Highly Sensitive and Selective Gas Sensors Based on Metal Iodates: Material Characterization and Sensor Performance Evaluation.

This study proposes the possibility of employing metal iodates as novel gas-sensing materials synthesized using a facile chemical precipitation method. An extensive survey of a library of metal iodates reveals that cobalt, nickel, and copper iodates are useful for gas sensor applications. Material analysis conducted using scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, thermal gravity differential temperature analysis, and Raman spectroscopy enables us to understand the thermal behavior and optimize post-annealing conditions.

Development of Morphologically engineered Flower-like Hafnium-Doped ZnO with Experimental and DFT Validation for Low-Temperature and Ultrasensitive Detection of NO Gas.

Substitutional doping and different nanostructures of ZnO have rendered it an effective sensor for the detection of volatile organic compounds in real-time atmosphere. However, the low selectivity of ZnO sensors limits their applications. Herein, hafnium (Hf)-doped ZnO (Hf-ZnO) nanostructures are developed by the hydrothermal method for high selectivity of hazardous NO gas in the atmosphere, substantially portraying the role of doping concentration on the enhancement of structural, optical, and sensing behavior.

Monolayer Co3 O4 Inverse Opals as Multifunctional Sensors for Volatile Organic Compounds.

Monolayers of periodic porous Co3 O4 inverse opal (IO) thin films for gas-sensor applications were prepared by transferring cobalt-solution-dipped polystyrene (PS) monolayers onto sensor substrates and subsequent removal of the PS template by heat treatment. Monolayer Co3 O4 IO thin films having periodic pores (d≈500 nm) showed a high response of 112.9 to 5 ppm C2 H5 OH at 200 °C with low cross-responses to other interfering gases.

Electrical graphene aptasensor for ultra-sensitive detection of anthrax toxin with amplified signal transduction.

Detection of the anthrax toxin, the protective antigen (PA), at the attomolar (aM) level is demonstrated by an electrical aptamer sensor based on a chemically derived graphene field-effect transistor (FET) platform. Higher affinity of the aptamer probes to PA in the aptamer-immobilized FET enables significant improvements in the limit of detection (LOD), dynamic range, and sensitivity compared to the antibody-immobilized FET. Transduction signal enhancement in the aptamer FET due to an increase in captured PA molecules results in a larger 30 mV/decade shift in the charge neutrality point (Vg,min ) as a sensitivity parameter, with the dynamic range of the PA concentration between 12 aM (LOD) and 120 fM.

Reduced graphene oxide field-effect transistor for label-free femtomolar protein detection.

We report reduced graphene oxide field effect transistor (R-GO FET) biosensor for label-free ultrasensitive detection of a prostate cancer biomarker, prostate specific antigen/α1-antichymotrypsin (PSA-ACT) complex. The R-GO channel in the device was formed by reduction of graphene oxide nanosheets networked by a self-assembly process. Immunoreaction of PSA-ACT complexes with PSA monoclonal antibodies on the R-GO channel surface caused a linear response in the shift of the gate voltage, V(g,min), where the minimum conductivity occurs.

Kinetic mechanism of fuculose-1-phosphate aldolase from the hyperthermophilic archaeon Methanococcus jannaschii.

Fuculose-1-phosphate aldolase (FucA) is a useful biocatalyst with potential applications in chiral synthesis. In this study, the overall kinetic mechanism of FucA from the archaeon Methanococcus jannaschii was studied. The K(m) values of dihydroxyacetone phosphate (DHAP) and dl-glyceraldehyde were 0.

Characterization of acetohydroxyacid synthase I from Escherichia coli K-12 and identification of its inhibitors.

The first step in branched-chain amino acid biosynthesis is catalyzed by acetohydroxyacid synthase (EC 2.2.1.

Organic electrochemical transistor based immunosensor for prostate specific antigen (PSA) detection using gold nanoparticles for signal amplification.

We demonstrated a highly sensitive organic electrochemical transistor (OECT) based immunosensor with a low detection limit for prostate specific antigen/alpha1-antichymotrypsin (PSA-ACT) complex. The poly(styrenesulfonate) doped poly(3,4-ethylenedioxythiophene) (PEDOT:PSS) based OECT with secondary antibody conjugated gold nanoparticles (AuNPs) provided a detection limit of the PSA-ACT complex as low as 1pg/ml, as well as improved sensitivity and a dynamic range, due to the role of AuNPs in the signal amplification. The sensor performances were particularly improved in the lower concentration range where the detection is clinically important for the preoperative diagnosis and screening of prostate cancer.

Resonant germanium nanoantenna photodetectors.

On-chip optical interconnection is considered as a substitute for conventional electrical interconnects as microelectronic circuitry continues to shrink in size. Central to this effort is the development of ultracompact, silicon-compatible, and functional optoelectronic devices. Photodetectors play a key role as interfaces between photonics and electronics but are plagued by a fundamental efficiency-speed trade-off.

Engineering light absorption in semiconductor nanowire devices.

The use of quantum and photon confinement has enabled a true revolution in the development of high-performance semiconductor materials and devices. Harnessing these powerful physical effects relies on an ability to design and fashion structures at length scales comparable to the wavelength of electrons (approximately 1 nm) or photons (approximately 1 microm). Unfortunately, many practical optoelectronic devices exhibit intermediate sizes where resonant enhancement effects seem to be insignificant.

Determination of trace amounts of lead and cadmium using a bismuth/glassy carbon composite electrode.

We examined the use of a bismuth-glassy carbon (Bi/C) composite electrode for the determination of trace amounts of lead and cadmium. Incorporated bismuth powder in the composite electrode was electrochemically dissolved in 0.1M acetate buffer (pH 4.

Determination of trace metals by anodic stripping voltammetry using a bismuth-modified carbon nanotube electrode.

A bismuth-modified carbon nanotube electrode (Bi-CNT electrode) was employed for the determination of trace lead, cadmium and zinc. Bismuth film was prepared by in situ plating of bismuth onto the screen-printed CNT electrode. Operational parameters such as preconcentration potential, bismuth concentration, preconcentration time and rotation speed during preconcentration were optimized for the purpose of determining trace metals in 0.

The effects of anthrax lethal factor on the macrophage proteome: potential activity on nitric oxide synthases.

Anthrax lethal factor (LeTx) is a critical virulence factor in toxin-challenged cells, as lethal factor (LF) cleaves mitogen-activated protein kinase kinases (MKKs), inhibiting their activity. The physiological importance of this cleavage for macrophage cytolysis remains unclear, because similar proteolysis has been also observed in LeTx-resistant macrophages. Here, we analyzed in vitro proteomic profiles of Raw264.

Electrical properties of polyaniline and multi-walled carbon nanotube hybrid fibers.

We have fabricated for the first time one-dimensional multiwalled carbon nanotube (MWNT) nanocomposite fibers with improved electrical properties using electrospinning. Polyaniline (PANi) and poly(ethylene oxide) (PEO) were used as a conducting and a nonconducting matrix, respectively, for hybrid nanofibers including MWNTs. The hybrid nanofibers fabricated by electrospinning had a length of several centimeters and a diameter ranging from approximately 100 nm to approximately 1 microm.