Surface-Enhanced Raman Spectroscopy Using a Silver Nanostar Substrate for Neonicotinoid Pesticides Detection.

Surface-enhanced Raman spectroscopy (SERS) has been introduced to detect pesticides at low concentrations and in complex matrices to help developing countries monitor pesticides to keep their concentrations at safe levels in food and the environment. SERS is a surface-sensitive technique that enhances the Raman signal of molecules absorbed on metal nanostructure surfaces and provides vibrational information for sample identification and quantitation. In this work, we report the use of silver nanostars (AgNs) as SERS-active elements to detect four neonicotinoid pesticides (thiacloprid, imidacloprid, thiamethoxam and nitenpyram).

Silver nanostar films for surface-enhanced Raman spectroscopy (SERS) of the pesticide imidacloprid.

Strategies for synthetic control of anisotropic metal nanostructures have grown in recent years in part due to their great potential for application as surface-enhanced Raman scattering (SERS) sensing substrates. It has been shown that SERS using silver substrates is a powerful tool for identification and qualification of trace chemical analysis on the basis of their unique molecular vibrations. In this work, we synthesized star-shaped silver nanostructures and fabricated SERS substrates to use the SERS enhancement of the Raman signal to detect neonicotinoid pesticides.

Rhenium anchored TiCT (MXene) nanosheets for electrocatalytic hydrogen production.

Atomically thin TiCT (MXene) nanosheets with rich termination groups, acting as active sites for effective functionalization, are used as an efficient solid support to host rhenium (Re) nanoparticles for the electrocatalytic hydrogen evolution reaction (HER). The newly designed electrocatalyst - Re nanoparticles anchored on TiCT MXene nanosheets (Re@TiCT ) - exhibited promising catalytic activity with a low overpotential of 298 mV to achieve a current density of 10 mV cm, while displaying excellent stability. In comparison, the pristine TiCT MXene requires higher overpotential of 584 mV to obtain the same current density.

Energy Interplay in Materials: Unlocking Next-Generation Synchronous Multisource Energy Conversion with Layered 2D Crystals.

Layered 2D crystals have unique properties and rich chemical and electronic diversity, with over 6000 2D crystals known and, in principle, millions of different stacked hybrid 2D crystals accessible. This diversity provides unique combinations of properties that can profoundly affect the future of energy conversion and harvesting devices. Notably, this includes catalysts, photovoltaics, superconductors, solar-fuel generators, and piezoelectric devices that will receive broad commercial uptake in the near future.

Heterointerface optimization in a covalent organic framework-on-MXene for high-performance capacitive deionization of oxygenated saline water.

Capacitive deionization (CDI) provides a promising option for affordable freshwater while simultaneously storing energy, but its large-scale application is usually limited owing to the poor performance of conventional materials in natural (oxygenated) saline water. Herein, we report heterointerface optimization in a covalent organic framework (COF)-on-MXene heterostructure achieving a high CDI performance for desalination of oxygenated saline water. The 2D heterostructure with the optimal core-shell architecture inherits the high conductivity and reversible ion intercalation/deintercalation ability of MXene, and the hierarchical porous structure, large porosity, and extraordinary redox capacity of COFs.

Plasma-Induced Nanocrystalline Domain Engineering and Surface Passivation in Mesoporous Chalcogenide Semiconductor Thin Films.

The synthesis of highly crystalline mesoporous materials is key to realizing high-performance chemical and biological sensors and optoelectronics. However, minimizing surface oxidation and enhancing the domain size without affecting the porous nanoarchitecture are daunting challenges. Herein, we report a hybrid technique that combines bottom-up electrochemical growth with top-down plasma treatment to produce mesoporous semiconductors with large crystalline domain sizes and excellent surface passivation.

A bright future for engineering piezoelectric 2D crystals.

The piezoelectric effect, mechanical-to-electrical and electrical-to-mechanical energy conversion, is highly beneficial for functional and responsive electronic devices. To fully exploit this property, miniaturization of piezoelectric materials is the subject of intense research. Indeed, select atomically thin 2D materials strongly exhibit the piezoelectric effect.

Ambient Fabrication of Organic-Inorganic Hybrid Perovskite Solar Cells.

Organic-inorganic hybrid perovskite solar cells (PSCs) have attracted significant attention in recent years due to their high-power conversion efficiency, simple fabrication, and low material cost. However, due to their high sensitivity to moisture and oxygen, high efficiency PSCs are mainly constructed in an inert environment. This has led to significant concerns associated with the long-term stability and manufacturing costs, which are some of the major limitations for the commercialization of this cutting-edge technology.

Spatially isolated redox processes enabled by ambipolar charge transport in multi-walled carbon nanotube mats.

This work demonstrates a simple dual-well device which enables spatially isolated solutions to undergo complementary redox reactions. The device functions by the ambipolar transport of charge carriers between two spatially isolated poly(dimethylsiloxane) (PDMS) microwells through an underlying multi-walled carbon nanotube (MWCNT) mat. This MWCNT mat enables charge carriers, produced from the decomposition of an analyte in one solution, to drive a redox reaction in a spatially isolated second colorimetric read-out solution via a potential difference between the wells.

Highly Dispersed Ru Nanoparticles on Boron-Doped Ti C T (MXene) Nanosheets for Synergistic Enhancement of Electrocatalytic Hydrogen Evolution.

2D-layered materials have attracted increasing attention as low-cost supports for developing active catalysts for the hydrogen evolution reaction (HER). In addition, atomically thin Ti C T (MXene) nanosheets have surface termination groups (T : F, O, and OH), which are active sites for effective functionalization. In this work, heteroatom (boron)-doped Ti C T (MXene) nanosheets are developed as an efficient solid support to host ultrasmall ruthenium (Ru) nanoparticles for electrocatalytic HER.

A Comparative Study on the Role of Polyvinylpyrrolidone Molecular Weight on the Functionalization of Various Carbon Nanotubes and Their Composites.

Polyvinylidene fluoride (PVDF) nanocomposites filled with polyvinylpyrrolidone (PVP) wrapped carbon nanotubes were prepared via a solution casting technique. The effect of the molecular weight (polymer chain length) of the PVP on the ability to wrap different nanotube structures and its impact towards nanotube dispersibility in the polymer matrix was explored. The study was conducted with PVP of four different molecular weights and nanotubes of three different structures.

1D-2D Synergistic MXene-Nanotubes Hybrids for Efficient Perovskite Solar Cells.

Incorporation of 2D MXenes into the electron transporting layer (ETL) of perovskite solar cells (PSCs) has been shown to deliver high-efficiency photovoltaic (PV) devices. However, the ambient fabrication of the ETLs leads to unavoidable deterioration in the electrical properties of MXene due to oxidation. Herein, sorted metallic single-walled carbon nanotubes (m-SWCNTs) are employed to prepare MXene/SWCNTs composites to improve the PV performance of PSCs.

Interfacial piezoelectric polarization locking in printable TiCT MXene-fluoropolymer composites.

Piezoelectric fluoropolymers convert mechanical energy to electricity and are ideal for sustainably providing power to electronic devices. To convert mechanical energy, a net polarization must be induced in the fluoropolymer, which is currently achieved via an energy-intensive electrical poling process. Eliminating this process will enable the low-energy production of efficient energy harvesters.

Nanoscale Patterning of Carbon Nanotubes: Techniques, Applications, and Future.

Carbon nanotube (CNT) devices and electronics are achieving maturity and directly competing or surpassing devices that use conventional materials. CNTs have demonstrated ballistic conduction, minimal scaling effects, high current capacity, low power requirements, and excellent optical/photonic properties; making them the ideal candidate for a new material to replace conventional materials in next-generation electronic and photonic systems. CNTs also demonstrate high stability and flexibility, allowing them to be used in flexible, printable, and/or biocompatible electronics.

Efficiency and stability enhancement of perovskite solar cells using reduced graphene oxide derived from earth-abundant natural graphite.

Graphene - two-dimensional (2D) sheets of carbon atoms linked in a honeycomb pattern - has unique properties that exhibit great promise for various applications including solar cells. Herein we prepared two-dimensional (2D) reduced graphene oxide (rGO) nanosheets from naturally abundant graphite flakes (obtained from Tuv aimag in Mongolia) using solution processed chemical oxidation and thermal reduction methods. As a proof of concept, we used our rGO as a hole transporting material (HTM) in perovskite solar cells (PSCs).

Matrix metalloproteinase-2-targeted superparamagnetic FeO-PEG-G5-MMP2@Ce6 nanoprobes for dual-mode imaging and photodynamic therapy.

This work explored the application of matrix metalloproteinase 2-targeted superparamagnetic nanoprobes for magnetic resonance imaging (MRI), near infrared (NIR) fluorescence imaging and photodynamic therapy of tumors. PEG, PAMAM (G5) and matrix metalloproteinase 2 (MMP2) were attached to the surface of carboxylated Fe3O4 nanoparticles (NPs) using a chemical coupling method and then finally loaded with the photosensitizer chlorin e6 (Ce6). In vitro and in vivo experiments demonstrated that the Fe3O4-PEG-G5-MMP2@Ce6 nanoprobes exhibited excellent stability, precise tumor targeting and biocompatibility.

Enhancing Upconversion Luminescence Efficiency via Chiral β-NaYF:Er/Yb Microcrystals Based on Mesoscale Regulation.

Chirality, universal characteristics of nature, introduces asymmetry in synthetic materials. Revealing the microscopic asymmetry of macroscopically symmetric materials is the key to control the growth of chiral materials and give full play to their application potential. Materials for photon upconversion (UC) are of great interest for many applications owing to their anti-Stoke luminescence process, especially for chiral UC materials.

Electrically Sorted Single-Walled Carbon Nanotubes-Based Electron Transporting Layers for Perovskite Solar Cells.

Incorporation of as prepared single-walled carbon nanotubes (SWCNTs) into the electron transporting layer (ETL) is an effective strategy to enhance the photovoltaic performance of perovskite solar cells (PSCs). However, the fundamental role of the SWCNT electrical types in the PSCs is not well understood. Herein, we prepared semiconducting (s-) and metallic (m-) SWCNT families and integrated them into TiO photoelectrodes of the PSCs.

Synthesis, purification, properties and characterization of sorted single-walled carbon nanotubes.

Single-walled carbon nanotubes (SWCNTs) have attracted significant attention due to their outstanding mechanical, chemical and optoelectronic properties, which makes them promising candidates for use in a wide range of applications. However, as-produced SWCNTs have a wide distribution of various chiral species with different properties (i.e.

Improved Application of Carbon Nanotube Atomic Force Microscopy Probes Using PeakForce Tapping Mode.

In this work PeakForce tapping (PFT) imaging was demonstrated with carbon nanotube atomic force microscopy (CNT-AFM) probes; this imaging mode shows great promise for providing simple, stable imaging with CNT-AFM probes, which can be difficult to apply. The PFT mode is used with CNT-AFM probes to demonstrate high resolution imaging on samples with features in the nanometre range, including a Nioprobe calibration sample and gold nanoparticles on silicon, in order to demonstrate the modes imaging effectiveness, and to also aid in determining the diameter of very thin CNT-AFM probes. In addition to stable operation, the PFT mode is shown to eliminate "ringing" artefacts that often affect CNT-AFM probes in tapping mode near steep vertical step edges.

Recent progress in magnetic nanoparticles: synthesis, properties, and applications.

The rapid development of advanced nanotechnology has continuously changed many aspects of society. One important nanostructured material, magnetic nanoparticles (NPs), has applications in many areas including clean energy, biology and engineering because of their special magnetic properties. The synthesis of magnetic nanomaterials with desired sizes and morphology has attracted great attention.

Efficiency Improvement Using Molybdenum Disulphide Interlayers in Single-Wall Carbon Nanotube/Silicon Solar Cells.

Molybdenum disulphide (MoS₂) is one of the most studied and widely applied nanomaterials from the layered transition-metal dichalcogenides (TMDs) semiconductor family. MoS₂ has a large carrier diffusion length and a high carrier mobility. Combining a layered structure of single-wall carbon nanotube (SWCNT) and MoS₂ with n-type silicon (n-Si) provided novel SWCNT/n-Si photovoltaic devices.

Direct-Patterning SWCNTs Using Dip Pen Nanolithography for SWCNT/Silicon Solar Cells.

Dip pen nanolithography (DPN) is used to pattern single-walled carbon nanotube (SWCNT) lines between the n-type Si and SWCNT film in SWCNT/Si solar cells. The SWCNT ink composition, loading, and DPN pretreatment are optimized to improve patterning. This improved DPN technique is then used to successfully pattern >1 mm long SWCNT lines consistently.

Electrocatalytic Activity of a 2D Phosphorene-Based Heteroelectrocatalyst for Photoelectrochemical Cells.

Research into efficient synthesis, fundamental properties, and potential applications of phosphorene is currently the subject of intense investigation. Herein, solution-processed phosphorene or few-layer black phosphorus (FL-BP) sheets are prepared using a microwave exfoliation method and used in photoelectrochemical cells. Based on experimental and theoretical (DFT) studies, the FL-BP sheets are found to act as catalytically active sites and show excellent electrocatalytic activity for triiodide reduction in dye-sensitized solar cells.