Unifying the ORR and OER with surface oxygen and extracting their intrinsic activities on platinum.

Common half-cell measurements deliver oxygen reduction activities linked to the chosen scan rate, limiting their value for fundamental and comparative studies on platinum. Here we show a deconvolution of the intrinsic kinetics from the effect of surface oxygen on platinum. We find an electronic effect of the surface oxygen, substantiate a Tafel slope of ~120 mV/decade, obtain an exchange current density of 13 ± 4 µA/cm, and an activity of 7 mA/cm at 900 mV.

Electrocatalysis of the Oxygen Reduction Reaction by Copper Complexes with Tetradentate Tripodal Ligands.

The tetradentate tripodal ligand scaffold is capable of supporting the expected geometries of the copper ion during the oxygen reduction reaction (ORR) catalysis. As such, we probed the reactivity of copper complexes with these types of ligands by electronically and structurally tweaking the tris(pyridin 2-ylmethyl)amine (tmpa) scaffold by progressively replacing the terminal pyridines with carboxylate donors. This work shows that systems with one carboxylato donor (bpg = bis(pyridin-2-ylmethyl)glycine), (bpp = (3-(bis(pyridin-2-ylmethyl)amino)propanoic acid)) are active in electrocatalyzing the homogeneous ORR under circumneutral aqueous conditions.

Bipolar Verdazyl Radicals for Symmetrical Batteries: Properties and Stability in All States of Charge.

Redox flow batteries based on organic electrolytes are promising energy storage devices, but stable long-term cycling is often difficult to achieve. Bipolar organic charge-storage materials allow the construction of symmetrical flow batteries (i. e.

Blatter Radicals as Bipolar Materials for Symmetrical Redox-Flow Batteries.

Redox-active organic molecules are promising charge-storage materials for redox-flow batteries (RFBs), but material crossover between the posolyte and negolyte and chemical degradation are limiting factors in the performance of all-organic RFBs. We demonstrate that the bipolar electrochemistry of 1,2,4-benzotriazin-4-yl (Blatter) radicals allows the construction of batteries with symmetrical electrolyte composition. Cyclic voltammetry shows that these radicals also retain reversible bipolar electrochemistry in the presence of water.

Electrochemical Characterization of Aromatic Molecules with 1,4-Diaza Groups for Flow Battery Applications.

The aqueous redox flow battery is a promising technology for large-scale low cost energy storage. The rich possibilities for the tailoring of organic molecules and the possibility to discover active materials of lower cost and decreased environmental impact continue to drive research and development of organic compounds suitable for redox flow battery applications. In this work, we focus on the characterization of aromatic molecules with 1,4-diaza groups for flow battery applications.

Enhancement of the chemical stability in confined δ-Bi2O3.

Bismuth-oxide-based materials are the building blocks for modern ferroelectrics, multiferroics, gas sensors, light photocatalysts and fuel cells. Although the cubic fluorite δ-phase of bismuth oxide (δ-Bi2O3) exhibits the highest conductivity of known solid-state oxygen ion conductors, its instability prevents use at low temperature. Here we demonstrate the possibility of stabilizing δ-Bi2O3 using highly coherent interfaces of alternating layers of Er2O3-stabilized δ-Bi2O3 and Gd2O3-doped CeO2.

An electrochemical impedance spectroscopy investigation of the overpotentials in Li-O2 batteries.

Lithium-O2 (Li-O2) batteries are currently limited by a large charge overpotential at practically relevant current densities, and the origin of this overpotential has been heavily debated in the literature. This paper presents a series of electrochemical impedance measurements suggesting that the increase in charge potential is not caused by an increase in the internal resistance. It is proposed that the potential shift is instead dictated by a mixed potential of parasitic reactions and Li2O2 oxidation.

Communication: the influence of CO2 poisoning on overvoltages and discharge capacity in non-aqueous Li-Air batteries.

The effects of Li2CO3 like species originating from reactions between CO2 and Li2O2 at the cathode of non-aqueous Li-air batteries were studied by density functional theory (DFT) and galvanostatic charge-discharge measurements. Adsorption energies of CO2 at various nucleation sites on a stepped (11̅00) Li2O2 surface were determined and even a low concentration of CO2 effectively blocks the step nucleation site and alters the Li2O2 shape due to Li2CO3 formation. Nudged elastic band calculations show that once CO2 is adsorbed on a step valley site, it is effectively unable to diffuse and impacts the Li2O2 growth mechanism, capacity, and overvoltages.

On/off photoswitching of the electropolymerizability of terthiophenes.

In this contribution the polymerization of terthiophene, to form an alkene bridged alpha,alpha-coupled sexithiophene polymer, is controlled by light; i.e. the electropolymerizability of the monomer 1F is switched off and on with UV and visible light, respectively.

Photochromism and electrochemistry of a dithienylcyclopentene electroactive polymer.

A bifunctional substituted dithienylcyclopentene photochromic switch bearing electropolymerisable methoxystyryl units, which enable immobilization of the photochromic unit on conducting substrates, is reported. The spectroscopic, electrochemical, and photochemical properties of a monomer in solution are compared with those of the polymer formed through oxidative electropolymerization. The electroactive polymer films prepared on gold, platinum, glassy carbon, and indium titanium oxide (ITO) electrodes were characterized by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM).

Microscopy and spectroscopy of interactions between metallopolymers and carbon nanotubes.

The interaction between redox polymers, based on Ru- or Os-bis(2,2'-bipyridyl)-poly(4-vinylpyridine), and carbon nanotubes was investigated by spectroscopic and microscopic techniques. These metallopolymers were found to be excellent dispersants for nanotubes, as a result of a good wetting interaction between polymer and nanotubes. The results obtained show that well-coated individual nanotubes can be obtained.

Scanning tunneling spectroscopy in an ionic liquid.

Molecular redox levels can be used to modulate tunneling currents through single or small numbers of molecules and induce molecular electronic device function. While most of these devices require cryogenic conditions, room temperature operation has been demonstrated by using electrochemical gating in aqueous environments. The latter have, however, serious shortcomings with a view on their relatively high volatility and narrow stability ranges in terms of potential.

Conducting polymers containing in-chain metal centers: electropolymerization of oligothienyl-substituted {M(tpy)2} complexes and in situ conductivity studies, M = Os(II), Ru(II).

The electropolymerization of a series of Ru and Os bis-terpyridine complexes that form rodlike polymers with bithienyl, quaterthienyl, or hexathienyl bridges has been studied. Absorption spectroscopy, scanning electron microscopy, and cyclic voltammetry have been used to characterize the monomers and resulting polymer films. The absolute dc conductivity of the quaterthienyl-bridged {Ru(tpy)2} and {Os(tpy)2} polymers is unusually large and independent of the identity of the metal center at 1.

Solvent effects on charge transport through solid deposits of [Os(4,4'-diphenyl-2,2'-dipyridyl)2Cl2].

Mechanically attached, solid-state films of [Os(4,4'-diphenyl-2,2'-dipyridyl)2Cl2] have been formed on gold macro- and microelectrodes and their voltammetric properties investigated. The voltammetric response of these films associated with the Os(2+/3+) redox reaction is reminiscent of that observed for an ideal reversible, solution phase redox couple only when the contacting electrolyte contains of the order of 40% v/v of acetonitrile (ACN). The origin of this effect appears to involve preferential solvation of the redox centres by acetonitrile which facilitates the incorporation of charge compensating counterions.

Assessment of intercomponent interaction in phenylene bridged dinuclear ruthenium(II) and osmium(II) polypyridyl complexes.

The synthesis and characterisation of [Ru(bipy)(2)(L1)](2+) and the homodinuclear complexes [M(bipy)(2)(L1)M(bipy)(2)](4+)(where M = Ru or Os), employing the ditopic ligand, 1,4-phenylene-bis(1-pyridin-2-ylimidazo[1,5-a]pyridine)(L1), are reported. The complexes are identified by elemental analysis, UV/Vis, emission, resonance Raman, transient resonance Raman and (1)H NMR spectroscopy, mass spectrometry and electrochemistry. The X-ray structure of the complex [Ru(bipy)(2)(L1)(bipy)(2)Ru](PF(6))(4) is also reported.

A rod-like polymer containing (Ru(terpy)2) units prepared by electrochemical coupling of pendant thienyl moieties.

A new rod-like coordination polymer consisting of (Ru-(terpy)2) motifs bridged by bithiophene units has been prepared by electrochemical polymerisation in acidic organic medium.