ACS Appl Mater Interfaces
August 2024
A composite of catalytic Lewis acidic zirconium oxyhydroxides (8 wt %) and a covalent organic framework (COF) was synthesized. X-ray diffraction and infrared (IR) spectroscopy reveal that COF's structure is preserved after loading with zirconium oxyhydroxides. Electron microscopy confirms a homogeneous distribution of nano- to sub-micron-sized zirconium clusters in the COF.
View Article and Find Full Text PDFThis paper describes a novel synthetic approach for the conversion of zero-valent copper metal into a conductive two-dimensional layered metal-organic framework (MOF) based on 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) to form Cu(HHTP). This process enables patterning of Cu(HHTP) onto a variety of flexible and porous woven (cotton, silk, nylon, nylon/cotton blend, and polyester) and non-woven (weighing paper and filter paper) substrates with microscale spatial resolution. The method produces conductive textiles with sheet resistances of 0.
View Article and Find Full Text PDFGarments protective against chemical warfare agents (CWAs) or accidently released toxic chemicals must block the transport of toxic gases/vapors for a substantial time and allow moisture transport for breathability. These demands are challenging: either the barriers block CWAs effectively but have poor breathability or barriers have excellent breathability but cannot block CWAs well. Existing protective garments employ large amounts of active carbon, making them quite heavy.
View Article and Find Full Text PDFThe most recent global health crisis caused by the SARS-CoV-2 outbreak and the alarming use of chemical warfare agents highlight the necessity to produce efficient protective clothing and masks against biohazard and chemical threats. However, the development of a multifunctional protective textile is still behind to supply adequate protection for the public. To tackle this challenge, we designed multifunctional and regenerable N-chlorine based biocidal and detoxifying textiles using a robust zirconium metal-organic framework (MOF), UiO-66-NH, as a chlorine carrier which can be easily coated on textile fibers.
View Article and Find Full Text PDFProtocols to create metal-organic framework (MOF)/polymer composites for separation, chemical capture, and catalytic applications currently rely on relatively slow solution-based processing to form single MOF composites. Here, we report a rapid, high-yield sorption-vapor method for direct simultaneous growth of single and multiple MOF materials onto untreated flexible and stretchable polymer fibers and films. The synthesis utilizes favorable reactant absorption into polymers coupled with rapid vapor-driven MOF crystallization to form high surface area (>250 m/g) composites, including UiO-66-NH, HKUST-1, and MOF-525 on spandex, nylon, and other fabrics.
View Article and Find Full Text PDFA strategy is developed to enhance the barrier protection of polyethylene oxide (PEO)-metal-organic framework (MOF) composite films against chemical warfare agent simulants. To achieve enhanced protection, an impermeable high-aspect-ratio filler in the form of Laponite RD (LRD) clay platelets was incorporated into a composite PEO film containing MOF UiO-66-NH. The inclusion of the platelets aids in mitigating permeation of inert hydrocarbons (octane) and toxic chemicals (2-chloroethyl ethyl sulfide, 2-CEES) of dimensions/chemistry similar to prominent vesicant threats while still maintaining high water vapor transport rates (WVTR).
View Article and Find Full Text PDFThermodynamic and kinetic properties of molecular adsorption and transport in metal-organic frameworks (MOFs) are crucially important for many applications, including gas adsorption, filtration, and remediation of harmful chemicals. Using the in situ H nuclear magnetic resonance (NMR) isotherm technique, we measured macroscopic thermodynamic and kinetic properties such as isotherms and rates of mass transfer while simultaneously obtaining microscopic information revealed by adsorbed molecules via NMR. Upon investigating isopropyl alcohol adsorption in MOF UiO-66 by in situ NMR, we obtained separate isotherms for molecules adsorbed at distinct environments exhibiting distinct NMR characteristics.
View Article and Find Full Text PDFGas capture and sequestration are valuable properties of metal-organic frameworks (MOFs) driving tremendous interest in their use as filtration materials for chemical warfare agents. Recently, the Zr-based MOF UiO-67 was shown to effectively adsorb and decompose the nerve-agent simulant, dimethyl methylphosphonate (DMMP). Understanding mechanisms of MOF-agent interaction is challenging due to the need to distinguish between the roles of the MOF framework and its particular sites for the activation and sequestration process.
View Article and Find Full Text PDFMetal-organic frameworks (MOFs) are promising candidates for the catalytic hydrolysis of nerve agents and their simulants. Though highly efficient, bulk water and volatile bases are often required for hydrolysis with these MOF catalysts, preventing real-world implementation. Herein we report a generalizable and scalable approach for integrating MOFs and non-volatile polymeric bases onto textile fibers for nerve agent hydrolysis.
View Article and Find Full Text PDFZirconium-based metal organic frameworks (Zr-MOFs) are highly chemically and thermally stable and have been of particular interest as reactive sorbents for chemical warfare agent (CWA) removal due to their fast and selective reactivity toward CWAs reported in buffer solutions. However, we find that decontamination of neat CWAs directly on Zr-MOFs, UiO-66, UiO-66-NH, and NU-1000 is rather slow, and the reactivity trend and products generated are very different from those in solution. Furthermore, we show that their decontamination rates are affected by the amount of moisture present in the MOFs.
View Article and Find Full Text PDFA fullerene-based photosensitizer is incorporated postsynthetically into a Zr -based MOF, NU-1000, for enhanced singlet oxygen production. The structural organic linkers in the MOF platform also act as photosensitizers which contribute to the overall generation of singlet oxygen from the material under UV irradiation. The singlet oxygen generated by the MOF/fullerene material is shown to oxidize sulfur mustard selectively to the less toxic bis(2-chloroethyl)sulfoxide with a half-life of only 11 min.
View Article and Find Full Text PDFMetal-organic frameworks (MOFs) in their free powder form have exhibited superior capacities for many gases when compared to other materials, due to their tailorable functionality and high surface areas. Specifically, the MOF HKUST-1 binds small Lewis bases, such as ammonia, with its coordinatively unsaturated copper sites. We describe here the use of HKUST-1 in mixed-matrix membranes (MMMs) prepared from polyvinylidene difluoride (PVDF) for the removal of ammonia gas.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
May 2016
Here we discuss the removal of nitrogen dioxide, an important toxic industrial chemical and pollutant, from air using the MOF UiO-66-NH2 . The amine group is found to substantially aid in the removal, resulting in unprecedented removal capacities upwards of 1.4 g of NO2 /g of MOF.
View Article and Find Full Text PDFA pyrene-based metal-organic framework (MOF) NU-1000 was used as a heterogeneous photocatalyst for the degradation of a sulfur mustard simulant, 2-chloroethyl ethyl sulfide (CEES). Using irradiation from a commercially available and inexpensive ultraviolet (UV) light-emitting diode (LED), singlet oxygen (O) is generated by NU-1000 and selectively oxidizes CEES to the nontoxic product 2-chloroethyl ethyl sulfoxide (CEESO). More importantly, this method was tested on the warfare agent sulfur mustard (HD) for the first time using O and a MOF catalyst, and this method proved to be effective in oxidizing sulfur mustard to nontoxic products without forming the toxic sulfone by-product.
View Article and Find Full Text PDFThe structure of a molecule and its concentration can strongly influence diffusional properties for transport in nanoporous materials. We study mass transfer of alkanes in BPL activated carbon using the concentration-swing frequency response method, which can easily discriminate among mass transfer mechanisms. We measure concentration-dependent diffusion rates for n-hexane, n-octane, n-decane, 2,7-dimethyloctane, and cyclodecane, which have different carbon numbers and geometries: straight chain, branched chain, and cyclic.
View Article and Find Full Text PDF