Carbon nanotubes-assisted solid-phase microextraction for the extraction of gasoline in fire debris samples.

Gasoline is one of the most encountered ignitable liquids (IL) in fire debris analysis. The extraction of gasoline from fire debris samples presents challenges due to the complicated nature of multicomponent mixtures. This research work proposed a novel carbon nanotube-assisted solid phase microextraction (CNT-SPME) fiber coupled with gas chromatography and mass spectrometry (GC/MS) to determine gasoline residues for fire debris analysis.

Determination of morphine, codeine, and thebaine concentrations from poppy seed tea using magnetic carbon nanotubes facilitated dispersive micro-solid phase extraction and GC-MS analysis.

With tightening enforcement and restrictions amid the opioid epidemic, poppy seed tea is consumed as an alternative to mitigate the withdrawal symptoms or as a home remedy to relieve pain and stress. Previously published studies suggested the potential danger of consuming tea brewed with a moderate to a large amount of poppy seed. In this study, the effects of small quantity and repeat brewing on opiate concentrations were evaluated.

Development of Crime Scene Intelligence Using a Hand-Held Raman Spectrometer and Transfer Learning.

The classification of ignitable liquids, such as gasoline, is critical crime scene intelligence to assist arson investigations. Rapid field gasoline classification is challenging because the current forensic testing standard requires gas chromatography-mass spectrometry analysis of evidence in an accredited laboratory. In this work, we reported a new intelligent analytical platform for field identification and classification of gasoline evidence.

Development of magnetic carbon nanotubes for dispersive micro solid phase extraction of the cyanide metabolite, 2-aminothiazoline-4-carboxylic acid, in biological samples.

2-aminothiazoline-4-carboxylic acid (ATCA) is a minor metabolite of cyanide and is suggested to be a promising biomarker for cyanide exposure due to its specificity to cyanide metabolism and its excellent short- and long-term stability during storage. In this study, magnetic carbon nanotubes, including magnetic multi-walled carbon nanotubes (Mag-MWCNT) and magnetic single-walled carbon nanotubes (Mag-SWCNT) were synthesized as a novel sorbent for dispersive micro solid phase extraction (d-μSPE) to extract ATCA from biological matrices. ATCA spiked deionized water samples with the addition of the isotopic internal standard (ATCA - C, N) were subjected to Mag-CNT/d-μSPE to confirm extraction efficiency of this new technique.

A Lipid Base Formulation for Intramuscular Administration of a Novel Sulfur Donor for Cyanide Antagonism.

This study represents a new formulation of the novel Cyanide (CN) antidote, Dimethyl trisulfide (DMTS), for intramuscular administration. This is a naturally occurring organosulfur molecule with the capability of reacting with CN more efficiently than the present sulfur donor type CN therapy of Thiosulfate (TS). Two types of micelles (PEG2000-DSPE and PEG2000-DSPE/TPGS) were prepared and tested for their ability to encapsulate the liquid, highly lipophilic and volatile drug, DMTS.

Analysis of ethyl and methyl centralite vibrational spectra for mapping organic gunshot residues.

Detection of ethyl and methyl centralites in gunshot residues is important in forensic science due to their limited contamination from environmental sources compared to other organic residues. However, the vibrational frequencies of centralites are little explored and their frequency assignments are incomplete. Herein, we investigated vibrational frequencies of centralites based on Density functional theory (DFT) to understand their vibrations.

The use of near-infrared photography to image fired bullets and cartridge cases.

An imaging technique that is capable of reducing glare, reflection, and shadows can greatly assist the process of toolmarks comparison. In this work, a camera with near-infrared (near-IR) photographic capabilities was fitted with an IR filter, mounted to a stereomicroscope, and used to capture images of toolmarks on fired bullets and cartridge cases. Fluorescent, white light-emitting diode (LED), and halogen light sources were compared for use with the camera.

Pyrolysis products of linear alkylbenzenes--implications in fire debris analysis.

In this case report, potential interferences from an improvised fire-extinguishing agent, a dishwashing liquid, containing linear alkylbenzene sulfonates (LAS), was studied. The presence of linear alkylbenzenes (LABs) in the fire debris sample was identified from the summed ion profile (SIP) analysis. It was found that the LAS from dishwashing liquids produce LABs by thermal degradation.

Plasma persistence of 2-aminothiazoline-4-carboxylic acid in rat system determined by liquid chromatography tandem mass spectrometry.

2-Aminothiazoline-4-carboxylic acid (ATCA) was intravenously injected to rats in order to investigate its plasma distribution. ATCA was extracted from plasma samples by solid phase extraction (SPE) and molecularly imprinted polymer stir bar sorption extraction (MIP-SBSE). Detection and quantification of ATCA were achieved by using liquid chromatography-tandem mass spectrometry (LC-MS/MS).

Nano-intercalated organophosphorus-hydrolyzing enzymes in organophosphorus antagonism.

A dendritic poly(2-alkyloxazoline)-based polymer was studied as a new carrier system for the organophosphorus-hydrolyzing recombinant enzymes, organophosphorus acid anhydrolase and organophosphorus hydrolase. Paraoxon (PO) and diisopropylfluorophosphate (DFP) were used as model organophosphorus compounds. Changes in plasma cholinesterase activity were monitored.

Organ-distribution of the metabolite 2-aminothiazoline-4-carboxylic acid in a rat model following cyanide exposure.

The reaction of cyanide (CN(-)) with cystine to produce 2-aminothiazoline-4-carboxylic acid (ATCA) is one of the independent detoxification pathways of cyanide in biological systems. In this report, in vivo production of ATCA and its distributions in plasma and organs were studied after a subcutaneous sublethal dose of 4 mg/kg body weight potassium cyanide (KCN) administration to rats. At this sublethal dose of KCN, ATCA concentration was not significantly increased in the plasma samples, however, it was found significantly increased in liver samples.

Molecularly imprinted polymers for ochratoxin a extraction and analysis.

Molecularly imprinted polymers (MIPs) are considered as polymeric materials that mimic the functionality of antibodies. MIPs have been utilized for a wide variety of applications in chromatography, solid phase extraction, immunoassays, and sensor recognition. In this article, recent advances of MIPs for the extraction and analysis of ochratoxins are discussed.

Forensic analysis of a single particle of partially burnt gunpowder by solid phase micro-extraction-gas chromatography-nitrogen phosphorus detector.

Solid phase micro-extraction (SPME) was adopted to extract organic gun shot residues (OGSRs) from a single particle of partially burnt gunpowder. The partially burnt particle samples were collected from gun shot residue (GSR) deposited near the target areas. OGSRs, such as diphenylamine (DPA), methyl centralite (MC), ethyl centralite (EC), from only one single particle of partially burnt gunpowder were successfully extracted by SPME and analyzed by a gas chromatography coupled to a nitrogen phosphorus detector (GC-NPD).

Molecularly imprinted polypyrrole encapsulated carbon nanotubes in stainless steel frit for micro solid phase extraction of estrogenic compounds.

A novel micro-solid phase extraction (microSPE) device was prepared by electrochemically adhering molecularly imprinted polypyrrole encapsulated carbon nanotubes (MIPPy/CNTs) onto a stainless steel frit. It was found that the use of CNTs increased the total binding capacity without compromising the porosity of the frit. Three templates, 17alpha-ethynyl estradiol (EE2), 17beta-estradiol (E2), and ochratoxin A (OTA) were imprinted individually to make their respective MIPPy/CNTs-modified frits.

Molecularly-imprinted polypyrrole-modified stainless steel frits for selective solid phase preconcentration of ochratoxin A.

A molecularly-imprinted polymer (MIP) was prepared by electropolymerization of pyrrole (Py) onto a stainless steel frit, using ochratoxin A (OTA) as the template, in order to make a micro solid phase preconcentration (microSPP) device. The OTA template was removed with 1% triethylamine (TEA) in methanol. Compared to non-imprinted polypyrrole (PPy), the molecularly-imprinted polypyrrole (MIPPy) enhanced the selective binding of OTA.

Polypyrrole modified stainless steel frits for on-line micro solid phase extraction of ochratoxin A.

Polypyrrole (PPy) was electrochemically synthesized on stainless steel frits as a sorbent for the micro solid phase extraction (muSPE) of ochratoxin A (OTA). Using 20 microl of standard solution under a fast flow rate of 0.5 ml/min, 80% recovery of OTA was achieved in the concentration range from 0.