Understanding the flow behavior around marine biofilms.

platforms capable of mimicking the hydrodynamic conditions prevailing in natural aquatic environments have been previously validated and used to predict the fouling behavior on different surfaces. Computational Fluid Dynamics (CFD) has been used to predict the shear forces occurring in these platforms. In general, these predictions are made for the initial stages of biofilm formation, where the amount of biofilm does not affect the flow behavior, enabling the estimation of the shear forces that initial adhering organisms have to withstand.

Viscous Microcapsules as Microbioreactors to Study Mesenchymal Stem/Stromal Cells Osteolineage Commitment.

It is essential to design a multifunctional well-controlled platform to transfer mechanical cues to the cells in different magnitudes. This study introduces a platform, a miniaturized bioreactor, which enables to study the effect of shear stress in microsized compartmentalized structures. In this system, the well-established cell encapsulation system of liquefied capsules (LCs) is used as microbioreactors in which the encapsulated cells are exposed to variable core viscosities to experience different mechanical forces under a 3D dynamic culture.

Editorial for the Special Issue on Microfluidics and Lab-on-a-Chip Applications for Biosensing.

Microfluidics refers the use of interdisciplinary science and engineering concepts that can control and manipulate small fluidic volumes [...

Microfluidics combined with fluorescence hybridization (FISH) for detection.

One of the most prevalent healthcare-associated infection is the urinary tract infection (UTI), caused by opportunistic pathogens such as or non-albicans species (NACS). Urine culture methods are routinely used for UTI diagnostics due to their specificity, sensitivity and low-cost. However, these methods are also laborious, time- and reagent-consuming.

Red blood cells tracking and cell-free layer formation in a microchannel with hyperbolic contraction: A CFD model validation.

Background And Objective: In recent years, progress in microfabrication technologies has attracted the attention of researchers across disciplines. Microfluidic devices have the potential to be developed into powerful tools that can elucidate the biophysical behavior of blood flow in microvessels. Such devices can also be used to separate the suspended physiological fluid from whole in vitro blood, which includes cells.

Predictive Models of Dairy Cow Thermal State: A Review from a Technological Perspective.

Dairy cattle are particularly sensitive to heat stress due to the higher metabolic rate needed for milk production. In recent decades, global warming and the increase in dairy production in warmer countries have stimulated the development of a wide range of environmental control systems for dairy farms. Despite their proven effectiveness, the associated energy and water consumption can compromise the viability of dairy farms in many regions, due to the cost and scarcity of these resources.

Underwater Energy Harvesting to Extend Operation Time of Submersible Sensors.

A linear electromagnetic energy harvesting device for underwater applications, fabricated with a simple manufacturing process, was developed to operate with movement frequencies from 0.1 to 0.4 Hz.

Integration of FISH and Microfluidics.

Suitable molecular methods for a faster microbial identification in food and clinical samples have been explored and optimized during the last decades. However, most molecular methods still rely on time-consuming enrichment steps prior to detection, so that the microbial load can be increased and reach the detection limit of the techniques.In this chapter, we describe an integrated methodology that combines a microfluidic (lab-on-a-chip) platform, designed to concentrate cell suspensions and speed up the identification process in Saccharomyces cerevisiae , and a peptide nucleic acid fluorescence in situ hybridization (PNA-FISH) protocol optimized and adapted to microfluidics.

Analysing the Initial Bacterial Adhesion to Evaluate the Performance of Antifouling Surfaces.

The aim of this work was to study the initial events of adhesion to polydimethylsiloxane, which is critical for the development of antifouling surfaces. A parallel plate flow cell was used to perform the initial adhesion experiments under controlled hydrodynamic conditions (shear rates ranging between 8 and 100/s), mimicking biomedical scenarios. Initial adhesion studies capture more accurately the cell-surface interactions as in later stages, incoming cells may interact with the surface but also with already adhered cells.

Bubbles Moving in Blood Flow in a Microchannel Network: The Effect on the Local Hematocrit.

Air inside of blood vessels is a phenomenon known as gas embolism. During the past years, studies have been performed to assess the influence of air bubbles in microcirculation. In this study, we investigated the flow of bubbles in a microchannel network with several bifurcations, mimicking part of a capillary system.

Review on Microbubbles and Microdroplets Flowing through Microfluidic Geometrical Elements.

Two-phase flows are found in several industrial systems/applications, including boilers and condensers, which are used in power generation or refrigeration, steam generators, oil/gas extraction wells and refineries, flame stabilizers, safety valves, among many others. The structure of these flows is complex, and it is largely governed by the extent of interphase interactions. In the last two decades, due to a large development of microfabrication technologies, many microstructured devices involving several elements (constrictions, contractions, expansions, obstacles, or T-junctions) have been designed and manufactured.

Biofilm formation behaviour of marine filamentous cyanobacterial strains in controlled hydrodynamic conditions.

Marine biofouling has severe economic impacts and cyanobacteria play a significant role as early surface colonizers. Despite this fact, cyanobacterial biofilm formation studies in controlled hydrodynamic conditions are scarce. In this work, computational fluid dynamics was used to determine the shear rate field on coupons that were placed inside the wells of agitated 12-well microtiter plates.

Blood Cells Separation and Sorting Techniques of Passive Microfluidic Devices: From Fabrication to Applications.

Since the first microfluidic device was developed more than three decades ago, microfluidics is seen as a technology that exhibits unique features to provide a significant change in the way that modern biology is performed. Blood and blood cells are recognized as important biomarkers of many diseases. Taken advantage of microfluidics assets, changes on blood cell physicochemical properties can be used for fast and accurate clinical diagnosis.

Geometrical effects in the hemodynamics of stenotic and non-stenotic left coronary arteries-numerical and in vitro approaches.

Atherosclerosis is a common cardiovascular disease found in the left coronary artery (LCA), closely linked to local hemodynamic, which, in turn, is highly influenced by the artery geometry. The hemodynamics in the LCA was studied in a patient-specific geometry without any sign of disease using both numerical and in vitro approaches. The influence of non-planarity was evaluated through two models of the patient-specific LCA that deviate from its original geometry in their planarity.

Assessment of the Deformability and Velocity of Healthy and Artificially Impaired Red Blood Cells in Narrow Polydimethylsiloxane (PDMS) Microchannels.

Malaria is one of the leading causes of death in underdeveloped regions. Thus, the development of rapid, efficient, and competitive diagnostic techniques is essential. This work reports a study of the deformability and velocity assessment of healthy and artificially impaired red blood cells (RBCs), with the purpose of potentially mimicking malaria effects, in narrow polydimethylsiloxane microchannels.

Deformation of Red Blood Cells, Air Bubbles, and Droplets in Microfluidic Devices: Flow Visualizations and Measurements.

Techniques, such as micropipette aspiration and optical tweezers, are widely used to measure cell mechanical properties, but are generally labor-intensive and time-consuming, typically involving a difficult process of manipulation. In the past two decades, a large number of microfluidic devices have been developed due to the advantages they offer over other techniques, including transparency for direct optical access, lower cost, reduced space and labor, precise control, and easy manipulation of a small volume of blood samples. This review presents recent advances in the development of microfluidic devices to evaluate the mechanical response of individual red blood cells (RBCs) and microbubbles flowing in constriction microchannels.

A numerical and experimental study of acoustic micromixing in 3D microchannels for lab-on-a-chip devices.

This paper reports a numerical and experimental study of acoustic streaming and micromixing in polydimethylsiloxane microchannels. The mixing between two fluids flowing in microchannels was evaluated through the following conditions: (1) using a 28 μm thick β-poly(vinylidene fluoride) (β-PVDF) as a piezoelectric transducer actuated with a 24 Vpp and 40 MHz sinusoidal voltage; (2) using different flow rates. The results suggest that the mixing length increases as the flow rate increases and that the acoustic streaming phenomenon leads to a reduction on the mixing length.

Yeasts identification in microfluidic devices using peptide nucleic acid fluorescence in situ hybridization (PNA-FISH).

Peptide nucleic acid fluorescence in situ hybridization (PNA-FISH) is a highly specific molecular method widely used for microbial identification. Nonetheless, and due to the detection limit of this technique, a time-consuming pre-enrichment step is typically required before identification. In here we have developed a lab-on-a-chip device to concentrate cell suspensions and speed up the identification process in yeasts.

Microbubble moving in blood flow in microchannels: effect on the cell-free layer and cell local concentration.

Gas embolisms can hinder blood flow and lead to occlusion of the vessels and ischemia. Bubbles in microvessels circulate as tubular bubbles (Taylor bubbles) and can be trapped, blocking the normal flow of blood. To understand how Taylor bubbles flow in microcirculation, in particular, how bubbles disturb the blood flow at the scale of blood cells, experiments were performed in microchannels at a low Capillary number.

Sympatry between Alouatta caraya and Alouatta clamitans and the rediscovery of free-ranging potential hybrids in Southern Brazil.

Records of sympatry between Alouatta caraya and A. clamitans are rare despite their extensive range overlap. An example of their current sympatry and the rediscovery of free-ranging potential hybrids of A.