Numerical Study of the Plastic Zone at the Crack Front in Cylindrical Aluminum Specimens Subjected to Tensile Loads.

Cylindrical specimens are of great interest in analyzing mechanical elements' behavior and investigating phenomena with biaxial loads. It is necessary to identify the behavior of the crack front along the thickness to interpret these results, which are usually based on the hypothesis of a straight crack and the observation of the outer face of the crack front. Based on the work carried out on compact tension type specimens, this work proposes adapting this methodology to cylindrical specimens, adapting the previous finite element models.

A Novel Methodology to Obtain the Mechanical Properties of Membranes by Means of Dynamic Tests.

A new, non-destructive methodology is proposed in this work in order to determine the mechanical properties of membrane using vibro-acoustic tests. This procedure is based on the dynamic analysis of the behavior of the membrane. When the membrane is subjected to a sound excitation it responds by vibrating based on its modal characteristics and this modal parameter is directly related to its mechanical properties.

Advances in the Analysis of Properties Behaviour of Cement-Based Grouts with High Substitution of Cement with Blast Furnace Slags.

This article presents a study of the main properties (consistency, workability, leaching, unsoundness, and mechanical properties) of cement grouts prepared with cement replacement by blast furnace slag (GGBS). Mixtures have been analyzed in the absence of additives and reached high replacement percentages. As shown in the different tests presented, the observed evolution of the resistance and workability of the mixtures makes them very interesting for its application.

Study of the Suitability of Different Types of Slag and Its Influence on the Quality of Green Grouts Obtained by Partial Replacement of Cement.

This paper is part of a research line focused on the reduction of the use of cement in the industry. In this work, the study of work methodologies for the manufacture of green cementitious grout mixtures is studied. Grout is widely used in construction and it requires an important use of raw materials.