Lignin-derivable block copolymer micelle for effectively reinforcing and toughening polylactic acid.

The development of high-performance biodegradable polylactic acid (PLA) materials integrating high strength, malleability and toughness is desired but an ongoing challenge. In this work, a novel full-biobased block copolymer was designed and synthesized by grafting L (+)-lactide (L-LA) and ε-caprolactone (ε-CL) onto lignin via ring-opening polymerization. The obtained lignin-PLA-PCL block copolymer was composed of rigid lignin and poly (LA-CL) rubber segment, could self-assemble into uniform nano-micelles with average diameters of 80-100 nm regulated by simply altering copolymer content.

Achieving ultrahigh uranium/vanadium selectivity of poly(amidoxime) coupling MXene-enabled strong intermolecular interaction and separated photothermal interface.

Poly(amidoxime) (PAO) has been recognized as the most potential candidate for extracting uranium from seawater, owing to its merits of outstanding uranium affinity, low cost, and large-scale production. Despite remarkable achievements, existing PAO sorbents suffer from unsatisfactory uranium extraction efficiency and selectivity, as imposed by the inherently sluggish uranium adsorption kinetics and inevitable spatial configuration transition of amidoxime, which diminishes uranium affinity. Herein, we discover a facile and integrated design to elaborate a PAO/MXene nanocomposite that delivers ultrahigh and durable uranium/vanadium (U/V) selectivity.

Structure, properties, and fabric applicability of sustainable paper yarn with high washing stability.

This research provides an in-depth assessment of two paper yarn variants, examining their structural, functional, and performance characteristics. These yarns demonstrated favorable properties, including suitable linear density, twist, typical cellulosic functional groups as confirmed by Infrared spectroscopy, minimal hairiness, moisture transfer, and creditable mechanical strength. These yarns have flat layered cross-sections and grooved longitudinal surfaces.

Superstructured Optoionic Heterojunctions for Promoting Ion Pumping Inspired by Photoreceptor Cells.

Photoreceptor cells of vertebrates feature ultrastructural membranes interspersed with abundant photosensitive ion pumps to boost signal generation and realize high gain in dim light. In light of this, superstructured optoionic heterojunctions (SSOHs) with cation-selective nanochannels are developed for manipulating photo-driven ion pumping. A template-directed bottom-up strategy is adopted to sequentially assemble graphene oxide (GO) and PEDOT:PSS into heterogeneous membranes with sculptured superstructures, which feature programmable variation in membrane topography and contain a donor-acceptor interface capable of maintaining electron-hole separation upon photoillumination.

Deep analysis of adsorption isotherm for rapid sorption of Acid Blue 93 and Reactive Red 195 on reactive graphene.

Graphene-based adsorbent was prepared by adopting a green synthetic route via the chemical exfoliation of graphite and low-temperature thermal activation. Prepared reactive graphene (RG) was characterized through various techniques, and its adsorption capabilities for textile dye removal were investigated for Acid Blue-93 (AB) and Reactive Red-195 (RR) under different operational conditions. The dye sorption equilibrium and mechanism were comprehensively studied using isotherm and kinetic models and compared statistically to explain the sorption behavior.

Constructing Nitrogen-Doped Carbon Hierarchy Structure Derived from Metal-Organic Framework as High-Performance ORR Cathode Material for Zn-Air Battery.

The development of efficient and low-cost catalysts for cathodic oxygen reduction reaction (ORR) in Zn-air battery (ZAB) is a key factor in reducing costs and achieving industrialization. Here, a novel segregated CoNiPt alloy embedded in N-doped porous carbon with a nanoflowers (NFs)-like hierarchy structure is synthesized through pyrolyzing Hofmann-type metal-organic frameworks (MOFs). The unique hierarchical NFs structure exposes more active sites and facilitates the transportation of reaction intermediates, thus accelerating the reaction kinetics.

Strong and flexible lignocellulosic film fabricated via a feasible molecular remodeling strategy.

Biomass-derived sustainable film is a promising alternative to synthetic plastic, but hampered by strength, toughness and flexibility trade-off predicament. Here, a feasible and scalable strategy was proposed to fabricate strong and flexible lignocellulosic film through molecular reconstruction of cellulose and lignin. In this strategy, polyphenol lignin was absorbed and wrapped on the surface of cellulose fiber, forming strong interfacial adhesion and cohesion via intramolecular and intermolecular hydrogen bonding.

Homogeneous wet-spinning construction of skin-core structured PANI/cellulose conductive fibers for gas sensing and e-textile applications.

Fiber-based wearable electronic textiles have broad applications, but non-degradable substrates may contribute to electronic waste. The application of cellulose-based composite fibers as e-textiles is hindered by the lack of fast and effective preparation methods. Here, we fabricated polyaniline (PANI)/cellulose fibers (PC) with a unique skin-core structure through a wet-spinning homogeneous blended system.

Sandwich Fibrous PEG Encapsulations for Thermal Energy Storage.

Phase change materials (PCMs) textiles have been developed for personal thermal management (PTM) while limited loading amount of PCMs in textiles reduced thermal buffering effect. In this work, we proposed a sandwich fibrous encapsulation to store polyethylene glycol (PEG) with PEG loading amount of 45 wt %, which consisted of polyester (PET) fabrics with hydrophobic coating as protection layers, polyurethane (PU) nanofibrous membranes as barrier layers and PEG-loaded viscose fabric as a PCM-loaded layer. The leakage was totally avoided by controlling weak interfacial adhesion between protection layer and melting PEG.

Structural Analysis of Phase Change Materials (PCMs)/Expanded Graphite (EG) Composites and Their Thermal Behavior under Hot and Humid Conditions.

Expanded graphite (EG) has been used to store phase change materials (PCM) to enhance thermal conductivity and avoid leakage. However, systematic investigation on physical structure of various embedded PCMs in EG is not reported. Besides, the effect of environment on thermal behavior of PCM/EG composites has not been investigated yet.

Nanocellulose interface enhanced all-cellulose foam with controllable strength via a facile liquid phase exchange route.

The development of sustainable, biodegradable, non-toxic biomass foams with outstanding physical properties to replace traditional petroleum-based foams is urgent. In this work, we proposed a simple, efficient, and scalable approach to fabricate nanocellulose (NC) interface enhanced all-cellulose foam through ethanol liquid phase exchange and subsequent ambient drying. In this process, NCs served as reinforcer and binder were integrated with pulp fiber to improve cellulose interfibrillar bonding and interface adhesion between NCs and pulp microfibrils.

Fascinating polyphenol lignin extracted from sawdust via a green and recyclable solvent route.

Due to the complexity, heterogeneity and recalcitrant structure of lignin, the extraction of multifunctional lignin directly from lignocellulose is still a challenge. Here, a green and recyclable route was proposed to separate high-quality lignin and tailor its functionalities. Through tuning the components of deep eutectic solvent (DES) and separation procedures, DES extracted lignin (DESL) exhibited high purity of 99.

Enhancing the solubility and antimicrobial activity of cellulose through esterification modification using amino acid hydrochlorides.

Most amino acid molecules have good water solubility and are rich in functional groups, which makes them a promising derivatizing agent for cellulose. However, self-condensation of amino acids and low reaction efficiency always happen during esterification. Here, amino acid hydrochloride ([AA]Cl) is selected as raw material to synthesize cellulose amino acid ester (CAE).

Two-Dimensional Nanofluidic Membranes with Intercalated In-Plane Shortcuts for High-Performance Blue Energy Harvesting.

Two-dimensional nanofluidic membranes offer great opportunities for developing efficient and robust devices for ionic/water-nexus energy harvesting. However, low counterion concentration and long pathway through limited ionic flux restrict their output performance. Herein, it is demonstrated that rapid diffusion kinetics can be realized in two-dimensional nanofluidic membranes by introducing in-plane holes across nanosheets, which not only increase counterion concentration but also shorten pathway length through the membranes.

Bimetal-organic framework-derived nanotube@cellulose aerogels for peroxymonosulfate (PMS) activation.

Metal-organic frameworks (MOFs) and their derived powder catalysts are prone to agglomerate and difficult to recycle in water, thus resulting in their low utilization and secondary pollution in water treatment. Herein, a composite aerogel (CoFe0.8@NCNT@CA) loaded with bimetallic MOF-derived carbon nanotubes on cellulose aerogel was developed for activating peroxymonosulfate (PMS) to degrade tetracycline (TC).

Fabrication and Performance of Phase Change Thermoregulated Fiber from Bicomponent Melt Spinning.

High thermostability of phase change materials is the critical factor for producing phase change thermoregulated fiber (PCTF) by melt spinning. To achieve the production of PCTF from melt spinning, a composite phase change material with high thermostability was developed, and a sheath-core structure of PCTF was also developed from bicomponent melt spinning. The sheath layer was polyamide 6, and the core layer was made from a composite of polyethylene and paraffin.

Dityrosine-inspired photocrosslinking technique for 3D printing of silk fibroin-based composite hydrogel scaffolds.

Photoinduced self-crosslinking technology is a great facilitator of 3D bioprinting of silk fibroin (SF) by allowing rapid solidification of a deliberately formulated SF-based photocrosslinkable bioink. An SF-based, photocrosslinked hydrogel was fabricated with tyramine-modified sodium carboxymethyl cellulose (CMC-Na) as a co-crosslinkable constituent and Ru(bpy)Cl (Ru(II)) and potassium persulfate (KPS) as blue light photoinitiators. Photorheological studies demonstrated that the photocrosslinking and viscoelasticity of the composite could be tuned by varying the relative content of the two constituents.

Continuous Meter-Scale Wet-Spinning of Cornlike Composite Fibers for Eco-Friendly Multifunctional Electronics.

"Green" solvent-dissolved cellulose enables functional reuse of waste cotton fabrics. This work will not only achieve high-value utilization of biomass but also overcome microplastic pollution. There is a significant challenge in the continuous meter-scale synthesis of sensing fibers for commercial applications with high productivity.

Multifunctional Biosensors Made with Self-Healable Silk Fibroin Imitating Skin.

We report on robust silk fibroin (SF) gels fabricated by incorporating cellulose nanocrystals (SF/CNC) as a "tough" unit and photopolymerization of acrylamide as an "elastic" segment. The addition of CNC affects the refolding process of SF molecules controlled by nucleation via templating, resulting in a stable mesoscopic structure. The gel shows robust mechanical stability (88.

Highly sensitive self-healable strain biosensors based on robust transparent conductive nanocellulose nanocomposites: Relationship between percolated network and sensing mechanism.

The conventional skin sensor detection of human physiological signals can be an effective method for disease diagnosis and health monitoring, but the poor biocompatibility, low sensitivity and complex design largely limit their applications. Developing natural nanofiller-reinforced composites as strain biosensors is an appealing solution to reduce environmental impacts and overcome technical bottleneck. Herein, a versatile nature skin-inspired composite film as flexible strain biosensor was developed based on cellulose nanocrystals-polyaniline (CNC-PANI) composites by utilizing their percolated conductive network in polyvinyl alcohol (PVA) matrix.

Fabrication of Manganese Oxide/PTFE Hollow Fiber Membrane and Its Catalytic Degradation of Phenol.

P-aminophenol is a hazardous environmental pollutant that can remain in water in the natural environment for long periods due to its resistance to microbiological degradation. In order to decompose p-aminophenol in water, manganese oxide/polytetrafluoroethylene (PTFE) hollow fiber membranes were prepared. MnO and MnO were synthesized and stored in PTFE hollow fiber membranes by injecting MnSO·H2O, KMnO, NaOH, and HO solutions into the pores of the PTFE hollow fiber membrane.

A Review of Impact of Textile Research on Protective Face Masks.

COVID-19, classified as SARS-CoV-2, is causing an ongoing global pandemic. The pandemic has resulted in the loss of lives and has caused economic hardships. Most of the devices used to protect against the transmission of the novel COVID-19 disease are related to textile structures.

Recent strategies to improve the photoactivity of metal-organic frameworks.

Metal-organic frameworks (MOFs) are micro/mesoporous crystalline materials with high surface area, tunability, and compositional diversity and have been widely used in diverse applications, including catalysis. The rigid framework built from organic and inorganic functional structures can offer the merits of both, providing a platform to convert solar energy into usable or storable energy. Various approaches such as bandgap engineering, modulating the charge separation and increasing the intrinsic activity have been developed to improve the photocatalytic performance.

Magnetic cellulose nanocrystals hybrids reinforced phase change fiber composites with highly thermal energy storage efficiencies.

The intrinsic intermittence of solar energy raises the necessity for thermal energy storage (TES) systems to balance the contradiction between energy supply and demand energy. This work experimentally provides solid-liquid phase change materials (PCMs) with sufficient storage capacity and discharging rate to offer heating for agriculture products by enhancing heat transfer in phase change fiber composites (PCF). To achieve this, we prepared dipole responsive magnetic/solar-driven PCF composites reinforced with magnetic cellulose nanocrystals hybrids (MCNC).

Efficient removal of cationic dyes via activated carbon with ultrahigh specific surface derived from vinasse wastes.

In this work, a simple and feasible approach for converting waste vinasse generated from the alcohol industries into high value-added activated carbon (AC) was proposed. The obtained AC possessed abundant micropores with micropore volume of 0.9613 cm/g and ultrahigh specific surface areas (2015 m/g), indicating prominent adsorption capacity.