Spectroscopic and electrophoresis study of substitution on the surface of gold nanoparticles by different mercaptoalkyl carboxylic acids and bioconjugation with bovine serum albumin.

To develop bioconjugated materials, it is necessary to understand how the various elements present in a conjugate interact with one another. To gain insights into nanoparticle-capping agent-protein interactions, gold nanoparticles (AuNPs) measuring 30 nm in diameter were coated with different molecules bearing a thiol group: 3-mercaptopropionic acid, 6-mercaptohexanoic acid, and 11-mercaptoundecanoic acid. The covalent conjugation of AuNPs to the protein bovine serum albumin (BSA) via a cross-linker reaction with N-hydroxysuccinimide and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide was systematically investigated under different reaction conditions with variation of the concentrations of the mercaptoalkyl carboxylic acid (MA) and BSA.

Fabrication of glycine-functionalized maghemite nanoparticles for magnetic removal of copper from wastewater.

Maghemite nanoparticles (MNPs) were functionalized with glycine, by a cost-effective and environmentally friendly procedure, as an alternative route to typical amine-functionalized polymeric coatings, for highly efficient removal of copper ions from water. MNPs were synthesized by co-precipitation method and adsorption of glycine was investigated as a function of ligand concentration and pH. The efficiency of these functionalized nanoparticles for removal of Cu(2+) from water has been explored and showed that adsorption is highly dependent of pH and that it occurs either by forming chelate complexes and/or by electrostatic interaction.

Magnetic ionic liquids produced by the dispersion of magnetic nanoparticles in 1-n-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMI.NTf2).

̀This paper reports on the advancement of magnetic ionic liquids (MILs) as stable dispersions of surface-modified γ-Fe(2)O(3), Fe(3)O(4), and CoFe(2)O(4) magnetic nanoparticles (MNPs) in a hydrophobic ionic liquid, 1-n-butyl 3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMI.NTf(2)). The MNPs were obtained via coprecipitation and were characterized using powder X-ray diffraction, transmission electron microscopy, Raman spectroscopy and Fourier transform near-infrared (FT-NIR) spectroscopy, and magnetic measurements.

Ionic liquids as recycling solvents for the synthesis of magnetic nanoparticles.

This work describes an easy synthesis (one pot) of MFe(2)O(4) (M = Co, Fe, Mn, and Ni) magnetic nanoparticles MNPs by the thermal decomposition of Fe(Acac)(3)/M(Acac)(2) by using BMI·NTf(2) (1-n-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) or BMI·PF(6) (1-n-butyl-3-methylimidazolium hexafluorophosphate) ionic liquids (ILs) as recycling solvents and oleylamine as the reducing and surface modifier agent. The effects of reaction temperature and reaction time on the features of the magnetic nanomaterials (size and magnetic properties) were investigated. The growth of the MNPs is easily controlled in the IL by adjusting the reaction temperature and time, as inferred from Fe(3)O(4) MNPs obtained at 150 °C, 200 °C and 250 °C with mean diameters of 8, 10 and 15 nm, respectively.

Synthesis and characterization of magnetic composites based on cis-polyisoprene and CoFe2O4 nanoparticles.

CoFe2O4 nanoparticles were obtained by the co-precipitation method. They were further modified by the adsorption of ricinoleic acid (RA). The non-modified and modified CoFe2O4/RA nanoparticles were characterized by transmission electron microscopy (TEM), atomic force microscopy (AFM), Raman, and Fourier transform infrared (FTIR) spectroscopy.

Determination of methyl ester contents in biodiesel blends by FTIR-ATR and FTNIR spectroscopies.

Partial last square regression (PLS) and artificial neural network (ANN) combined to FTIR-ATR and FTNIR spectroscopies have been used to design calibration models for the determination of methyl ester content (%, w/w) in biodiesel blends (methyl ester+diesel). Methyl esters were obtained by the methanolysis of soybean, babassu, dende, and soybean fried oils. Two sets of samples have been used: Group I, binary mixtures (diesel+one kind of methyl ester), corresponding to 96 biodiesel blends (0-100%, w/w), and Group II, quaternary mixtures (diesel+three types of methyl esters), corresponding to 60 biodiesel blends (0-100%, w/w).

The observation of high order overtones and combinations in the SERRS spectra of a perylene dye spin coated onto silver island films.

The intensity of high harmonics and the background observed in the SERRS spectra of the bis(4-chlorbenzylimido)perylene (CLPTCD), spin-coated onto silver nanostructures are discussed. The SERRS spectra of an Ag island film spin coated with 50 microL of a 8.7 x 10(-7) M of CLPTCD in CH2Cl2 excited at 514.

Disclosure of the imidazolium cation coordination and stabilization mode in ionic liquid stabilized gold(0) nanoparticles.

A surface-enhanced Raman spectroscopy (SERS) study of imidazolium ionic liquid stabilized gold(0) nanoparticles (GNPs) furnished previously unknown knowledge about the coordination and stabilization mode of the imidazolium cation. GNPs were prepared by hydrazine reduction of a chloroauric acid solution in 1-triethylene glycol monomethyl ether-3-methylimidazolium methanesulfonate 2 as ether-functionalized room-temperature ionic liquid (RTIL). UV-vis spectroscopy showed the presence of GNP aggregates as absorptions extended to the NIR region.

Adulteration of diesel/biodiesel blends by vegetable oil as determined by Fourier transform (FT) near infrared spectrometry and FT-Raman spectroscopy.

In this work it has been shown that the routine ASTM methods (ASTM 4052, ASTM D 445, ASTM D 4737, ASTM D 93, and ASTM D 86) recommended by the ANP (the Brazilian National Agency for Petroleum, Natural Gas and Biofuels) to determine the quality of diesel/biodiesel blends are not suitable to prevent the adulteration of B2 or B5 blends with vegetable oils. Considering the previous and actual problems with fuel adulterations in Brazil, we have investigated the application of vibrational spectroscopy (Fourier transform (FT) near infrared spectrometry and FT-Raman) to identify adulterations of B2 and B5 blends with vegetable oils. Partial least square regression (PLS), principal component regression (PCR), and artificial neural network (ANN) calibration models were designed and their relative performances were evaluated by external validation using the F-test.

Surface-enhanced Raman scattering at the silver electrode/ionic liquid (BMIPF6) interface.

This is the first report of in situ SER spectra of chemical species adsorbed on a Ag/room temperature ionic liquid (RTIL) interface. We have investigated the dependence of the SERS intensity of the RTIL derived from 1-n-butyl-3-methylimidazolium hexafluorophosfate (BMIPF6) adsorbed on a silver electrode. It has been shown that the BMI+ adsorbs on the silver electrode for potentials more negative than -0.

The use of smoke acid as an alternative coagulating agent for natural rubber sheets' production.

A comparative study of rubber sheets obtained using formic, acetic, and smoke acid as coagulants is shown for latex obtained from native Amazonian trees and also from commercial cultivated trees. The evaluation of both processes of coagulation was carried out by spectroscopic and physical-chemical analysis, showing no differences in the rubber sheets obtained. This new method of rubber sheet preparation was introduced into Amazonian rainforest rubber tapper communities, which are actually producing in large scale.

Photoluminescence quenching effect on porous silicon films for gas sensors application.

Porous silicon (PS) films were investigated by Raman, and photoluminescence (PL) spectroscopies using different laser excitations: 488.0, 514.5, 632.

A spectrocolorimetric study on the effect of ultraviolet irradiation of four tropical hardwoods.

Colour modifications caused by exposure to artificial UV radiation (350 nm, UV-A) of four tropical hardwoods, jatobá, angelim vermelho, garapeira, and marupá, have been evaluated by diffuse reflectance spectroscopy and by the CIE-L*a*b* system. To obtain the absorption maxima of the chromophore species formed during UV irradiation, Kubelka-Munk (K-M) difference spectra (non-irradiated-irradiated) have been recorded as a function of exposure time. The K-M difference spectra have shown that the investigated species develop strong absorption bands in the visible region upon UV irradiation that were assigned to the formation of lignin and extractive photodegradation products.