Enhancing Methylene Blue Dye Removal using pyrolyzed Mytella falcata Shells: Characterization, Kinetics, Isotherm, and Regeneration through Photolysis and Peroxidation.

The potential of pyrolyzed Mytella falcata shells as an adsorbent for removing methylene blue dye molecules from aqueous solutions was investigated. The study found that the adsorbent produced at 600 °C of pyrolysis temperature, with an adsorbent mass of 0.5 g, particle diameter of 0.

Environmental Planning and Non-Communicable Diseases: A Systematic Review on the Role of the Metabolomic Profile.

Non-communicable diseases (NCDs) are the major cause of death worldwide and have economic, psychological, and social impacts. Air pollution is the second, contributing to NCDs-related deaths. Metabolomics are a useful diagnostic and prognostic tool for NCDs, as they allow the identification of biomarkers linked to emerging pathologic processes.

Synthesis of Esters Containing Cinnamoyl Motif with Potential Larvicide Action: A Computational, Ecotoxicity and in Vitro Cytotoxicity Assessments.

An increasing morbidity and mortality rate has been related to arboviruses transmitted by Aedes aegypti. Compounds with cinnamoyl moiety represent an alternative against mosquitos, considering their larvicidal activity. This study aimed to assess the larvicidal activity of cinnamic ester derivates against Aedes aegypti larvae, along with evaluating their toxicity effect to assess its safety as a larvicide.

Decontamination of real urban sewage-comparison between Fenton and electrochemical oxidation.

Advanced oxidation processes have been used for wastewater treatment due to their capacity to reduce the organic loading and for their fast reactions. In this paper, we explore the viability of isolated and sequential use of electrochemical oxidation and Fenton processes into treatment of real raw urban sewage. The electrochemical process was carried out using DSA®-Cl electrodes and factorial planning in order to investigate the influence of pH, current density, and electrolyte.

Propolis in Oral Healthcare: Antibacterial Activity of a Composite Resin Enriched With Brazilian Red Propolis.

The aim of this study was to obtain a Brazilian red propolis (BRP) enriched composite resin and to perform the characterization of its antibacterial activity, mechanical, and physical-chemical properties. Brazilian red propolis ethyl acetate extract (EABRP) was characterized by LC-ESI-Orbitrap-FTMS, UPLC-DAD, antibacterial activity, total flavonoids content, and radical scavenging capacity. BRP was incorporated to a commercial composite resin (RC) to obtain BRP enriched composite at 0.

Interaction between humic substances and arsenic species simulating environmental conditions.

The importance of evaluating how natural organic matter influences the mobility of arsenic species in an ecosystem is an environmental concern. This work aimed to evaluate the interaction between humic substances (HS) and four arsenic species of high toxicity [As(III), As(V), MMA(V), and DMA(V)] (HS-As) under the influence of HS concentration and pH. Next, the complexing capacity (CC) of HS by As(III) was determined in function of pH, ionic strength and co-existing ions.

Effluent treatment using activated carbon adsorbents: a bibliometric analysis of recent literature.

Agricultural practices and industrial and human discharges play an important role in the generation of highly contaminated effluents, which becomes a threat to the environment. The persistence of many of these compounds to conventional treatments in recent years has meant that numerous efforts have been devoted to the proposal of new selective materials that allow the removal of these contaminants by adsorption. In addition, bibliometric studies have grown as powerful tools to indicate trends in innovation.

The electro-oxidation of tetracycline hydrochloride in commercial DSA® modified by electrodeposited platinum.

Tetracycline hydrochloride (TCH) electro-oxidation by commercial DSA® and commercial DSA® modified by platinum electrodeposition was evaluated. The electrodeposition was carried out at constant potential (E = - 0.73 V vs RHE) in different times (1200, 2400, and 4800 s).

Comprehensive multivariate correlations between climatic effect, metabolite-profile, antioxidant capacity and antibacterial activity of Brazilian red propolis metabolites during seasonal study.

The standardization of apiceutical products like as propolis extracts has been widely debated worldwide and variations in the propolis chemical composition are still very relevant topics for use-standardized of different propolis-type as medication by much of the world's population. The present manuscript discuss important issues related to the climate effect and variations in propolis metabolite-profiling changes, antioxidant capacity and variations of the antibacterial activity of the Brazilian red propolis metabolites using comprehensive multivariate correlations. It was observed the increasing of guttiferones concentrations during the intense drought period and drastic decreasing in rainy period.

Water-soluble carboxymethylchitosan used as corrosion inhibitor for carbon steel in saline medium.

Biodegradability and ecotoxicity of products used in oil industry are of great relevance and corrosion inhibitor could not be an exception. In earlier reports, chitosan and some derivatives were evaluated as corrosion inhibitors at acid pH, mainly due to polymer solubility. An eco-friendly corrosion inhibitor with water solubility in all pH range should be ideal, as well as that could act under the high salinity of oil field environment.

Efficiency and toxicity: comparison between the Fenton and electrochemical processes.

This study aimed to determine the best method to treat a textile effluent containing the dye basic blue 99 (BB). Treatments by the electrochemical and the Fenton processes were compared by means of a 2(3) experimental design, and the interaction of experimental conditions for BB oxidation were determined. The electrochemical treatment gave better results in the presence of NaCl as electrolyte and high current density (30 mA cm(-2)); the Fenton reaction provided better results at H2O2 and Fe(2+) concentrations of 10 mg L(-1) and 0.

Effect of alcoholic beverages on surface roughness and microhardness of dental composites.

The aim of this study was to evaluate the microhardness and surface roughness of composite resins immersed in alcoholic beverages. Three composite resins were used: Durafill (Heraeus Kulzer), Z250 (3M-ESPE) and Z350 XT (3M-ESPE). The inital surface roughness and microhardness were measured.

Evaluation of the Surface Roughness and Microleakage of Dental Composites Exposed to Different Beverages.

Aim: The purpose of this study was to determine the effect of different solutions cola soft drink (CSD) and coffee on roughness and microleakage of composite resin restorations.

Materials And Methods: Sixty bovine incisors were prepared and restored using Filtek Z350 XT (3M/ESPE) nanoparticulate resin. The samples were divided into three groups (n = 20): A (control)-Immersion in artificial saliva (14 days); B: Immersion in coffee (14 days), for 15 minutes (3x/day) and C: Immersion in CSD for 14 days (3x/day).

Development of a system for treatment of coconut industry wastewater using electrochemical processes followed by Fenton reaction.

The coconut processing industry generates a significant amount of liquid waste. New technologies targeting the treatment of industrial effluents have emerged, including advanced oxidation processes, the Fenton reaction, and electrochemical processes, which produce strong oxidizing species to remove organic matter. In this study we combined the Fenton reaction and electrochemical process to treat wastewater generated by the coconut industry.

Analysis of roughness and surface hardness of a dental composite using atomic force microscopy and microhardness testing.

The objective of this study was to evaluate the influence of a cola soft drink (CSD) and coffee on the microhardness and surface roughness of composite resin. Fifty cavities were prepared on the vestibular surface of bovine incisors and restored with nanoparticulate resin. The teeth were divided into five groups (n = 10): group A (control), immersion in artificial saliva (AS) for 14 days; group B, immersion in coffee for 15 min (3×/day) for 7 days followed by immersion in AS for another 7 days; group C, immersion in CSD for 15 min (3×/day) for 7 days followed by immersion in AS for another 7 days; group D, immersion in AS for 7 days, immersion in coffee for 15 min (3×/day) for 7 days; group E, immersion in AS for 7 days, immersion in CSD for 15 min (3×/day) for 7 days.

Evaluation of surface roughness of microhybrid and nanofilled composites after pH-cycling and simulated toothbrushing.

Aim: This study evaluated the surface roughness patterns of two resin-based composite restorative materials, a microhybrid (Filtek Z250, 3M ESPE) and a nanofilled (Filtek Supreme, 3M ESPE), subjected to a regimen that simulated dynamic pH-cycling and toothbrushing.

Methods And Materials: Twelve standardized cylindrical specimens of each resin-based composite material were prepared, finished, and mechanically polished. The experimental units were submitted to a pH-cycling regimen followed by 50,000 toothbrushing cycles, after which the surface roughness was measured using an atomic force microscope (AFM).

Effect of the insertion and polymerization technique in composite resin restorations: analysis of marginal gap by atomic force microscopy.

This in vitro study evaluated the marginal gap at the composite tooth/resin interface in class V cavities under the influence of two insertion techniques and a curing system by means of atomic force microscopy (AFM). Forty enamel and dentin cavities were prepared on the buccal surface in bovine teeth with quadratic forms measuring 2 mm × 2 mm and depth of 1.5 mm.

Atomic force microscopy of removal of dentin smear layers.

The regular periodontal practice of scaling and root planing produces a smear layer on the root surface that is detrimental to the readhesion of tissues during subsequent regeneration therapy. Although it has been demonstrated that gels containing the chelating agent ethylenediaminetetraacetic acid (EDTA) can assist in the removal of this contaminating layer, no quantitative method is yet available by which to evaluate the efficiency of the treatment. In this article, the power of atomic force microscopy (AFM) as a technique for monitoring and mapping the surfaces of dentinal roots is demonstrated.

The application of electrochemical technology to the remediation of oily wastewater.

The successful application of electrochemical technology, employing a dimensionally stable anode (DSA((R))), for the remediation of wastewater from the oil extraction industry has been demonstrated. Samples from the oil-water separation box of an effluent treatment plant were submitted to voltammetry, chronoamperometry and electrolysis studies using a DSA anode of nominal composition Ti/Ru(0.34)Ti(0.