Composites comprising copper-doped zinc sulfide phosphor microparticles embedded in polydimethylsiloxane (ZnS:Cu-PDMS) have received significant attention over the past decade because of their bright and durable mechanoluminescence (ML); however, the underlying mechanism of this unique ML remains unclear. This study reports empirical and theoretical findings that confirm this ML is an electroluminescence (EL) of the ZnS:Cu phosphor induced by the triboelectricity generated at the ZnS:Cu microparticle-PDMS matrix interface. ZnS:Cu microparticles that exhibit bright ML are coated with alumina, an oxide with strong positive triboelectric properties; the contact separation between this oxide coating and PDMS, a polymer with strong negative triboelectric properties, produces sufficient interfacial triboelectricity to induce EL in ZnS:Cu microparticles.
View Article and Find Full Text PDFSerious climate changes and energy-related environmental problems are currently critical issues in the world. In order to reduce carbon emissions and save our environment, renewable energy harvesting technologies will serve as a key solution in the near future. Among them, triboelectric nanogenerators (TENGs), which is one of the most promising mechanical energy harvesters by means of contact electrification phenomenon, are explosively developing due to abundant wasting mechanical energy sources and a number of superior advantages in a wide availability and selection of materials, relatively simple device configurations, and low-cost processing.
View Article and Find Full Text PDFACS Appl Mater Interfaces
August 2022
Diphenylalanine (FF) is a piezoelectric material that is widely known for its high piezoelectric constant, self-assembly characteristics, and ease of manufacture. Because of its biocompatible nature, it is useful for implantable applications. However, its use in real applications is challenging because it degrades too easily in the body due to its solubility in water (0.
View Article and Find Full Text PDFTriboelectric nanogenerators have garnered significant attention as alternative power sources for wearable electronics owing to their simple structure, easy fabrication, low cost, and superior power output. In this study, a transparent, stretchable, and attachable triboelectric nanogenerator (TENG) is built with an advanced power output using plasticized polyvinyl chloride (PVC)-gel. The PVC-gel exhibit very high negative triboelectric properties and electrically insulating PVC became an electrically active material.
View Article and Find Full Text PDFTriboelectrification is a phenomenon that generates electric potential upon contact. Here, we report a viral particle capable of generating triboelectric potential. M13 bacteriophage is exploited to fabricate precisely defined chemical and physical structures.
View Article and Find Full Text PDFBiomolecular piezoelectric materials are considered a strong candidate material for biomedical applications due to their robust piezoelectricity, biocompatibility, and low dielectric property. The electric field has been found to affect tissue development and regeneration, and the piezoelectric properties of biological materials in the human body are known to provide electric fields by pressure. Therefore, great attention has been paid to the understanding of piezoelectricity in biological tissues and its building blocks.
View Article and Find Full Text PDFM13 bacteriophage (phage) nano- and microfibers were fabricated using electrospinning. Using liquid crystalline suspension of the phage, we successfully fabricated nano- and microscale pure phage fibers. Through a near field electrospinning process, we fabricated the desired phage fiber pattern with tunable direction and spacing.
View Article and Find Full Text PDFWith the development of technology, electronic devices are becoming more miniaturized and multifunctional. With the development of small electronic devices, they are changing from the conventional accessory type, which is portable, to the patchable type, which can be attached to a person's apparel or body, and the eatable/implantable type, which can be directly implanted into the human body. In this regard, it is necessary to address various technical issues, such as high-capacity/high-efficiency small-sized battery technology, component miniaturization, low power technology, flexible technology, and smart sensing technology.
View Article and Find Full Text PDFControlling the shape, geometry, density, and orientation of nanomaterials is critical to fabricate functional devices. However, there is limited control over the morphological and directional characteristics of presynthesized nanomaterials, which makes them unsuitable for developing devices for practical applications. Here, we address this challenge by demonstrating vertically aligned and polarized piezoelectric nanostructures from presynthesized biological piezoelectric nanofibers, M13 phage, with control over the orientation, polarization direction, microstructure morphology, and density using genetic engineering and template-assisted self-assembly process.
View Article and Find Full Text PDFPiezoelectric materials are excellent generators of clean energy, as they can harvest the ubiquitous vibrational and mechanical forces. We developed large-scale unidirectionally polarized, aligned diphenylalanine (FF) nanotubes and fabricated peptide-based piezoelectric energy harvesters. We first used the meniscus-driven self-assembly process to fabricate horizontally aligned FF nanotubes.
View Article and Find Full Text PDFIn this work, a sulfur (S) vacancy passivated monolayer MoS piezoelectric nanogenerator (PNG) is demonstrated, and its properties before and after S treatment are compared to investigate the effect of passivating S vacancy. The S vacancies are effectively passivated by using the S treatment process on the pristine MoS surface. The S vacancy site has a tendency to covalently bond with S functional groups; therefore, by capturing free electrons, a S atom will form a chemisorbed bond with the S vacancy site of MoS .
View Article and Find Full Text PDFRecently, piezoelectricity has been observed in 2D atomically thin materials, such as hexagonal-boron nitride, graphene, and transition metal dichalcogenides (TMDs). Specifically, exfoliated monolayer MoS exhibits a high piezoelectricity that is comparable to that of traditional piezoelectric materials. However, monolayer TMD materials are not regarded as suitable for actual piezoelectric devices due to their insufficient mechanical durability for sustained operation while Bernal-stacked bilayer TMD materials lose noncentrosymmetry and consequently piezoelectricity.
View Article and Find Full Text PDFNegatively polarized ferroelectric polymer β-P(VDF-TrFE) shows higher positive triboelectric properties than skin, which could lead to new medical applications. Kelvin force microscope measurements and triboelectric nanogenerator characterizations are performed to demonstrate this new property. In addition, how many negative charges are exchanged by contact electrification between the negatively polarized β-P(VDF-TrFE) and the skin is estimated.
View Article and Find Full Text PDFMonitoring of human activities can provide clinically relevant information pertaining to disease diagnostics, preventive medicine, care for patients with chronic diseases, rehabilitation, and prosthetics. The recognition of strains on human skin, induced by subtle movements of muscles in the internal organs, such as the esophagus and trachea, and the motion of joints, was demonstrated using a self-powered patchable strain sensor platform, composed on multifunctional nanocomposites of low-density silver nanowires with a conductive elastomer of poly(3,4-ethylenedioxythiophene):polystyrenesulfonate/polyurethane, with high sensitivity, stretchability, and optical transparency. The ultra-low-power consumption of the sensor, integrated with both a supercapacitor and a triboelectric nanogenerator into a single transparent stretchable platform based on the same nanocomposites, results in a self-powered monitoring system for skin strain.
View Article and Find Full Text PDFHere we report a fully flexible, foldable nanopatterned wearable triboelectric nanogenerator (WTNG) with high power-generating performance and mechanical robustness. Both a silver (Ag)-coated textile and polydimethylsiloxane (PDMS) nanopatterns based on ZnO nanorod arrays on a Ag-coated textile template were used as active triboelectric materials. A high output voltage and current of about 120 V and 65 μA, respectively, were observed from a nanopatterned PDMS-based WTNG, while an output voltage and current of 30 V and 20 μA were obtained by the non-nanopatterned flat PDMS-based WTNG under the same compressive force of 10 kgf.
View Article and Find Full Text PDFHydrophobic sponge structure-based triboelectric nanogenerators using an inverse opal structured film for sustainable energy harvesting over a wide range of humid atmosphere have been successfully demonstrated. The output voltage and current density reach a record value of 130 V and 0.10 mA cm(-2) , respectively, giving over 10-fold power enhancement, compared with the flat film-based triboelectric nanogenerator.
View Article and Find Full Text PDFA highly stretchable hybrid nanogenerator has been developed using a micro-patterned piezoelectric polymer P(VDF-TrFE), PDMS-CNT composite, and graphene nanosheets. Mechanical and thermal energies are simultaneously harvested from a single cell of the device. The hybrid nanogenerator exhibits high robustness behavior even after 30% stretching and generates very stable piezoelectric and pyroelectric power outputs due to micro-pattern designing.
View Article and Find Full Text PDFHere, we report the synthesis of lead-free single-crystalline two-dimensional (2D) vanadium(V)-doped ZnO nanosheets (NSs) and their application for high-performance flexible direct current (DC) power piezoelectric nanogenerators (NGs). The vertically aligned ZnO nanorods (NRs) converted to NS networks by V doping. Piezoresponse force microscopy studies reveal that vertical V-doped ZnO NS exhibit typical ferroelectricity with clear phase loops, butterfly, and well-defined hysteresis loops with a piezoelectric charge coefficient of up to 4 pm/V, even in 2D nanostructures.
View Article and Find Full Text PDFDirect current (DC) piezoelectric power generator is promising for the miniaturization of a power package and self-powering of nanorobots and body-implanted devices. Hence, we report the first use of two-dimensional (2D) zinc oxide (ZnO) nanostructure and an anionic nanoclay layer to generate piezoelectric DC output power. The device, made from 2D nanosheets and an anionic nanoclay layer heterojunction, has potential to be the smallest size power package, and could be used to charge wireless nano/micro scale systems without the use of rectifier circuits to convert alternating current into DC to store the generated power.
View Article and Find Full Text PDFWe report a coaxial fiber supercapacitor, which consists of carbon microfiber bundles coated with multiwalled carbon nanotubes as a core electrode and carbon nanofiber paper as an outer electrode. The ratio of electrode volumes was determined by a half-cell test of each electrode. The capacitance reached 6.
View Article and Find Full Text PDFWe report the synthesis of KNbO(3) nanowires (NWs) with a monoclinic phase, a phase not observed in bulk KNbO(3) materials. The monoclinic NWs can be synthesized via a hydrothermal method using metallic Nb as a precursor. The NWs are metastable, and thermal treatment at ∼450 °C changed the monoclinic phase into the orthorhombic phase, which is the most stable phase of KNbO(3) at room temperature.
View Article and Find Full Text PDFAn all-solution-processed flexible thin film piezoelectric nanogenerator is demonstrated using reactive zinc hydroxo-condensation and a screen-printing method. The highly elastic thin film allows the piezoelectric energy to be generated through the mechanical rolling and muscle stretching of the piezoelectric unit. This flexible all solution-processed nanogenerator is promising for use in future energy harvesters such as wearable human patches and mobile electronics.
View Article and Find Full Text PDFMechanical energy is a potential energy source for self-powered electronic devices. Due to their unique semiconducting and piezoelectric properties, wurtzite-structured nanomaterials have been considered as potential candidates for piezoelectric nanogenerators that convert mechanical energy into electricity. In the present work, we report on the growth of Ga-doped ZnO (GZO) nanorods and investigate the performance of nanogenerators fabricated from undoped ZnO (UZO) nanorods, low Ga-doped ZnO (LGZO) nanorods, and high Ga-doped ZnO (HGZO) nanorods.
View Article and Find Full Text PDF