3D-printing of dipyridamole/thermoplastic polyurethane materials for bone regeneration.

Tissue engineering combines biology and engineering to develop constructs for repairing or replacing damaged tissues. Over the last few years, this field has seen significant advancements, particularly in bone tissue engineering. 3D printing has revolutionised this field, allowing the fabrication of patient- or defect-specific scaffolds to enhance bone regeneration, thus providing a personalised approach that offers unique control over the shape, size, and structure of 3D-printed constructs.

3D Fabrication and Characterisation of Electrically Receptive PCL-Graphene Scaffolds for Bioengineered In Vitro Tissue Models.

Polycaprolactone (PCL) is a well-established biomaterial, offering extensive mechanical attributes along with low cost, biocompatibility, and biodegradability; however, it lacks hydrophilicity, bioactivity, and electrical conductivity. Advances in 3D fabrication technologies allow for these sought-after attributes to be incorporated into the scaffolds during fabrication. In this study, solvent-free Fused Deposition Modelling was employed to fabricate 3D scaffolds from PCL with increasing amounts of graphene (G), in the concentrations of 0.

Development of 3D-printed subcutaneous implants using concentrated polymer/drug solutions.

Implantable drug-eluting devices that provide therapeutic cover over an extended period of time following a single administration have potential to improve the treatment of chronic conditions. These devices eliminate the requirement for regular and frequent drug administration, thus reducing the pill burden experienced by patients. Furthermore, the use of modern technologies, such as 3D printing, during implant development and manufacture renders this approach well-suited for the production of highly tuneable devices that can deliver treatment regimens which are personalised for the individual.

Biocompatible Nanocomposite Coatings Deposited via Layer-by-Layer Assembly for the Mechanical Reinforcement of Highly Porous Interconnected Tissue-Engineered Scaffolds.

Tissue-engineered (TE) scaffolds provide an 'off-the-shelf' alternative to autograft procedures and can potentially address their associated complications and limitations. The properties of TE scaffolds do not always match the surrounding bone, often sacrificing porosity for improved compressive strength. Previously, the layer-by-layer (LbL) assembly technique was used to deposit nanoclay containing multilayers capable of improving the mechanical properties of open-cell structures without greatly affecting the porosity.

Nanoindentation and nano-scratching of hydroxyapatite coatings for resorbable magnesium alloy bone implant applications.

The corrosion rate of Mg alloys is currently too high for viable resorbable implant applications. One possible solution is to coat the alloy with a hydroxyapatite (HA) layer to slow the corrosion and promote bone growth. As such coatings can be under severe stresses during implant insertion, we present a nano-mechanical and nano-tribological investigation of RF-sputtered HA films on AZ31 Mg alloy substrates.

Direct monitoring of single-cell response to biomaterials by Raman spectroscopy.

There is continued focus on the development of new biomaterials and associated biological testing methods needed to reduce the time taken for their entry to clinical use. The application of Raman spectroscopy to the study of individual cells that have been in contact with biomaterials offers enhanced in vitro information in a potentially non-destructive testing regime. The work presented here reports the Raman spectral analysis of discreet U-2 OS bone cells after exposure to hydroxyapatite (HA) coated titanium (Ti) substrates in both the as-deposited and thermally annealed states.

The Surface Characterisation of Fused Filament Fabricated (FFF) 3D Printed PEEK/Hydroxyapatite Composites.

Polyetheretherketone (PEEK) is a high-performance thermoplastic polymer which has found increasing application in orthopaedics and has shown a lot of promise for 'made-to-measure' implants via additive manufacturing approaches. However, PEEK is bioinert and needs to undergo surface modification to make it at least osteoconductive to ensure a more rapid, improved, and stable fixation that will last longer in vivo. One approach to solving this issue is to modify PEEK with bioactive agents such as hydroxyapatite (HA).

Dual Network Composites of Poly(vinyl alcohol)-Calcium Metaphosphate/Alginate with Osteogenic Ions for Bone Tissue Engineering in Oral and Maxillofacial Surgery.

Despite considerable advances in biomaterials-based bone tissue engineering technologies, autografts remain the gold standard for rehabilitating critical-sized bone defects in the oral and maxillofacial (OMF) region. A majority of advanced synthetic bone substitutes (SBS's) have not transcended the pre-clinical stage due to inferior clinical performance and translational barriers, which include low scalability, high cost, regulatory restrictions, limited advanced facilities and human resources. The aim of this study is to develop clinically viable alternatives to address the challenges of bone tissue regeneration in the OMF region by developing 'dual network composites' (DNC's) of calcium metaphosphate (CMP)-poly(vinyl alcohol) (PVA)/alginate with osteogenic ions: calcium, zinc and strontium.

Nanocomposite-coated porous templates for engineered bone scaffolds: a parametric study of layer-by-layer assembly conditions.

Using the layer-by-layer (LbL) assembly technique to deposit mechanically reinforcing coatings onto porous templates is a route for fabricating engineered bone scaffold materials with a combination of high porosity, strength, and stiffness. LbL assembly involves the sequential deposition of nano- to micro-scale multilayer coatings from aqueous solutions. Here, a design of experiments (DOE) approach was used to evaluate LbL assembly of polyethyleneimine (PEI), polyacrylic acid (PAA), and nanoclay coatings onto open-cell polyurethane foam templates.

Management of oesophageal coins in children.

Objective: Is a watch and wait approach safe in asymptomatic patients presenting to the emergency department with a confirmed oesophageal coin on x-ray?

Methods: A retrospective case note review for children <16 years attending with a confirmed oesophageal coin on x-ray over a 7-year period (1 January 2004 to 31 December 2010).

Results: 89% (33/37) of coins in asymptomatic patients, who were conservatively managed, had passed spontaneously on repeat chest x-ray up to 18 h later. No patient who was discharged with a middle or lower oesophageal coin required a GA and no child who was treated conservatively developed any complications.

Nasal foreign bodies in children: kissing it better.

Objective: To evaluate the use, success rate and time in the paediatric emergency department when employing the kissing technique to remove nasal foreign bodies from children.

Methods: The present work was a retrospective case note review for children attending with a nasal foreign body over a 15-month period.

Results: In all, 116 children had a confirmed nasal foreign body and 84 were treated by the kissing technique with a success rate of 48.

Re-expansion pulmonary oedema and circulatory shock in a 20-year-old man.

Re-expansion pulmonary oedema is a well-recognized rare complication of the treatment of spontaneous pneumothorax. It has been associated with death in 20% of cases. A fit 20-year-old man who had returned from holiday 2 days previously presented with a large left-sided pneumothorax of 10 days' duration.