Bone regeneration by a bone substitute biomaterial containing hydroxyapatite, chitosan, xanthan and graphene oxide supplemented with conditioned medium from mesenchymal stem cells.

This study analyzed a recently developed bone substitute biomaterial made of chitosan-xanthanhydroxyapatite-graphene oxide (CXHAG). The CXHAG particles underwent in vitro structural and morphological characterization, and in vivo testing with or without osteogenic conditioned medium from mesenchymal stem cells. Aim: The aim of this study was to determine whether the CXHAG novel biomaterial, supplemented with conditioned medium from mesenchymal stem cells, could be useful for bone regeneration.

Effect of adding arginine at different concentrations to experimental orthodontic resins: an in vitro study.

The aim of this study was to assess the effect of adding arginine at different concentrations to commercial and experimental orthodontic resins on shear bond strength (SBS), as well as on the antimicrobial activity of arginine against S. mutans. Metal brackets were bonded onto the surface of 120 bovine incisors using Transbond, OrthoCem, and an experimental resin (ER), adding 0, 2.

Mandible development under gestational protein restriction: cellular and molecular mechanisms.

Insufficient evidence regarding how maternal undernutrition affects craniofacial bone development persists. With its unique focus on the impact of gestational protein restriction on calvaria and mandible osteogenesis, this study aims to fill, at least in part, this gap. Female mice were mated and randomized into NP (normal protein) or LP (low protein) groups.

Cellulose acetate scaffold coated with a hydroxyapatite/graphene oxide nanocomposite for application in tissue engineering.

The objective of this study was to synthesize and characterize porous Cellulose Acetate (CA) scaffolds using the electrospinning technique and functionalize the surface of the scaffolds obtained through the dip-coating method with a Hydroxyapatite (HA) nanocomposite and varying concentrations of graphene oxide (GO) for application in tissue engineering regeneration techniques. The scaffolds were divided into four distinct groups based on their composition: 1) CA scaffolds; 2) CAHAC scaffolds; 3) CAHAGOC 1.0% scaffolds; 4) CAHAGOC 1.

Evaluation of mechanical properties and morphology of miniscrews Ti6Al4V cold worked versus annealed in artificial bones.

Purpose: This study aimed to evaluate the influence of different manufacturing procedures (Eli annealed - hot work versus cold worked - cold work) of the raw material under mechanical properties and morphological characteristics of orthodontic miniscrews (MS).

Material And Methods: Thirty MS were randomly separated into 3 types (n=10) according to manufacturer and manufacturing process of the raw material: type A - SIN® annealed (control group); type B - Dentfix® annealed; and, type C - Dentfix® cold worked. MI were inserted in artificial bone blocks, through the manufacturer's specific manual key attached to the digital torquemeter stabilized via custom device.

Deflection of tandem archwire in a specific self-ligating metal bracket system: an in vitro study.

The aim of this study was to quantify the force exerted by tandem archwires in a specific system of passive self-ligating bracket. Forty-eight thermo-activated nickel-titanium orthodontic archwires were separated into four groups (n = 12): G1 - two .014" + .

Porphyrin-associated fluorescence spectroscopy (Photogen®) for the optical diagnosis of dental biofilm in orthodontic treatment: An observational clinical trial.

Objective: This study assessed the presence of dental biofilm with fluorescence spectroscopy associated with porphyrin (Photogen®) in users of orthodontic appliances.

Methods: This cross-sectional observational clinical trial included 21 patients with metallic orthodontic fixed appliances. The presence of biofilm was evaluated by fluorescence spectroscopy (Evince-MMÓptics.

Chitosan/Xanthan/Hydroxyapatite-graphene oxide porous scaffold associated with mesenchymal stem cells for dentin-pulp complex regeneration.

The aim of this paper was to synthesize and characterize polymeric scaffolds of Chitosan/Xanthan/Hydroxyapatite-Graphene Oxide nanocomposite associated with mesenchymal stem cells for regenerative dentistry application. The chitosan-xanthan gum (CX) complex was associated with Hydroxyapatite-Graphene Oxide (HA-GO) nanocomposite with different Graphene Oxides (GO) concentration (0.5 wt%; 1.

Effect of horizontal slot of maxillary canines' brackets with varying wire angulations - An in vitro study.

A new device was developed to enable the visualization and measurement of canine angulation while at the same time visualizing and measuring the force transmitted to adjacent teeth. This study aimed to evaluate the mesiodistal tilt angle of the upper canine brackets, the wire deflection, and its effects on adjacent teeth with five different slot designs of upper canines. Wires (0.

Chitosan/Xanthan membrane containing hydroxyapatite/Graphene oxide nanocomposite for guided bone regeneration.

Objective: To develop a chitosan-xanthan (CX) membrane associated with Hydroxyapatite (HA) and different concentrations of graphene oxide (GO).

Methodology: The CX complex was associated with the hydroxyapatite-graphene oxide (HAGO) nanocomposite in different concentrations. The experimental groups were:1) CX; 2) Chitosan-Xanthan/Hydroxyapatite (CXHA); 3) Chitosan-Xanthan/Hydroxyapatite-Graphene Oxide 0.

Comparison of the shear bond strength between metal brackets and Transbond™ XT, Filtek™ Z250 and Filtek™ Z350 before and after gastroesophageal reflux: An in vitro study.

Purpose: To evaluate in vitro the effect of gastroesophageal reflux, before and after bonding of metal brackets on composite resin surface.

Materials And Methods: Two hundred and ten resin discs were divided into 5 groups (n=42), according to the time and medium of storage: 24h, 7- and -30 days in artificial saliva (AS) and hydrochloric acid (HCL). Twelve samples from each group were submitted to surface roughness analysis (n=60).

Comparison of the friction forces delivered by different elastomeric patterns and metal ligature on conventional metal brackets with a NiTi arch wire versus a self-ligating system: An in vitro study.

Objectives: The aim of this study was to measure the frictional resistance of different types of ligatures used on conventional and self-ligating brackets.

Materials And Methods: Monoblock (conventional) and Portia (self-ligating) brackets were used and the archwire used was nickel-titanium. On conventional brackets the ligatures tested were the Elastomeric type and steel 0.

Comparison of the physico-chemical impact of chlorhexidine and silver nanoparticles on orthodontic appliances made with laser and silver solder: An in vitro study.

Objective: The aim of this study was to evaluate the physical-chemical changes in orthodontic devices made with laser and silver solder after immersion in different antiseptic solutions.

Methods: Wire/band assemblies were fabricated using different types of solders (silver and laser). The devices were immersed in different antimicrobial solutions (chlorhexidine - CHX 0.

Can text messages encourage flossing among orthodontic patients?

Objectives: To assess the extent to which text messages on WhatsApp play a role in patient awareness of the importance of proper oral hygiene and flossing on a daily basis and to test the null hypothesis that daily text messages do not influence the flossing habits of orthodontics patients.

Materials And Methods: Forty-four patients wearing fixed orthodontic appliances with a mean age of 14.3 years participated in the study.

Comparation of three methods for measuring the Edge Bevel Radius of rectangular orthodontic wires: An in-vitro study.

Objective: To establish a simplified method for measuring the edge bevel radius of 0.019×0.025-in steel rectangular orthodontic wires, achievable in the clinical environment, and to compare it with the photographic method.

Comparison of force delivery of thermally activated aesthetic and non-aesthetic Ni-Ti wires: An in-vitro study.

Objective: The present study aimed to compare the force of aesthetic wires and their non-aesthetic equivalents from two commercial brands at different displacement points, during the unloading phase at 36°C.

Materials And Methods: Forty samples (n=10) were assessed, which were presented in two groups of aesthetic wires and two groups of non-aesthetic wires from the brands GAC® (Dentsply GAC® International, NY, USA) and Aditek®(Cravinhos, SP, Brazil), with 0.016-inch gauge.

Surface free energy of enamel treated with sodium hexametaphosphate, calcium and phosphate.

Objective: This study evaluated the capacity of sodium hexametaphosphate (HMP) at different concentrations to alter the surface properties of dental enamel in order to increase calcium and phosphate adsorption.

Design: Bovine enamel blocks (4 mm × 4 mm, n = 144, 12/group) were divided: 0%; 0.25%; 0.

Remineralizing effect of a fluoridated gel containing sodium hexametaphosphate: An in vitro study.

Objectives: To evaluate in vitro the effect of neutral pH topical gels with reduced fluoride concentration (F), supplemented or not with sodium hexametaphosphate (HMP) on the remineralization of dental enamel, using a pH-cycling model. Materials and methods Bovine enamel blocks with caries-like lesions were randomly treated with five gels (n = 24/group): without F/HMP (Placebo); 4500 ppm F (4500F), 4500F plus 9% HMP (4500F + HMP); 9000 ppm F (9000F); and 12,300 ppm F (Acid gel). After pH-cycling, the percentage of surface hardness recovery (%SHR), integrated loss of subsurface hardness (ΔKHN), and concentrations of loosely- (CaF) and firmly-bound (FA) fluoride formed and retained in/on enamel were determined.

Radiographic analysis of factors predisposing toward tendon tears in the knee extensor mechanism.

Objectives: to review radiographs of patients who suffered tendon tears of the knee extensor apparatus and observe alterations that might be factors predisposing toward this type of injury.

Methods: we retrospectively analyzed 60 cases of injury to the knee extensor mechanism that were treated surgically at the Miguel Couto Municipal Hospital between March 2004 and March 2011. Four patients were excluded due to poor quality of the examination.