Turn-key Kerr soliton generation and tunable microwave synthesizer in dual-mode SiN microresonators.

This study investigates the thermal compensation mechanism in dual-mode SiN microresonators that demonstrates the ease of generation of single-solitons with nearly octave-wide spectral bandwidth. The deterministic creation of soliton frequency combs is achieved by merely switching the wavelength of a tunable laser or a semiconductor diode laser in a single step. The pump frequency detuning range that can sustain the soliton state is 30 gigahertz (GHz), which is approximately 100 times the resonance linewidth.

Versatile octave-spanning soliton crystals with high conversion efficiency in a SiN microresonator.

Microresonator-based soliton crystals are a key recent advancement in the study of the rich nonlinear dynamics of soliton states. The soliton crystals are self-organized temporal pulses filling the microresonator cavity and have strong comb lines with wide spacing making them of great interest in many potential applications such as communication and meteorology. However, achieving a broad spectrum, tunable repetition rates, and high conversion efficiency are still a challenge.

Self-heating allows athermal laser diode wavelength control using a thermally insulating sub-mount over a 70 °C range.

The wavelength of a single frequency quantum dot distributed feedback (DFB) laser operating in the O-band is athermalised over a 74 °C ambient temperature range. Two techniques are presented, one utilising the laser self-heating for tuning control, the other using a resistive heater. Both techniques show greatly improved power efficiency over conventional wavelength control schemes, and both demonstrate wavelength stability of better than 0.

Monolayer Capping Provides Close to Optimal Resistance to Laser Dewetting of Au Films.

Next-generation heat-assisted magnetic recording (HAMR) relies on fast, localized heating of the magnetic medium during the write process. Au plasmonic near-field transducers are an attractive solution to this challenge, but increased thermal stability of Au films is required to improve long-term reliability. This work compares the effect of nanoscale Al, AlO, and Ta capping films on Au thin films with Ti or Ta adhesion layers for use in HAMR and other high-temperature plasmonic applications.

Near-octave-spanning breathing soliton crystal in an AlN microresonator.

The soliton crystal (SC) was recently discovered as an extraordinary Kerr soliton state with regularly distributed soliton pulses and enhanced comb line power spaced by multiples of the cavity free spectral ranges (FSRs), which will significantly extend the application potential of microcombs in optical clock, signal processing, and terahertz wave systems. However, the reported SC spectra are generally narrow. In this Letter, we demonstrate the generation of a breathing SC in an aluminum nitride (AlN) microresonator (FSR ∼374), featuring a near-octave-spanning (1150-2200 nm) spectral range and a terahertz repetition rate of ∼1.

Wide range thermal and athermal operation of slotted surface grating lasers.

Athermalisation is a procedure in which the wavelength of a semiconductor laser remains unchanged even as the temperature is altered. This is achieved by altering the currents that flow through the laser so as to maintain the wavelength and avoid mode hops. In this study, we demonstrate that lasers operating with a large red-shift with respect to the gain peak yield the best performance in terms of the highest temperature operation and also in terms of the widest athermal operating range.

1.3 μm wavelength tunable single-mode laser arrays based on slots.

Two twelve-channel arrays based on surface-etched slot gratings, one with non-uniformly spaced slots and another with uniformly spaced slots are presented for laser operation in the O-band. A wavelength tuning range greater than 40 nm, with a side-mode suppression ratio (SMSR) > 40 dB over much of this range and output power greater than 20 mW, was obtained for the array with non-uniform slots over a temperature range of 15 °C - 60 °C. The introduction of multiple slot periods, chosen such that there is minimal overlap among the side reflection peaks, is employed to suppress modes lasing one free spectral range (FSR) from the intended wavelength.

Octave-spanning Kerr frequency comb generation with stimulated Raman scattering in an AlN microresonator.

Octave-spanning optical frequency combs (OFCs) are essential for various applications, such as precision metrology and astrophysical spectrometer calibration. In this Letter, we demonstrate, for the first time to our knowledge, the generation of octave-spanning Kerr frequency combs ranging from 1150 to 2400 nm in aluminum nitride (AlN) microring resonators, by pumping the modes at 250 mW on-chip power. By simply adjusting the pump detuning, we observe the transition and coexistence of Kerr OFC and stimulated Raman scattering.

Photolithography allows high-Q AlN microresonators for near octave-spanning frequency comb and harmonic generation.

Single-crystal aluminum nitride (AlN) possessing both strong Pockels and Kerr nonlinear optical effects as well as a very large band gap is a fascinating optical platform for integrated nonlinear optics. In this work, fully etched AlN-on-sapphire microresonators with a high-Q of 2.1 × 10 for the TE mode are firstly demonstrated with the standard photolithography technique.

Controlled Cavity-Free, Single-Photon Emission and Bipartite Entanglement of Near-Field-Excited Quantum Emitters.

We report theoretical statistics of 1- and 2-qubit (bipartite) systems, namely, photon antibunching and entanglement, of near-field excited quantum emitters. The sub-diffraction focusing of a plasmonic waveguide is shown to generate enough power over a sufficiently small region (<50 × 50 nm) to strongly drive quantum emitters. This enables ultrafast (10 s) single-photon emission as well as creates entangled states between two emitters when performing a controlled-NOT operation.

Genetic algorithm optimization of high order surface etched grating tunable laser array.

A genetic algorithm is developed with a view to optimizing surface-etched grating tunable lasers over a large optimization space comprised of several variables. Using this approach, a new iteration of slotted lasers arrays are optimized showing significant improvements over previous designs. Output power, lower grating order, fabrication tolerance and performance at high temperatures are among key parameters improved.

Comparison of Metal Adhesion Layers for Au Films in Thermoplasmonic Applications.

If thermoplasmonic applications such as heat-assisted magnetic recording are to be commercially viable, it is necessary to optimize both thermal stability and plasmonic performance of the devices involved. In this work, a variety of different adhesion layers were investigated for their ability to reduce dewetting of sputtered 50 nm Au films on SiO substrates. Traditional adhesion layer metals Ti and Cr were compared with alternative materials of Al, Ta, and W.

850 nm GaAs/AlGaAs DFB lasers with shallow surface gratings and oxide aperture.

We present and experimentally demonstrate a novel oxide-confined ridge-waveguide distributed feedback (DFB) laser with the first-order surface grating using only a single growth step. The metal contacts are laterally offset from the ridge waveguide to inject current thus avoiding unwanted light absorption from the electrodes. The oxide aperture is defined by selective wet oxidation of aluminium-rich material, which confines the injection current from the electrodes to the active layer under the ridge waveguide.

High-performance InP-based Mach-Zehnder polarization beam splitter with a 19 dB extinction ratio across C-band.

A high-performance InP-based polarization beam splitter (PBS) using a symmetrical Mach-Zehnder interferometer is experimentally demonstrated. The waveguides are aligned along the [011] direction, which results in a small reverse bias required and easy adjustment to realize the PBS. The experimental results indicate that the polarization extinction ratio (PER) is over 19 dB in the wavelength range from 1525 to 1570 nm with one arm injected with a 4.

Synthesis of centimeter-size free-standing perovskite nanosheets from single-crystal lead bromide for optoelectronic devices.

Considerable attention has been drawn to the lead halide perovskites (LHPs) because of their outstanding optoelectronic characteristics. LHP nanosheets (NSs) grown from single crystalline lead halide possess advantages in device applications as they provide the possibility for control over morphology, composition, and crystallinity. Here, free-standing lead bromide (PbBr) single-crystalline NSs with sizes up to one centimeter are synthesized from solution.

Less is More: Improved Thermal Stability and Plasmonic Response in Au Films via the Use of SubNanometer Ti Adhesion Layers.

The use of a metallic adhesion layer is known to increase the thermo-mechanical stability of Au thin films against solid-state dewetting, but in turn results in damping of the plasmonic response, reducing their utility in applications such as heat-assisted magnetic recording (HAMR). In this work, 50 nm Au films with Ti adhesion layers ranging in thickness from 0 to 5 nm were fabricated, and their thermal stability, electrical resistivity, and plasmonic response were measured. Subnanometer adhesion layers are demonstrated to significantly increase the stability of the thin films against dewetting at elevated temperatures (>200 °C), compared to more commonly used adhesion layer thicknesses that are in the range of 2-5 nm.

CMOS-compatible multi-band plasmonic TE-pass polarizer.

A CMOS-compatible plasmonic TE-pass polarizer capable of working in the O, E, S, C, L, and U bands is numerically analyzed. The device is based on an integrated hybrid plasmonic waveguide (HPW) with a segmented metal design. The segmented metal will avoid the propagation of the TM mode, confined in the slot of the HPW, while the TE fundamental mode will pass.

Solvent-Engineered Stress in Nanoscale Materials.

Nanoscale materials are frequently coated with surface stabilization layers during growth that prevent flocculation in solution and facilitate processing technologies such as ink-jet device printing. Here, we show that few-nanometer-thick stabilization layers typically used swell in the presence of certain solvents and impart significant stresses to the nanomaterial that remains even after the solvent has evaporated. Solvent swelling of the surface layer dramatically enhances nanomaterial-substrate adhesion via the collapse of the stabilization layer during solvent evaporation, preventing stress relaxation.

Non-resonant light scattering in dispersions of 2D nanosheets.

Extinction spectra of nanomaterial suspensions can be dominated by light scattering, hampering quantitative spectral analysis. No simple models exist for the wavelength-dependence of the scattering coefficients in suspensions of arbitrary-sized, high-aspect-ratio nanoparticles. Here, suspensions of BN, talc, GaS, Ni(OH), Mg(OH) and Cu(OH) nanosheets are used to explore non-resonant scattering in wide-bandgap 2D nanomaterials.

Effective heat dissipation in an adiabatic near-field transducer for HAMR.

To achieve a feasible heat-assisted magnetic recording (HAMR) system, a near-field transducer (NFT) is necessary to strongly focus the optical field to a lateral region measuring tens of nanometres in size. An NFT must deliver sufficient power to the recording medium as well as maintain its structural integrity. The self-heating problem in the NFT causes materials failure that leads to the degradation of the hard disk drive performance.

Focusing element formed by scattering structures in a planar dielectric waveguide.

A design process for creating integrated diffractive focusing elements for use in planar waveguides is presented. The elements consist of a linear array of holes etched into the core layer of a planar dielectric waveguide. A complete element is a few micrometers in size, while the individual holes are sub-micrometer.

Control of the plasmonic near-field in metallic nanohelices.

The optical response of metallic nanohelices is mainly governed by a longitudinal localised surface plasmon resonance (LSPR) which arises due to the helical anisotropy of the system. Up to now, experimental studies have predominantly addressed the far-field response, despite the fact that the LSPR being of broad interest for converting incoming light into strongly enhanced (chiral) optical near-fields. Here, we demonstrate the control and spatial reproducibility of the plasmon-induced electromagnetic near-field around metallic nanohelices via surface-enhanced Raman scattering.

Optical spectral sweep comb liquid flow rate sensor.

In microfluidic chip applications, the flow rate plays an important role. Here we propose a simple liquid flow rate sensor by using a tilted fiber Bragg grating (TFBG) as the sensing element. As the water flows in the vicinity of the TFBG along the fiber axis direction, the TFBG's spectrum changes due to its contact with water.

Optical and thermal analysis of the light-heat conversion process employing an antenna-based hybrid plasmonic waveguide for HAMR.

We investigate a tapered, hybrid plasmonic waveguide which has previously been proposed as an optically efficient near-field transducer (NFT), or component thereof, in several devices which aim to exploit nanofocused light. We numerically analyze how light is transported through the waveguide and ultimately focused via effective-mode coupling and taper optimization. Crucial dimensional parameters in this optimization process are identified that are not only necessary to achieve maximum optical throughput, but also optimum thermal performance with specific application towards heat-assisted magnetic recording (HAMR).

Measurements of milli-Newton surface tension forces with tilted fiber Bragg gratings.

Small lateral forces (lower than 0.1 N) cannot normally be measured with conventional single-mode fiber-based sensors because of the high value of their Young modulus (>70  GPa). Here we demonstrate the measurement of lateral forces in the range from 0.