10 kHz two-color OH PLIF thermometry using a single burst-mode OPO.

10-kHz hydroxyl radical (OH) two-color planar laser-induced fluorescence (TC-PLIF) thermometry was demonstrated with a single burst-mode optical parametric oscillator (OPO) and a single camera. A fast, dual-wavelength switched seed laser enabled a high-energy, high-repetition-rate burst-mode laser to generate two 10-kHz pulse trains at wavelengths of ${\sim}{354.8}\;{\rm nm}$.

100 kHz krypton-based flow tagging velocimetry in a high-speed flow.

Krypton (Kr)-based tagging velocimetry is demonstrated in a / jet at 100 kHz repetition rate using a custom-built burst-mode laser and optical parametric oscillator (OPO) system. At this repetition rate, the wavelength-tunable, narrow linewidth laser platform can generate up to 7 mJ/pulse at resonant Kr two-photon-excitation wavelengths. Following a comprehensive study, we have identified the 212.

100 kHz PLEET velocimetry in a Mach-6 Ludwieg tube.

Picosecond laser electronic-excitation tagging (PLEET) was demonstrated in a Mach-6 Ludwieg tube at a repetition rate of 100 kHz using a 1064 nm, 100 ps burst-mode laser. The system performance of high-speed velocimetry in unseeded air and nitrogen Mach-6 flows at a static pressure in the range of 5-20 torr were evaluated. Based on time-resolved freestream flow measurements and computational fluid dynamics (CFD) calculations, we concluded that the measurement uncertainty of 100 kHz PLEET measurement for Mach 6 freestream flow condition is ∼1%.

100 kHz krypton planar laser-induced fluorescence imaging.

Krypton planar laser-induced fluorescence (Kr PLIF) was demonstrated at a repetition rate of 100 kHz. To achieve this increased rate, a custom injection-seeded optical parametric oscillator was built to efficiently convert the 355 nm output of a high-energy, high-repetition-rate nanosecond burst-mode laser to 212.56 nm to excite Kr from the ground to the 5[1/2] electronic state.

Time-Resolved Measurements of Turbulent Mixing in Shock-Driven Variable-Density Flows.

Recent developments of burst-mode lasers and imaging systems have opened new realms of simultaneous diagnostics for velocity and density fields at a rate of 1 kHz-1 MHz. These enable the exploration of previously unimaginable shock-driven turbulent flow fields that are of significant importance to problems in high-energy density physics. The current work presents novel measurements using simultaneous measurements of velocity and scalar fields at 60 kHz to investigate Richtmyer-Meshkov instability (RMI) in a spatio-temporal approach.

Development of a three-legged, high-speed, burst-mode laser system for simultaneous measurements of velocity and scalars in reacting flows.

We report the development of a three-legged, high-speed, high-energy, burst-mode laser system for the simultaneous measurement of velocity and key combustion species in turbulent reacting flows. The laser system is designed to simultaneously amplify a four-pulse sequence [including a doublet pulse for particle image velocimetry (PIV) measurements] with variable pulse separations at a repetition rate up to 500 kHz and a burst duration of 1-10 ms. With the three-legged, burst-mode laser system, we demonstrate simultaneous measurements of velocity using PIV and planar laser-induced fluorescence imaging of hydroxyl and formaldehyde in a turbulent jet flame.

20 kHz CHO and OH PLIF with stereo PIV.

Planar laser-induced fluorescence (PLIF) of hydroxyl (OH) and formaldehyde (CHO) radicals was performed alongside stereo particle image velocimetry (PIV) at a 20 kHz repetition rate in a highly turbulent Bunsen flame. A dual-pulse burst-mode laser generated envelopes of 532 nm pulse pairs for PIV as well as a pair of 355 nm pulses, the first of which was used for CHO PLIF. A diode-pumped solid-state Nd:YAG/dye laser system produced the excitation beam for the OH PLIF.

High-repetition-rate interferometric Rayleigh scattering for flow-velocity measurements.

High-repetition-rate interferometric-Rayleigh-scattering (IRS) velocimetry is implemented and demonstrated for non-intrusive, high-speed flow-velocity measurements. High temporal resolution is obtained with a quasi-continuous burst-mode laser that is capable of providing bursts of 10-msec duration with pulse widths of 10-100 nsec, pulse energy > 100 mJ at 532 nm, and repetition rates of 10-100 kHz. Coupled with a high-speed camera system, the IRS method is based on imaging the flow field though an etalon with 8-GHz free spectral range and capturing the Doppler shift of the Rayleigh-scattered light from the flow at multiple points having constructive interference.

Seedless velocimetry at 100 kHz with picosecond-laser electronic-excitation tagging.

Picosecond-laser electronic-excitation tagging (PLEET), a seedless picosecond-laser-based velocimetry technique, is demonstrated in non-reactive flows at a repetition rate of 100 kHz with a 1064 nm, 100 ps burst-mode laser. The fluorescence lifetime of the PLEET signal was measured in nitrogen, and the laser heating effects were analyzed. PLEET experiments with a free jet of nitrogen show the ability to measure multi-point flow velocity fluctuations at a 100 kHz detection rate or higher.