Creation and Validation of a Novel 3-Dimensional Pediatric Hip Ultrasound Model.

Objectives: The aim of this study was to create and validate a 3-dimensional (3D) ultrasound model with normal and abnormal pediatric hip joint anatomy that is comparable to a pediatric hip joint in appearance and anatomy and replicates sonographic characteristics of a pediatric hip joint.

Methods: A 3D rendering of the bone and soft tissue was created from a computed tomography pelvic scan of a pediatric patient. This rendering was modified to include a unilateral joint effusion.

Distal femoral replacement for the treatment of periprosthetic distal femoral fractures around a total knee arthroplasty: a meta-analysis.

Background: Periprosthetic fracture is a rare complication of arthroplasty but can have devastating consequences for the patient and presents a complex surgical challenge. Locking compression plate and retrograde intramedullary nail are both widely accepted surgical fixation techniques for distal femoral periprosthetic fractures around a total knee arthroplasty. Although there is still a need for further high-quality research into both techniques, there is even less literature concerning the use of distal femoral replacement to treat distal femoral periprosthetic fractures.

Antimicrobial prophylaxis with teicoplanin plus gentamicin in primary total joint arthroplasty.

: To compare prosthetic joint infection (PJI) and acute kidney injury (AKI) rates among cohorts before and after changing our hospital's antimicrobial prophylactic regimen from cefuroxime to teicoplanin plus gentamicin. : We retrospectively studied all patients undergoing primary total joint arthroplasty at our hospital 18 months pre- and post-implementation of the change in practice. All deep infections identified during follow-up were assessed against the European Bone and Joint Infection Society (EBJIS) definitions for PJI.

Hip Resurfacing Arthroplasty: Past, Present and Future.

The history of hip resurfacing arthroplasty (HRA) has faced numerous challenges and undergone decades of evolution in materials and methods. These innovations have been translated to the successes of current prostheses and represent a surgical and mechanical achievement. Modern HRAs now have long term outcomes with excellent results in specific patient groups as demonstrated in national joint registries.

Robotic Arthroplasty Clinical and cost Effectiveness Randomised controlled trial (RACER-knee): a study protocol.

Introduction: Robotic-assisted knee replacement systems have been introduced to healthcare services worldwide in an effort to improve clinical outcomes for people, although high-quality evidence that they are clinically, or cost-effective remains sparse. Robotic-arm systems may improve surgical accuracy and could contribute to reduced pain, improved function and lower overall cost of total knee replacement (TKR) surgery. However, TKR with conventional instruments may be just as effective and may be quicker and cheaper.

Camouflage uncovered: what should happen next?

Recent publications have drawn attention to the fact that some brands of joint replacement may contain variants which perform significantly worse (or better) than their 'siblings'. As a result, the National Joint Registry has performed much more detailed analysis on the larger families of knee arthroplasties in order to identify exactly where these differences may be present and may hitherto have remained hidden. The analysis of the Nexgen knee arthroplasty brand identified that some posterior-stabilized combinations have particularly high revision rates for aseptic loosening of the tibia, and consequently a medical device recall has been issued for the Nexgen 'option' tibial component which was implicated.

Adventitial cystic disease of the common femoral vein: an unusual cause of lower extremity swelling and review of the literature.

We report the case of a 61-year-old man who had presented with acute unilateral limb swelling. Computed tomography venography and duplex ultrasound demonstrated compression of the right common femoral vein by a common femoral vein adventitial cyst. Before intervention, the patient had developed an acute deep vein thrombosis of the right common femoral vein and great saphenous vein.

BNT162b2 vaccine uptake and effectiveness in UK healthcare workers - a single centre cohort study.

In this single centre cohort study we assessed BNT162B2 vaccine uptake and effectiveness among UK healthcare workers (HCWs) during a time of high community COVID-19 prevalence. Early uptake among HCWs was 62.3% (1409/2260), however there were significant differences in uptake between age groups, ethnic origins, and job roles.

Reconstruction with a Custom made Prosthetic Wrist Arthrodesis after Bone Tumor Resections of the Distal Radius. Single Centre Experience.

 The present study aimed at analyzing the clinical, radiological and functional results of the reconstruction of the distal radius after tumor resection with a custom-made metal arthrodesis implant and compare them with other types of distal radius reconstruction, as presented in the literature. To our best knowledge, this is the first article describing this particular type of implant and patient functionality.  Functional outcomes of reconstruction of the distal radius were assessed in a series of 4 patients.

Impact of comorbidities on the safety and effectiveness of hip and knee arthroplasty surgery.

Aims: Access to joint replacement is being restricted for patients with comorbidities in a number of high-income countries. However, there is little evidence on the impact of comorbidities on outcomes. The purpose of this study was to determine the safety and effectiveness of hip and knee arthroplasty in patients with and without comorbidities.

Metal-on-metal total hip arthroplasty: does increasing modularity affect clinical outcome?

Background: Modularity of metal-on-metal (MoM) implants has come under scrutiny due to concerns regarding additional sources of metal debris. This study is a retrieval analysis of implants from the same manufacturer with the same MoM bearing surface. The difference between the implants was presence or absence of modular junctions.

Managing NON-DIAGNOSTIC biopsies in musculoskeletal tumours in a specialist centre: Deciding on the algorithm.

Introduction: Core needle biopsy is an effective method of obtaining tissue diagnosis. However, a diagnostic dilemma arises when lesional tissue is non-diagnostic which obviates considering radiological guided re-biopsy (RB) or an open surgical biopsy but the question raised is which serves as a better diagnostic tool.

Patient And Methods: We retrospectively reviewed data from a prospectively collected database of 4516 core needle biopsies performed in our specialist musculoskeletal tumour centre over a 6-year period.

Preoperative sonographic ulnar nerve mapping in the postoperative elbow.

Objective: To describe the technique of sonographic ulnar nerve mapping in the postoperative elbow for surgical planning.

Materials And Methods: A retrospective review of a surgical databank identified 24 patients, all aged 18 years and older with a history of orthopedic elbow surgery, who were referred for preoperative sonographic mapping of the ulnar nerve prior to subsequent surgery. All cases were reviewed for patient demographics, clinical presentation, prior surgical interventions, and ultrasound technique.

Does modularity of metal-on-metal hip implants increase cobalt: chromium ratio?

Background: Blood metal ion levels are used in the surveillance of metal-on-metal (MoM) hip implants. Modular implants contain an extra source of metal debris that may affect the ratio of metal ions in the blood.

Methods: This was a retrospective study of 503 patients with hip replacements made by a single manufacturer (Smith & Nephew, Warwick, UK) with the same bearing surface.

Non-invasive massive growing prostheses reduce infection in paediatric cancer patients.

Purpose: In this study, we asked the question of whether non-invasive (NI) extendible bone tumour implants are as reliable and reduce infection when compared with patients who received a minimally invasive (MI) extendible implant.

Methods: Forty-two NI extendible bone tumour implants were investigated at a mean follow-up of 22 months (range, 1-87 months) and 63 MI implants at a mean follow-up of 49 months (range, 1-156 months).

Results: Kaplan-Meier analysis showed that the probability of MI implant survival was 58.

Retrieval Findings of Recalled Dual-Taper Hips.

Background: The recent high-profile recalls of several dual-taper hip designs pose questions regarding why those designs perform poorly. We aimed to characterize taper damage in 1 recalled design to understand failure mechanisms to inform surgeons on which patients should be considered at risk of revision and when to revise.

Methods: High-precision measurement equipment was used to characterize the metal loss from the neck-stem interface of 116 retrieved Rejuvenate femoral stems (Stryker Howmedica Osteonics) revised because of an adverse reaction to metal debris.

Factors associated with proximal femur fracture determined in a large cadaveric cohort.

Many researchers have used cadaveric fracture tests to determine the relationship between proximal femur (hip) fracture strength and a multitude of possible explanatory variables, typically considered one or two at a time. These variables include subject-specific proximal femur variables such as femoral neck areal bone mineral density (aBMD), sex, age, and geometry, as well as physiological hip fracture event variables such as fall speed and angle of impact. However, to our knowledge, no study has included all of these variables simultaneously in the same experimental dataset.

3D-printed Patient-specific Guides for Hip Arthroplasty.

Surgeons and engineers constantly search for methods to improve the surgical positioning of implants used for joint arthroplasty. Rapid prototyping is being used to develop patient-specific instrumentation (PSI) and has already been successfully translated into large-scale clinical use for knee arthroplasty. PSI has been used in shoulder arthroplasty; however, it is not yet known whether PSI provides improved accuracy and outcomes compared with conventional methods in either shoulder arthroplasty or knee arthroplasty.

Effect of Bearing Type on Taper Material Loss in Hips From 1 Manufacturer.

Background: Numerous studies have reported on clinical significant volumes of material loss and corrosion at the head-stem junction of metal-on-metal (MOM) hips; less is understood about metal-on-polyethylene (MOP) hips. We compared the effect of bearing type (MOM vs MOP) on taper material loss for a hip system of a single design.

Methods: In this cohort study, we recruited retrieved MOM (n = 30) and MOP (n = 22) bearing hips that were consecutively received at our center.

Assessing for Cardiotoxicity from Metal-on-Metal Hip Implants with Advanced Multimodality Imaging Techniques.

Background: High failure rates of metal-on-metal (MoM) hip implants prompted regulatory authorities to issue worldwide safety alerts. Circulating cobalt from these implants causes rare but fatal autopsy-diagnosed cardiotoxicity. There is concern that milder cardiotoxicity may be common and underrecognized.

Subfascial fat herniation: sonographic features of back mice.

Three adult patients are described with sonographic features of subfascial fat hernation. Each patient presented to the musculoskeletal ultrasound department at our institution for the evaluation of a palpable mass of the low back. Subfascial fat hernation, also known as back mice and fibro-fatty nodule, are an uncommon cause of a palpable mass in the low back or low back pain.