Color translation from monoscopic photogrammetry +ID Methodology into a Polyjet final 3D printed facial prosthesis.

The artistic techniques necessary to fabricate facial prostheses mainly depend on individual skill and are not a resource easily reproduced. Digital technology has contributed to improved outcomes, often combining analog and new digital techniques in the same workflow. This article aims to present an innovative workflow to produce a final colored 3D printed and facial prosthesis by UV-map color translation into colored resin 3D printing.

Silver nanoparticle incorporation into flexible polyamide 12 membranes.

To meet the demands of the market and society, the development of structured polymeric materials for application in the medical field is constantly increasing. Over the last decades, metallic silver nanoparticles have been explored due to their antimicrobial action. Here, we aimed to incorporate metallic silver nanoparticles into polymeric pieces obtained by additive manufacture via a chemical route involving silver nitrate and sodium borohydride.

Accuracy Evaluation of the Computer-Designed Selective Laser Sintering Surgical Guide for Flapless Immediate Loading Dental Implants Surgery in Edentulous Jaws.

This study was designed to evaluate the accuracy of a novel computer-designed and selectively laser sintered surgical guide for flapless dental implant placement in the edentulous jaw. Fifty dental implants were placed in 11 patients with at least 1 totally edentulous jaw. Initially, cone-beam computed tomography (CBCT) was performed in each patient to define the virtual position of the dental implants based on the assessment of bone availability and the proposed dental prosthesis.

3D-printed nerve guidance conduits multi-functionalized with canine multipotent mesenchymal stromal cells promote neuroregeneration after sciatic nerve injury in rats.

Background: Nerve injuries are debilitating, leading to long-term motor deficits. Remyelination and axonal growth are supported and enhanced by growth factor and cytokines. Combination of nerve guidance conduits (NGCs) with adipose-tissue-derived multipotent mesenchymal stromal cells (AdMSCs) has been performing promising strategy for nerve regeneration.

Advances in Bone tissue engineering: A fundamental review.

Bone is a dynamic tissue that can always rebuild itself by modeling and remodeling to maintain functionality. This tissue is responsible for several vital functions in the body, such as providing structural support for soft tissues and the body, being the central region of hematopoiesis in human adults, and contributing to mineral homeostasis. Besides, it has an innate ability of auto-regeneration when damaged.

The role of 3D printing during COVID-19 pandemic: a review.

The coronavirus disease 2019 (COVID-19) pandemic, caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), has spread through more than 180 countries, leading to diverse health systems overload around the world. Because of the high number of patients and the supply chain disruption, it generated a shortage of medical devices and personal protective equipment. In this context, initiatives from the additive manufacturing community emerged to fight the lack of devices.

Functional and aesthetic evaluation after cranial reconstruction with polymethyl methacrylate prostheses using low-cost 3D printing templates in patients with cranial defects secondary to decompressive craniectomies: A prospective study.

Background: Cranial reconstruction surgery is a procedure used as an attempt to reestablish the cranial bone anatomy. This study evaluates the symptomatic and aesthetic improvement of patients with cranial defects secondary to decompressive craniectomies after cranial reconstruction with customized polymethyl methacrylate (PMMA) prostheses. Secondly, we aim to divide our experience in the production of these prostheses with a low-cost method.

Three-dimensional printing and in vitro evaluation of poly(3-hydroxybutyrate) scaffolds functionalized with osteogenic growth peptide for tissue engineering.

Poly(3-hydroxybutyrate) (PHB) is a biodegradable and thermoprocessable biopolymer, making it a promising candidate for applications in tissue engineering. In the present study a structural characterization and in vitro evaluation were performed on PHB scaffolds produced by additive manufacturing via selective laser sintering (SLS), followed by post-printing functionalization with osteogenic growth peptide (OGP) and its C-terminal sequence OGP(10-14). The PHB scaffolds were characterized, including their morphology, porosity, thermal and mechanical properties, moreover OGP release.

Finite Element Evaluation of Stable Fixation in Combined Mandibular Fractures.

Purpose: The fixation of combined mandibular fractures, especially symphyseal-condylar fractures, although occurring commonly and having a higher complication rate in the clinic, is rarely investigated regarding predictable therapeutic approaches. Thus this study's aim was to assess different forms of condylar fixation when combined with symphyseal fracture fixation.

Materials And Methods: Using finite element models, we analyzed the stress distribution that occurs when a condylar fracture is fixed with 1 miniplate, 2 miniplates, or a trapezoidal condylar miniplate and when a symphyseal fracture is fixed with 2 parallel plates, 2 perpendicular plates, or 2 lag screws.

Comparison Among Manual Facial Approximations Conducted by Two Methodological Approaches of Face Prediction.

This study verified the difference between two methods of forensic facial approximation (FFA) regarding recognition and resemblance rates. Three-dimensional models of skulls were obtained from computerized tomography (CT) scans of two subjects (targets). Two manual FFAs were performed for each target, by applying two different guidelines for the facial structures (what we called "American method" (AM) and "Combined method" (CM)).

Perturbation Measurements on the Degree of Naturalness of Synthesized Vowels.

Objective: To determine the impact of jitter and shimmer on the degree of naturalness perception of synthesized vowels produced by acoustical simulation with glottal pulses (GP) and with solid model of the vocal tract (SMVT).

Study Design: Prospective study.

Methods: Synthesized vowels were produced in three steps: 1.

Bridging Plate Development for Treatment of Segmental Bone Defects of the Canine Mandible: Mechanical Tests and Finite Element Method.

With regard to the canine mandible, a mistaken concept of application is to assume that systemic plate-bone resistance is provided by the implant so that biomechanical position could be ignored. Because the alveolar border of the mandible is a tensile zone, the plate would ideally be positioned near this area while avoiding important structures. The aim of this study was to develop 2 bridging plates for the treatment of a segmental bone defect of the canine mandible using monocortical screws to avoid damage to the tooth roots and remaining neurovascular structures.

Forensic facial approximation assessment: can application of different average facial tissue depth data facilitate recognition and establish acceptable level of resemblance?

Facial soft tissue thicknesses (FSTT) are important guidelines for modeling faces from skull. Amid so many FSTT data, Forensic artists have to make a subjective choice of a dataset that best meets their needs. This study investigated the performance of four FSTT datasets in the recognition and resemblance of Brazilian living individuals and the performance of assessors in recognizing people, according to sex and knowledge on Human Anatomy and Forensic Dentistry.

Monoscopic photogrammetry to obtain 3D models by a mobile device: a method for making facial prostheses.

Purpose: The aim of this study is to present the development of a new technique to obtain 3D models using photogrammetry by a mobile device and free software, as a method for making digital facial impressions of patients with maxillofacial defects for the final purpose of 3D printing of facial prostheses.

Methods: With the use of a mobile device, free software and a photo capture protocol, 2D captures of the anatomy of a patient with a facial defect were transformed into a 3D model. The resultant digital models were evaluated for visual and technical integrity.

3-D simulation of posterior fossa reduction in Chiari I.

We proposed a 3D model to evaluate the role of platybasia and clivus length in the development of Chiari I (CI). Using a computer aided design software, two DICOM files of a normal CT scan and MR were used to simulate different clivus lengths (CL) and also different basal angles (BA). The final posterior fossa volume (PFV) was obtained for each variation and the percentage of the volumetric change was acquired with the same method.

3D-printed PCL scaffolds for the cultivation of mesenchymal stem cells.

Introduction: Tissue engineering is a field which is currently under a great deal of investigation for the development and/or restoration of tissue and organs, through the combination of cell therapy with biomaterials. Rapid prototyping or additive manufacturing is a versatile technology which makes possible the fabrication of three dimensional (3D) structures from a wide range of materials with complex geometry and accuracy, such as scaffolds.

Aim: The aim of this study has been to investigate the interaction between mesenchymal stem cells with poly (ε-caprolactone) (PCL) biomaterials used for obtaining scaffolds through additive manufacturing.

Analysis of Mandibular Test Specimens Used to Assess a Bone Fixation System.

The aim of this study was to assess through biomechanical testing if different synthetic materials used to fabricate test specimens have a different biomechanical behavior in comparison with other materials when simulating in vitro load resistance of a fixation method established for sagittal split ramus osteotomy (SSRO). Thirty synthetic and standardized human hemimandible replicas with SSRO were divided into three groups of 10 samples each. Group A-ABS plastic; Group B-polyamide; and Group C-polyurethane.

Assessment of orbital volume in frontofacial advancements.

Objectives: The objective of this study was to evaluate the variation of the orbital volume and the correlation with the magnitude of craniofacial advances as well as demonstrate its effectiveness through comparisons with normal levels of orbital volumes.

Introduction: Syndromic craniofacial synostosis is characterized by cranial morphological alterations and hypoplasia of the midface that may result in obstructive sleep apnea and exorbitism; these effects are indications of surgical treatment. The gradual advancement of tissues is the surgical treatment to correct accentuated exorbitisms and jaw retrusions.

Comparison of Neck Screw and Conventional Fixation Techniques in Mandibular Condyle Fractures Using 3-Dimensional Finite Element Analysis.

Purpose: To compare the mechanical stress on the mandibular condyle after the reduction and fixation of mandibular condylar fractures using the neck screw and 2 other conventional techniques according to 3-dimensional finite element analysis.

Materials And Methods: A 3-dimensional finite element model of a mandible was created and graphically simulated on a computer screen. The model was fixed with 3 different techniques: a 2.

A novel method for intraoral access to the superior head of the human lateral pterygoid muscle.

Background: The uncoordinated activity of the superior and inferior parts of the lateral pterygoid muscle (LPM) has been suggested to be one of the causes of temporomandibular joint (TMJ) disc displacement. A therapy for this muscle disorder is the injection of botulinum toxin (BTX), of the LPM. However, there is a potential risk of side effects with the injection guide methods currently available.

Is characterizing the digital forensic facial reconstruction with hair necessary? A familiar assessors' analysis.

Background: In the international scientific literature, there are few studies that emphasize the presence or absence of hair in forensic facial reconstructions. There are neither Brazilian studies concerning digital facial reconstructions without hair, nor research comparing recognition tests between digital facial reconstructions with hair and without hair. The miscegenation of Brazilian people is considerable.

Scaffold informatics and biomimetic design: three-dimensional medical reconstruction.

This chapter briefly describes the concepts underlying medical imaging reconstruction and the requirements for its integration with subsequent applications as BioCAD, rapid prototyping (RP), and rapid manufacturing (RM) of implants, scaffolds, or organs. As an introduction to the problem, principles related to data acquisition, enhancement, segmentation, and interpolation are discussed. After this, some available three-dimensional medical reconstruction software tools are presented.

Touchless gesture user interface for interactive image visualization in urological surgery.

Purpose: In the operating room (OR) a touchless interface is an ideal solution since it does not demand any physical contact and still can provide the necessary control features in a cleansed and sterilized environment.

Methods: Using open-source software libraries and image processing techniques, we implemented a hand tracking and gesture recognition system based on the Kinect device that enables surgeon to successfully touchlessly navigate through the image in the intraoperative setting through a personal computer. We used the InVesalius software, which provides high-quality 3D reconstruction of medical images.

Tests of one Brazilian facial reconstruction method using three soft tissue depth sets and familiar assessors.

Facial reconstruction is a method that seeks to recreate a person's facial appearance from his/her skull. This technique can be the last resource used in a forensic investigation, when identification techniques such as DNA analysis, dental records, fingerprints and radiographic comparison cannot be used to identify a body or skeletal remains. To perform facial reconstruction, the data of facial soft tissue thickness are necessary.