Feasibility of using a dose-area product ratio as beam quality specifier for photon beams with small field sizes.

Purpose: To investigate the feasibility of using the ratio of dose-area product at 20 cm and 10 cm water depths (DAPR) as a beam quality specifier for radiotherapy photon beams with field diameter below 2 cm.

Methods: Dose-area product was determined as the integral of absorbed dose to water (D) over a surface larger than the beam size. 6 MV and 10 MV photon beams with field diameters from 0.

Intercomparison of active personal dosemeters in interventional radiology.

The use of active personal dosemeters (APD) in interventional radiology was evaluated by Working Group 9 (Radiation protection dosimetry of medical staff) of the CONRAD project, which is a Coordination Action supported by the European Commission within its sixth Framework Programme. Interventional radiology procedures can be very complex and they can lead to relatively high doses to personnel who stand close to the primary radiation field and are mostly exposed to radiation scattered by the patient. For the adequate dosimetry of the scattered photons, APDs must be able to respond to low-energy [10-100 keV] and pulsed radiation with relatively high instantaneous dose rates.