Processing factors affecting roughness, optical and mechanical properties of nanocellulose films for optoelectronics.

This work aims to understand how nanocellulose (NC) processing can modify the key characteristics of NC films to align with the main requirements for high-performance optoelectronics. The performance of these devices relies heavily on the light transmittance of the substrate, which serves as a mechanical support and optimizes light interactions with the photoactive component. Critical variables that determine the optical and mechanical properties of the films include the morphology of cellulose nanofibrils (CNF), as well as the concentration and turbidity of the respective aqueous suspensions.

Cellulose gelation in NaOH by CO absorption: Effects of holding time and concentration on biomaterial development.

We address the limited solubility and early onset of gelation of aqueous sodium hydroxide to position it as a preferred green solvent for cellulose. For this purpose, we expand the concentration window (up to 12 wt%) by using a CO-depleted air and adjusting the time the dope remains in the given atmosphere, before further processing (holding time) and regeneration conditions. Cellulose solutions are extruded following characteristic (rheology and extrusion) parameters to yield aligned filaments reaching tenacities up to 2.

Design of experiments to investigate multi-additive cellulose nanocrystal films.

Cellulose nanocrystal (CNC) suspensions can self-assemble into chiral nematic films upon the slow evaporation of water. These films are brittle, as indicated by their fracturing instead of plastically deforming once they are fully elastically deformed. This aspect can be mediated to some extent by plasticizing additives, such as glucose and glycerol, however, few reports consider more than one additive at a time or address the influence of additive content on the homogeneity of the self-assembled structure.

Perspective about Cellulose-Based Pressure and Strain Sensors for Human Motion Detection.

High-performance wearable sensors, especially resistive pressure and strain sensors, have shown to be promising approaches for the next generation of health monitoring. Besides being skin-friendly and biocompatible, the required features for such types of sensors are lightweight, flexible, and stretchable. Cellulose-based materials in their different forms, such as air-porous materials and hydrogels, can have advantageous properties to these sensors.

Plant-Based Structures as an Opportunity to Engineer Optical Functions in Next-Generation Light Management.

This review addresses the reconstruction of structural plant components (cellulose, lignin, and hemicelluloses) into materials displaying advanced optical properties. The strategies to isolate the main building blocks are discussed, and the effects of fibrillation, fibril alignment, densification, self-assembly, surface-patterning, and compositing are presented considering their role in engineering optical performance. Then, key elements that enable lignocellulosic to be translated into materials that present optical functionality, such as transparency, haze, reflectance, UV-blocking, luminescence, and structural colors, are described.

Cross-Linked and Surface-Modified Cellulose Acetate as a Cover Layer for Paper-Based Electrochromic Devices.

We studied the surface and microstructure of cellulose acetate (CA) films to tailor their barrier and mechanical properties for application in electrochromic devices (ECDs). Cross-linking of CA was carried out with pyromellitic dianhydride to enhance the properties relative to unmodified CA: solvent resistance (by 43% in acetone and 37% in DMSO), strength (by 91% for tensile at break), and barrier (by 65% to oxygen and 92% to water vapor). Surface modification via tetraethyl orthosilicate and octyltrichlorosilane endowed the films with hydrophobicity, stiffness, and further enhanced solvent resistance.

Investigating effects of high cellulase concentration on the enzymatic hydrolysis of the sisal cellulosic pulp.

The goal of this study was to investigate how the use of high concentration of cellulase may impact the properties of the substrate and the reaction medium during the enzymatic hydrolysis of the sisal pulp. Enzyme concentration of 0.9 mL g was considered for hydrolysis of a sisal cellulosic substrate, and the results were compared with previous ones using 0.