Which materials would account for a better mechanical behavior for direct endocrown restorations?

Purpose: To investigate the mechanical performance and fracture behavior of endocrown restorations prepared using different composite materials and following a direct technique.

Methods: Sound molars were cut at 2 mm above the cementoenamel junction, endodontically treated, and allocated according to the type of restoration (n = 7): without post (endocrowns) or with post (post-retained restorations). Endocrowns were fabricated with conventional composite (Filtek Z350); bulk fill composite (Filtek Bulk Fill); conventional composite modeled using resin adhesives (SBMP: Scotchbond Multipurpose Adhesive; or SBU: Scotchbond Universal Adhesive); and lithium disilicate ceramic (E.

New material perspective for endocrown restorations: effects on mechanical performance and fracture behavior.

The aim of this study was to investigate the mechanical performance and the fracture behavior of endocrown restorations prepared using distinct restorative materials. A total of 42 sound molars with similar crown size and shape were cut at 2 mm above the cementoenamel junction and endodontically treated. They were categorized according to the restorative material used to fabricate endocrown restorations (n=7), namely, conventional composite (Filtek™ Z350 XT), bulk fill composite (Filtek™ Bulk Fill), conventional composite modeled using resin adhesives (SBMP: Scotchbond™ Multipurpose Adhesive; or SBU: Scotchbond™ Universal Adhesive), and IPS e.

Translucency and color stability of resin composite and dental adhesives as modeling liquids - A one-year evaluation.

The aim of this study is to evaluate the influence of modeling liquids on the translucency and color shade of resin composites (RCs) after one year of storage. RC specimens were prepared using either a conventional insertion technique (control; without modeling liquid) or a restorative dental modeling insertion technique (RDMIT) with dental adhesives as modeling liquids (Scotchbond™ Multi-Purpose [SBMP; 3M ESPE] or Adper™ Single Bond 2 [SB; 3M ESPE]). The initial colors of the specimens were obtained with a digital spectrophotometer and the CIEL*a*b* color system, after which specimens were stored (37°C) in distilled water or red wine for 12 months.

Effects of modeling liquid/resin and polishing on the color change of resin composite.

Modeling liquids/resins have been used to build up resin composite (RC) restorations, although there is a lack of information regarding their effects on the color stability of the latter. Therefore, the purpose of the present study was to evaluate the effects of the presence of modeling liquid between layers of RC and the finishing/polishing state of the material on color change in specimens exposed to red wine staining over time. Specimens were prepared by placing four increments (±0.

Endocrown restorations: A systematic review and meta-analysis.

Objectives: A systematic review was conducted to evaluate clinical (survival) and in vitro (fracture strength) studies of endocrown restorations compared to conventional treatments (intraradicular posts, direct composite resin, inlay/onlay).

Data: This report followed the PRISMA Statement. A total of 8 studies were included in this review.

Use of dental adhesives as modeler liquid of resin composites.

Objectives: Resin adhesives (RA) have been applied between resin composite (RC) increments, but there is no consensus on the impact of this technique on the properties of the final restoration. This study evaluated the effect of the presence of RA between RC layers on physical properties, translucency and long-term color stability of the restorative material.

Methods: Scotchbond™ Multi-Purpose (bond, 3M ESPE) and Adper™ Single Bond 2 (3M ESPE) were used as RA, and Filtek™ Z350 (3M ESPE) as RC.

Impairment of resin cement application on the bond strength of indirect composite restorations.

The aims of this study were to evaluate the effect of immediate and delayed resin cement application on the microtensile bond strength of indirect composite resin restorations and, to evaluate adhesive strategies (for regular resin cement or humidity parameters for self-adhesive resin cement). Forty-five enamel/dentin discs (0.5 mm height and 10 mm of diameter) obtained from bovine teeth were divided into nine groups (n = 5).

Should occlusal splints be a routine prescription for diagnosed bruxers undergoing implant therapy?

Despite the documented excellent clinical performance of dental implants, concerns linger regarding the best way to protect the restored dentition in patients with bruxism. This is because of the risk of occlusal overload that is reported to cause biological and biomechanical failures in the implant-prosthesis system. To better distribute occlusal loads to the rigid components of the prosthesis and to the interface between bone and implant during parafunctional movements, several dentists prescribe acrylic resin occlusal splints for nocturnal use by patients considered at risk.