electrodes, electrolytes, and reaction products still needs to be better understood. In this work, the ionic liquid N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR14TFSI) was chosen to study the influence of a wide range of metal cations (M ) on the electrochemical behavior of oxygen.

Charge Transfer Reductive Doping of Mesoporous TiO Photoelectrodes - Impact of Electrolyte Composition and Film Morphology.

Some material properties depend not only on synthesis and processing parameters, but may furthermore significantly change during operation. This is particularly true for high surface area materials. We used a combined electrochemical and spectroscopic approach to follow the changes of the photoelectrocatalytic activity and of the electronic semiconductor properties of mesoporous TiO films upon charge transfer reductive doping.