Resistance of Boron Nitride Nanotubes to Radiation-Induced Oxidation.

We present unprecedented results on the damage thresholds and pathways for boron nitride nanotubes (BNNT) under the influence of energetic electrons in an oxidative gas environment, using an environmental aberration-corrected electron microscope over a range of oxygen pressures. We observe a damage cascade process that resists damage until a higher electron dose, compared with carbon nanotubes, initiating at defect-free BNNT sidewalls and proceeding through the conversion from crystalline nanotubes to amorphous boron nitride (BN), resisting oxidation throughout. We compare with prior results on the oxidation of carbon nanotubes and present a model that attributes the onset of damage in both cases to a physisorbed oxygen layer that reduces the threshold for damage onset.

Ion transport and ultra-efficient osmotic power generation in boron nitride nanotube porins.

Nanotube porins form transmembrane nanomaterial-derived scaffolds that mimic the geometry and functionality of biological membrane channels. We report synthesis, transport properties, and osmotic energy harvesting performance of another member of the nanotube porin family: boron nitride nanotube porins (BNNTPs). Cryo-transmission electron microscopy imaging, liposome transport assays, and DNA translocation experiments show that BNNTPs reconstitute into lipid membranes to form functional channels of ~2-nm diameter.

Dynamics of high-speed electrical tree growth in electron-irradiated polymethyl methacrylate.

Dielectric materials are foundational to our modern-day communications, defense, and commerce needs. Although dielectric breakdown is a primary cause of failure of these systems, we do not fully understand this process. We analyzed the dielectric breakdown channel propagation dynamics of two distinct types of electrical trees.

Environmental damping and vibrational coupling of confined fluids within isolated carbon nanotubes.

Because of their large surface areas, nanotubes and nanowires demonstrate exquisite mechanical coupling to their surroundings, promising advanced sensors and nanomechanical devices. However, this environmental sensitivity has resulted in several ambiguous observations of vibrational coupling across various experiments. Herein, we demonstrate a temperature-dependent Radial Breathing Mode (RBM) frequency in free-standing, electron-diffraction-assigned Double-Walled Carbon Nanotubes (DWNTs) that shows an unexpected and thermally reversible frequency downshift of 10 to 15%, for systems isolated in vacuum.

Carbon-Nanotube-Encapsulated-Sulfur Cathodes for Lithium-Sulfur Batteries: Integrated Computational Design and Experimental Validation.

To mitigate lithium-polysulfides (Li-PSs) shuttle in lithium-sulfur batteries (LiSBs), a unique carbon-nanotube-encapsulated-sulfur (S@CNT) cathode material with optimum open-ring sizes (ORSs) on the CNT walls were designed using an integrated computational approach followed by experimental validation. By calculating the transport barrier of Li ion through ORSs on the CNT walls and comparing the molecular size of solvents and Li-PSs with ORSs, optimum open-rings with 16-30 surrounding carbon atoms were predicted to selectively allow transportation of Li ion and evaporated sulfur while blocking both Li-PS and solvent molecules. A CNT oxidation process was proposed and simulated to generate these ORSs, and the results indicated that the optimum ORSs can be achieved by narrowly controlling the oxidation parameters.

Electron beam-induced crystallization of AlO gate layer on β-GaO MOS capacitors.

Electron irradiation was observed to induce crystallization of amorphous AlO films grown by atomic layer deposition on β-GaO substrates. Growth of large, strongly oriented crystalline γ-AlO regions was induced using conventional-mode transmission electron microscopy (TEM) and observed to propagate outward from the interface as well as from the previously crystallized AlO. A few nm of epitaxial AlO was already visible at the beginning of the crystallization front propagation.

A structure and activity relationship for single-walled carbon nanotube growth confirmed by observations and modeling.

The structure and phase transformation of a cobalt (Co) catalyst, during single walled carbon nanotube (SWCNT) growth, is elucidated for inactive, active and deactivated nanoparticles by in situ imaging using an environmental transmission electron microscope. During nanotube growth, the structure was analyzed using Miller indices to determine the types of planes that favor anchoring or liftoff of nanotubes from the Co catalyst. Density functional theory was further applied to model the catalyst interactions to compare the work of adhesion of the catalyst's faceted planes to understand the interactions of different Miller planes with the graphene structure.

Imaging Arrangements of Discrete Ions at Liquid-Solid Interfaces.

The individual and collective behavior of ions near electrically charged interfaces is foundational to a variety of electrochemical phenomena encountered in biology, energy, and the environment. While many theories have been developed to predict the interfacial arrangements of counterions, direct experimental observations and validations have remained elusive. Utilizing cryo-electron microscopy, here we directly visualize individual counterions and reveal their discrete interfacial layering.

Field-Dependent Heat Dissipation of Carbon Nanotube Electric Currents.

We study heat dissipation of a multi-wall carbon nanotube (MWCNT) device fabricated from two crossed nanotubes on a SiN substrate under the influence of a constant (DC) electric bias. By monitoring the temperature of the substrate, we observe negligible Joule heating within the nanotube lattice itself and instead heating occurs in the insulating substrate directly via a remote-scattering heating effect. Using finite element analysis, we estimate a remote heating parameter, β, as the ratio of the power dissipated directly in the substrate to the total power applied.

Topological frustration of artificial spin ice.

Frustrated systems, typically characterized by competing interactions that cannot all be simultaneously satisfied, display rich behaviours not found elsewhere in nature. Artificial spin ice takes a materials-by-design approach to studying frustration, where lithographically patterned bar magnets mimic the frustrated interactions in real materials but are also amenable to direct characterization. Here, we introduce controlled topological defects into square artificial spin ice lattices in the form of lattice edge dislocations and directly observe the resulting spin configurations.

Boron-doped few-walled carbon nanotubes: novel synthesis and properties.

Few-walled carbon nanotubes offer a unique marriage of graphitic quality and robustness to ink-processing; however, doping procedures that may alter the band structure of these few-walled nanotubes are still lacking. This report introduces a novel solution-injected chemical vapor deposition growth process to fabricate the first boron-doped few-walled carbon nanotubes (B-FWNTs) reported in literature, which may have extensive applications in battery devices. A comprehensive characterization of the as-grown B-FWNTs confirms successful boron substitution in the graphitic lattice, and reveals varying growth parameters impact the structural properties of B-FWNT yield.

Radiation-induced solidification of ionic liquid under extreme electric field.

An extreme electric field on the order of 10(10) V m(-1) was applied to the free surface of an ionic liquid to cause electric-field-induced evaporation of molecular ions from the liquid. The point of ion emission was observed in situ using a TEM. The resulting electrospray emission process was observed to create nanoscale high-aspect-ratio dendritic features that were aligned with the direction of the electric field.

Ammonium Laurate Surfactant for Cleaner Deposition of Carbon Nanotubes.

Experiments probing the properties of individual carbon nanotubes (CNTs) and those measuring bulk composites show vastly different results. One major issue limiting the results is that the procedures required to separate and test CNTs introduce contamination that changes the properties of the CNT. These contamination residues often come from the resist used in lithographic processing and the surfactant used to suspend and deposit the CNTs, commonly sodium dodecyl sulfate (SDS).

Miniature all-solid-state heterostructure nanowire Li-ion batteries as a tool for engineering and structural diagnostics of nanoscale electrochemical processes.

Complex interfacial phenomena and phase transformations that govern the operation of Li-ion batteries require detailed nanoscale 3D structural and compositional characterization that can be directly related to their capacity and electrical transport properties. For this purpose, we have designed model miniature all solid-state radial heterostructure Li-ion batteries composed of LiCoO2 cathode, LiPON electrolyte and amorphous Si anode shells, which were deposited around metallized high-aspect-ratio Si nanowires as a scaffolding core. Such diagnostic batteries, the smallest, complete secondary Li-ion batteries realized to date, were specifically designed for in situ electrical testing in a field-emission scanning electron microscope and/or transmission electron microscope.

Expanded graphite as superior anode for sodium-ion batteries.

Graphite, as the most common anode for commercial Li-ion batteries, has been reported to have a very low capacity when used as a Na-ion battery anode. It is well known that electrochemical insertion of Na(+) into graphite is significantly hindered by the insufficient interlayer spacing. Here we report expanded graphite as a Na-ion battery anode.

A measurement technique for circumventing hysteresis and conductance drift in carbon nanotube field-effect transistors.

We present a measurement protocol that effectively eliminates both the hysteresis and the temporal drift typically observed in the channel conductance of single-walled carbon nanotube field-effect transistors (SWNT FETs) during the application of gate voltages. Before each resistance measurement, the gate is first stepped through a series of alternating positive and negative voltages to produce a neutral charge distribution within the device. This process is highly effective at removing the hysteresis in the channel conductance, and time-dependent measurements further demonstrate that the drain current is stable and single-valued, independent of the prior measurement history.

Hoop-strong nanotubes for battery electrodes.

The engineering of hollow nanostructures is a promising approach to addressing instabilities in silicon-based electrodes for lithium-ion batteries. Previous studies showed that a SiOx coating on silicon nanotubes (SiNTs) could function as a constraining layer and enhance capacity retention in electrodes with low mass loading, but we show here that similarly produced electrodes having negligible SiOx coating and significantly higher mass loading show relatively low capacity retention, fading quickly within the early cycles. We find that the SiNT performance can still be enhanced, even in electrodes with high mass loading, by the use of Ni functional coatings on the outer surface, leading to greatly enhanced capacity retention in a manner that could scale better to industrially relevant battery capacities.

Diagnosing nanoelectronic components using coherent electrons.

We present the direct observation, using off-axis electron holography (EH), of the electric potential distribution in the vicinity of a single carbon nanotube electrically biased by two closely spaced contacts. When our results are combined with finite element modeling, we demonstrate the ability to separately observe the electrostatic potential drops across the metal contacts at the interface with the nanotube and along the length of the nanotube itself. We demonstrate that the uneven resistivity of different contacts can cause an asymmetric EH phase shift, which can readily be identified and quantified.

Silicon nanowires: electron holography studies of doped p-n junctions and biased Schottky barriers.

We report an in situ examination of individual Si p-n junction nanowires (NWs) using off-axis electron holography (EH) during transmission electron microscopy. The SiNWs were synthesized by chemical vapor deposition with an axial dopant profile from n- to p-type, and then placed inside the transmission electron microscope as a cantilever geometry in contact with a movable Pt probe for in situ biasing measurements during simultaneous EH observations. The phase shift from EH indicates the potential shift between the p- and n-segments to be 1.

A beaded-string silicon anode.

Interfacial instability is a fundamental issue in heterostructures ranging from biomaterials to joint replacement and electronic packaging. This challenge is particularly intriguing for lithium ion battery anodes comprising silicon as the ion storage material, where ultrahigh capacity is accompanied by vast mechanical stress that threatens delamination of silicon from the current collectors at the other side of the interface. Here, we describe Si-beaded carbon nanotube (CNT) strings whose interface is controlled by chemical functionalization, producing separated amorphous Si beads threaded along mechanically robust and electrically conductive CNT.

Highly transparent and flexible nanopaper transistors.

Renewable and clean "green" electronics based on paper substrates is an emerging field with intensifying research and commercial interests, as the technology combines the unique properties of flexibility, cost efficiency, recyclability, and renewability with the lightweight nature of paper. Because of its excellent optical transmittance and low surface roughness, nanopaper can host many types of electronics that are not possible on regular paper. However, there can be tremendous challenges with integrating devices on nanopaper due to its shape stability during processing.

Remote Joule heating by a carbon nanotube.

Minimizing Joule heating remains an important goal in the design of electronic devices. The prevailing model of Joule heating relies on a simple semiclassical picture in which electrons collide with the atoms of a conductor, generating heat locally and only in regions of non-zero current density, and this model has been supported by most experiments. Recently, however, it has been predicted that electric currents in graphene and carbon nanotubes can couple to the vibrational modes of a neighbouring material, heating it remotely.

Lithium-assisted electrochemical welding in silicon nanowire battery electrodes.

From in situ transmission electron microscopy (TEM) observations, we present direct evidence of lithium-assisted welding between physically contacted silicon nanowires (SiNWs) induced by electrochemical lithiation and delithiation. This electrochemical weld between two SiNWs demonstrates facile transport of lithium ions and electrons across the interface. From our in situ observations, we estimate the shear strength of the welded region after delithiation to be approximately 200 MPa, indicating that a strong bond is formed at the junction of two SiNWs.

Electrolyte stability determines scaling limits for solid-state 3D Li ion batteries.

Rechargeable, all-solid-state Li ion batteries (LIBs) with high specific capacity and small footprint are highly desirable to power an emerging class of miniature, autonomous microsystems that operate without a hardwire for power or communications. A variety of three-dimensional (3D) LIB architectures that maximize areal energy density has been proposed to address this need. The success of all of these designs depends on an ultrathin, conformal electrolyte layer to electrically isolate the anode and cathode while allowing Li ions to pass through.

Reducing disorder in artificial kagome ice.

Artificial spin ice has become a valuable tool for understanding magnetic interactions on a microscopic level. The strength in the approach lies in the ability of a synthetic array of nanoscale magnets to mimic crystalline materials, composed of atomic magnetic moments. Unfortunately, these nanoscale magnets, patterned from metal alloys, can show substantial variation in relevant quantities such as the coercive field, with deviations up to 16%.