Analysis of the Survival of Dental Implants Installed in Reconstructed Maxilla With Autogenous Iliac Crest Graft: 7- to 9-Year Follow-Up.

The aim of this study was to analyze the survival of dental implants installed in maxillae reconstructed with autogenous iliac crest grafts and to assess patient satisfaction with the treatment by means of a questionnaire. The study conducted medical record reviews and clinical/radiographic assessments of 10 patients with severe maxillary atrophy who had undergone reconstruction with autogenous iliac crest grafts and rehabilitation with dental implants between 2008 and 2011. Patients were assessed for the survival of the implants, considering implant diameter and length, smoking status, diagnosis of diabetes, type of loss, and region of implant loss.

Retraction: Bacterial adhesion and colonization differences between zirconia and titanium implant abutments: an human study.

[This retracts the article on p. 217 in vol. 42, PMID: 23346465.

Comparative evaluation of different fixation techniques of the sagittal split ramus osteotomy in 10 mm advancements: Mechanical testing and screw insertion torque.

Purpose: To compare the mechanical characteristics of five techniques for the functionally stable fixation of simulated sagittal split ramus osteotomy with 10 mm of advancement and to evaluate the screw insertion torque.

Materials And Methods: Fifty polyurethane hemimandibles with sagittal split ramus osteotomy and containing an advancement of 10 mm fixed and distributed as follows: Customized 3D Plate Group: 1 customized 3D miniplate; 4-Hole Plate Group: 2 miniplates with 4 holes; 6-Hole Plate Group: 2 miniplates with 6 holes; Hybrid Group: 1 flat miniplate with 4 holes and 1 bicortical screw; and Bicortical Screw Group: 3 bicortical screws. We conducted a mechanical test using vertical linear loading with a displacement velocity of 1 mm/min on a universal testing machine and assessed the screw insertion torque using a digital torque wrench.

Mechanical evaluation of the use of conventional and locking miniplate/screw systems used in sagittal split ramus osteotomy.

Objectives: The aim of this study was to compare the mechanical resistance of four different osteosyntheses modeled in two different sagittal split ramus osteotomy (SSRO) designs and to determine the linear loading in a universal testing machine.

Materials And Methods: An experiment was conducted with 40 polyurethane hemimandibles. The samples were divided into two groups based on osteotomy design; Group I, right angles between osteotomies and Group II, no right angles between osteotomies.

Stability of the prosthetic screws of three types of craniofacial prostheses retention systems.

Objectives: This study aimed to evaluate the stability of prosthetic screws from three types of craniofacial prostheses retention systems (bar-clip, ball/O-ring, and magnet) when submitted to mechanical cycling.

Materials And Methods: Twelve models of acrylic resin were used with implants placed 20 mm from each other and separated into three groups: (1) bar-clip (Sistema INP, São Paulo, Brazil), (2) ball/O-ring (Sistema INP), and (3) magnet (Metalmag, São Paulo, Brazil), with four samples in each group. Each sample underwent a mechanical cycling removal and insertion test (=0.

Retention and Mechanical Behavior of Attachment Systems for Implant-Retained Auricular Prostheses.

Objective: Auricular prostheses are artificial substitutes for facial defects. The retention of these has often been a problem. This study aimed to evaluate the mechanical behavior of 3 retained auricular prosthetic connections when submitted to a mechanical cycling test.

8-10 year follow-up survival of dental implants in maxillae with or without autogenous bone graft reconstruction.

The aim of this research was to ascertain the survival of implants installed in the atrophic maxillae of patients treated with or without autogenous bone graft at 8 to 10 years of follow-up. A retrospective study was conducted using clinical and imaging analysis. 42 adult patients were selected, treated with osseointegrated implants in a fixed maxillary prosthesis model with suprastructure using 6 to 8 implants; of these, 22 underwent reconstruction with a bone graft taken from the anterior iliac crest and 20 were treated without any type of bone graft.

In Vitro Mechanical Analysis of Different Techniques of Internal Fixation of Combined Mandibular Angle and Body Fractures.

Purpose: To evaluate in vitro resistance of 5 techniques of internal fixation of bilateral fractures involving the mandibular angle and body.

Materials And Methods: Twenty-five polyurethane mandibles were used as substrates, fixed with a 2-mm fixation system, and divided into 5 groups: I, 1 4-hole plate, without intermediate space, in the neutral zone of the mandibular body and another similar plate in the external oblique ridge of the contralateral mandibular angle; II, 1 6-hole plate, with intermediate space, in the neutral zone of the mandibular body and a similar plate in the external oblique ridge of the left mandibular angle; III, 1 4-hole locking plate, with intermediate space, in the right neutral zone and another similar plate in the left external oblique ridge; IV, 2 4-hole plates, with intermediate space, one in the tension zone and the other in the compression zone of the mandibular body, and 1 4-hole plate, with intermediate space, in the external oblique ridge of the contralateral mandibular angle; V, 2 4-hole plates with intermediate space, one in the tension zone and the other in the compression zone of the mandibular body and similarly in the buccal side of the left mandibular angle. Mandibles were subjected to vertical linear load tests by a mechanical testing machine (Instron 4411, Instron Corp, Norwood, MA) to record peak load and load for displacements of 3, 5, and 7 mm.

An in vitro comparison between two different designs of sagittal split ramus osteotomy.

Objectives: To evaluate the influence of the type of osteotomy in the inferior aspect of the mandible on the mechanical performance.

Materials And Methods: The study was performed on 20 polyurethane hemimandibles. A sagittal split ramus osteotomy (SSRO) was designed in 10 hemimandibles (group 1) with a vertical osteotomy in the buccal side (second molar level) and final osteotomy was performed horizontally on the lingual aspect, while the mandible body osteotomy was finalized as a straight osteotomy in the basilar area, perpendicular to the body.

Accuracy in the Diagnosis of the Mental Nerve Loop. A Comparative Study Between Panoramic Radiography and Cone Beam Computed Tomography.

Dental implant and chin osteotomy are executed on the mandible body and the mental nerve is an important anatomical limit. The aim of this research was to know the position of the mental nerve loop comparing result in panoramic radiography and cone beam computed tomography. We analyzed 94 hemimandibles and the patient sample comprised female and male subjects of ages ranging from 18 to 52 years (mean age, 35 years) selected randomly from the database of patients at the Division of Oral Radiology at Piracicaba Dental School State University of Campinas; the anterior loop (AL) of the mental nerve was evaluated regarding the presence or absence, which was classified as rectilinear or curvilinear and measurement of its length was obtained.

Photoelastic analysis of fixed partial prosthesis crown height and implant length on distribution of stress in two dental implant systems.

The aim of this study was to evaluate by photoelastic analysis stress distribution on short and long implants of two dental implant systems with 2-unit implant-supported fixed partial prostheses of 8 mm and 13 mm heights. Sixteen photoelastic models were divided into 4 groups: I: long implant (5 × 11 mm) (Neodent), II: long implant (5 × 11 mm) (Bicon), III: short implant (5 × 6 mm) (Neodent), and IV: short implants (5 × 6 mm) (Bicon). The models were positioned in a circular polariscope associated with a cell load and static axial (0.

Photoelastic evaluation of two different sagittal split ramus osteotomies in advancement surgery.

The aim of this study was to establish the influence of the design of the sagittal split ramus osteotomy (SSRO) on stress distribution on the osteosynthesis in a photoelastic resin model. Two polyurethane hemimandibles were used to perform the osteotomies, tilted in the lateral sector of the first/second molar (group I) and the other descending downwards and laterally from the first molar (group II), with no higher angle. Six replicas of each were made in photoelastic resin and stabilized with a plate and 5 mm monocortical screws in a standardized way.

Influence of the design in sagittal split ramus osteotomy on the mechanical behavior.

The aim of this study was to determine the influence of the design of the sagittal split ramus osteotomy (SSRO) on the mechanical resistance to vertical forces. An in vitro study was designed for 30 test specimens. Two osteotomy models were made on two polyurethane hemimandibles, where group I presented a SSRO with an angle at vestibular level between both molars and group II presented a linear SSRO towards the basilar border.

Bisphosphonate-related osteonecrosis of the jaw: a review of the literature.

Bisphosphonates (BPs) are a class of drugs used to treat osteoporosis and malignant bone metastasis. BPs show high binding capacity to the bone matrix, especially in sites of active bone metabolism. The American Society for Bone and Mineral Research defines BRONJ as "an area of exposed bone in the maxillofacial region that has not healed within 8 weeks after identification by a healthcare provider in a patient who is receiving or has been exposed to a bisphosphonate and has not had radiation therapy to the craniofacial region.

Bacterial contamination along implant-abutment interface in external and internal-hex dental implants.

The aim of this research was to evaluate bacterial contamination along the implant-abutment interface in relation to the size of the interface. 80 brand name implants were used, 40 internal-hex and 40 external-hex. The implants were handled in a sterile atmosphere inside a box, where they were inoculated with 0.

Facial and cervical emphysema after oral surgery: a rare case.

The purpose is to report extensive emphysema resulting from a common procedure in oral surgery. Surgical emphysema developed in a 23-year-old female after removal of a mandible third molar using a high-speed dental hand-piece. The patient was maintained in hospital room and submitted to a medical protocol with antibiotic treatment.

Maxillary sinus floor augmentation using blood without graft material. Preliminary results in 10 patients.

Purpose: The maxillary sinus lift is recognized and stable, and there have been different innovations to optimize the technique. The aim of this study was to investigate the maxillary sinus lift technique with the use of a blood clot and without the use of a bone graft.

Materials And Methods: Ten patients were recruited for a unilateral sinus lift; patients without sinus pathology or other contraindication were selected.

Bone repair is influenced by different particle sizes of anorganic bovine bone matrix: a histologic and radiographic study in vivo.

Purpose: The aim of this study was to analyze histologically and radiographically the influence of particle size of anorganic bovine bone matrix (ABBM) on bone repair.

Materials And Methods: Four calvarial defects of 8 mm each were prepared in 18 adult New Zealand rabbits. The defects were then filled with either particulate autogenous bone (control group) or ABBM of large, medium, and small size granules.

Bacterial adhesion and colonization differences between zirconia and titanium implant abutments: an in vivo human study.

Purpose: Several parameters have been described for determining the success or failure of dental implants. The surface properties of transgingival implant components have had a great impact on the long-term success of dental implants. The purpose of this study was to compare the tendency of two periodontal pathogens to adhere to and colonize zirconia abutments and titanium alloys both in hard surfaces and soft tissues.

Morphometric study of mandibular ramus related to sagittal ramus split osteotomy and osteosynthesis.

The objective of this study was to quantify the cortical bone thickness of the mandibular ramus to determine conditions related to sagittal split ramus osteotomy and placement of screws. The patient sample comprised 44 subjects of ages ranging from 46 to 52 years (mean age, 49 years). The cone-beam computed tomography was performed and realized 3 cuts in the third molar area (section A), 5 mm posterior (section B), and 5 mm posterior to the latter (section C).

Pattern and treatment of facial trauma in pediatric and adolescent patients.

Pediatric maxillofacial trauma is a challenge for surgeons. There are no completely defined protocols, and sometimes, the initial management could be complex. The aim of this research was to perform a retrospective study to analyze the pattern and treatment of maxillofacial fractures in pediatric and adolescent patients.

Mineralized tissue formation associated with 2 different dental implant designs: histomorphometric analyses performed in dogs.

The clinical success of dental implants might be associated with such factors as installation technique, implant shape, size, material, and screw threads. Therefore, the aim of this study is to analyze mineralized tissue formation on the screw threads of conical and cylindrical dental implants. This study includes 7 beagle dogs that had the lower premolars extracted.

Inflammatory fibrous hyperplasia treated with a modified vestibuloplasty: a case report.

Aim: The purpose of this report is to present a case of surgical and prosthetic treatment of a woman with inflammatory fibrous hyperplasia (IFH) and her evaluation during a six month period.

Background: IFH is a benign pathology, prevalent in female patients, and principally associated with ill-fitting prosthetic devices in need of adjustment. It is common for patients to require surgical removal of the hyperplastic tissue and fabrication of a new prosthesis.