Microbial Nanocellulose Printed Circuit Boards for Medical Sensing.

We demonstrate the viability of using ultra-thin sheets of microbially grown nanocellulose to build functional medical sensors. Microbially grown nanocellulose is an interesting alternative to plastics, as it is hydrophilic, biocompatible, porous, and hydrogen bonding, thereby allowing the potential development of new application routes. Exploiting the distinguishing properties of this material enables us to develop solution-based processes to create nanocellulose printed circuit boards, allowing a variety of electronics to be mounted onto our nanocellulose.

A Fully-Flexible Solution-Processed Autonomous Glucose Indicator.

We present the first demonstration of a fully-flexible, self-powered glucose indicator system that synergizes two flexible electronic technologies: a flexible self-powering unit in the form of a biofuel cell, with a flexible electronic device - a circuit-board decal fabricated with biocompatible microbial nanocellulose. Our proof-of-concept device, comprising an enzymatic glucose fuel cell, glucose sensor and a LED indicator, does not require additional electronic equipment for detection or verification; and the entire structure collapses into a microns-thin, self-adhering, single-centimeter-square decal, weighing less than 40 mg. The flexible glucose indicator system continuously operates a light emitting diode (LED) through a capacitive charge/discharge cycle, which is directly correlated to the glucose concentration.

Electrolyte-Sensing Transistor Decals Enabled by Ultrathin Microbial Nanocellulose.

We report an ultra-thin electronic decal that can simultaneously collect, transmit and interrogate a bio-fluid. The described technology effectively integrates a thin-film organic electrochemical transistor (sensing component) with an ultrathin microbial nanocellulose wicking membrane (sample handling component). As far as we are aware, OECTs have not been integrated in thin, permeable membrane substrates for epidermal electronics.

Ambient method for the production of an ionically gated carbon nanotube common cathode in tandem organic solar cells.

A method of fabricating organic photovoltaic (OPV) tandems that requires no vacuum processing is presented. These devices are comprised of two solution-processed polymeric cells connected in parallel by a transparent carbon nanotubes (CNT) interlayer. This structure includes improvements in fabrication techniques for tandem OPV devices.

N-alkyldinaphthocarbazoles, azaheptacenes, for solution-processed organic field-effect transistors.

Substituted N-alkyldinaphthocarbazoles were synthesized using a key double Diels-Alder reaction. The angular nature of the dinaphthocarbazole system allows for increased stability of the conjugated system relative to linear analogues. The N-alkyldinaphthocarbazoles were characterized by UV-vis absorption and fluorescence spectroscopy as well as cyclic voltammetry.

High-hole-mobility field-effect transistors based on co-benzobisthiadiazole-quaterthiophene.

High-mobility organic thin film transistors based on a benzobisthiadiazole-containing polymer are presented together with their morphological and optical properties. A very tight packing pattern of "edge-on" orientated polymer chains is observed in their thin films after annealing, and the hole mobility of this polymer is up to 2.5 cm(2) V(-1) s(-1) .

High-performance ambipolar transistors and inverters from an ultralow bandgap polymer.

High mobility ambipolor organic thin-film transistors based on an ultralow bandgap polymer are presented together with their morphological and optical properties. Hole and electron mobilities of this polymer are of 1.0 cm(2) V(-1) s(-1) and 0.

Control of efficiency, brightness, and recombination zone in light-emitting field effect transistors.

The split-gate light emitting field effect transistors (SG-LEFETs) demonstrate a new strategy for ambipolar LEFETs to achieve high brightness and efficiency simultaneously. The SG architecture forces largest quantity of opposite charges on Gate 1 and Gate 2 area to meet in the center of the channel. By actively and independently controlling current injection from separated gate electrodes within transporting channel, high brightness can be obtained in the largest injection current regime with highest efficiency.

Observations of PDDTT subject to thermal treatment: correlation between performance and order.

We show that polybis(thienyl)thienodia-thiazolethiophene (PDDTT), a high-performance semiconducting polymer for photodetectors and field-effect transistors, has strong performance dependence on annealing temperature. An unprecedented increase of 3 orders of magnitude is observed in both transistor and photoconductive properties. XRD and AFM evidence points to increased ordering in PDDTT films with annealing.

High performance weak donor-acceptor polymers in thin film transistors: effect of the acceptor on electronic properties, ambipolar conductivity, mobility, and thermal stability.

We have studied the electronic, physical, and transistor properties of a family of donor-acceptor polymers consisting of diketopyrrolopyrrole (DPP) coupled with different accepting companion units in order to determine the effects of donor-acceptor interaction. Using the electronically neutral benzene (B), the weakly accepting benzothiadiazole (BT), and the strongly accepting benzobisthiadiazole (BBT), the accepting strength of the companion unit was systematically modulated. All polymers exhibited excellent transistor performance, with mobilities above 0.

Ambipolarity in benzobisthiadiazole-based donor-acceptor conjugated polymers.

A family of four new DA polymers, in which the acceptor moiety benzobisthiadiazole was paired with four different donor moieties, has been synthesized. Surpri-singly, all members of the family exhibit balanced ambipolar behavior, despite polymer to polymer mobilities varying from 10(-4) cm(2) V(-1) s(-1) to 10(-1) cm(2) V(-1) s(-1). Applications in single component CMOS integrated circuits are envisioned.

Colorimetric detection of DNA, small molecules, proteins, and ions using unmodified gold nanoparticles and conjugated polyelectrolytes.

We have demonstrated a novel sensing strategy employing single-stranded probe DNA, unmodified gold nanoparticles, and a positively charged, water-soluble conjugated polyelectrolyte to detect a broad range of targets including nucleic acid (DNA) sequences, proteins, small molecules, and inorganic ions. This nearly "universal" biosensor approach is based on the observation that, while the conjugated polyelectrolyte specifically inhibits the ability of single-stranded DNA to prevent the aggregation of gold-nanoparticles, no such inhibition is observed with double-stranded or otherwise "folded" DNA structures. Colorimetric assays employing this mechanism for the detection of hybridization are sensitive and convenient--picomolar concentrations of target DNA are readily detected with the naked eye, and the sensor works even when challenged with complex sample matrices such as blood serum.

Label-free, dual-analyte electrochemical biosensors: a new class of molecular-electronic logic gates.

An "XOR" gate built using label-free, dual-analyte electrochemical sensors and the activation of this logic gate via changing concentrations of cocaine and the relevant cDNA as inputs are described.

Nonlinear transport in semiconducting polymers at high carrier densities.

Conducting and semiconducting polymers are important materials in the development of printed, flexible, large-area electronics such as flat-panel displays and photovoltaic cells. There has been rapid progress in developing conjugated polymers with high transport mobility required for high-performance field-effect transistors (FETs), beginning with mobilities around 10(-4) cm(2) V(-1) s(-1) to a recent report of 1 cm(2) V(-1) s(-1) for poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT). Here, the electrical properties of PBTTT are studied at high charge densities both as the semiconductor layer in FETs and in electrochemically doped films to determine the transport mechanism.

Electrochemical doping in electrolyte-gated polymer transistors.

By comparing the changes in pi-pi* absorption with the transconductance in PEO-LiClO4 electrolyte-gated FETs, we have demonstrated that the high channel currents obtained at low gate voltages result from reversible electrochemical doping of the semiconducting polymer film. At low temperatures, the conductivity of the electrochemically doped poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene), PBTTT-C14, is nonlinear with a crossover from dsigma(T)/dT > 0 to dsigma(T)/dT approximately 0 as a function of the source-drain voltage. High current densities, up to 10(6) A/cm2 at 4.

Beyond the metal-insulator transition in polymer electrolyte gated polymer field-effect transistors.

We have studied the carrier transport in poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene) field-effect transistors (FETs) at very high field-induced carrier densities (10(15) cm(-2)) using a polymer electrolyte as gate and gate dielectric. At room temperature, we find high current densities, 2 x 10(6) A/cm(2), and high metallic conductivities, 10(4) S/cm, in the FET channel; at 4.2 K, the current density is sustained at 10(7) A/cm(2).