Negative curvature hollow core fiber sensor for the measurement of strain and temperature.

Three different types of strain and temperature sensors based on negative curvature hollow core fiber (NCHCF) are proposed. Each sensor is produced by splicing a small section of the NCHCF between two sections of single mode fiber. Different types of interferometers are obtained simply by changing the splicing conditions.

Cortisol AuPd plasmonic unclad POF biosensor.

This paper presents the development and feasibility tests of a cortisol immunosensor. The sensor is based on surface plasmon resonance (SPR) using an unclad plastic optical fiber (POF) in which the SPR is used as sensitivity enhancer, promoted by a gold/palladium (AuPd) alloy coating. The AuPd coated fibers were functionalized with an anti-cortisol antibody and passivated with bovine serum albumin (BSA) to be tested in the presence of cortisol as target analyte.

Subclinical ventricular dysfunction in rheumatoid arthritis.

Patients with rheumatoid arthritis (RA) are at higher risk for having underdiagnosed heart failure, however there are no recommendations regarding echocardiographic screening. We aimed to determine the prevalence of subclinical ventricular dysfunction in RA applying current echocardiographic guidelines, its association with patients' characteristics, biomarkers and prognostic parameters and compare the 2016 guidelines to the recommendations from 2009. Prospective study of RA patients without known heart disease, categorized as preserved ventricular function (PVF), systolic dysfunction (SD), isolated diastolic dysfunction (DD) or indeterminate diastolic function (IDF) as per the 2016 echocardiography guidelines-or any ventricular dysfunction (AVD) comprehending the last 3.

Embedded Fiber Sensors to Monitor Temperature and Strain of Polymeric Parts Fabricated by Additive Manufacturing and Reinforced with NiTi Wires.

This paper focuses on three main issues regarding Material Extrusion (MEX) Additive Manufacturing (AM) of thermoplastic composites reinforced by pre-functionalized continuous Nickel-Titanium (NiTi) wires: (i) Evaluation of the effect of the MEX process on the properties of the pre-functionalized NiTi, (ii) evaluation of the mechanical and thermal behavior of the composite material during usage, (iii) the inspection of the parts by Non-Destructive Testing (NDT). For this purpose, an optical fiber sensing network, based on fiber Bragg grating and a cascaded optical fiber sensor, was successfully embedded during the 3D printing of a polylactic acid (PLA) matrix reinforced by NiTi wires. Thermal and mechanical perturbations were successfully registered as a consequence of thermal and mechanical stimuli.

Clinical evaluation of an optical fiber-based probe for the assessment of central arterial pulse waves.

The aim of this study, enrolling 118 patients, was to clinically evaluate the accuracy of carotid pulse waveform acquisition with a new non-invasive optical fiber probe using invasive and non-invasive pressure readings as references. Pulse waves were acquired simultaneously in the ascending aorta and right common carotid; for the non-invasive study, the pulses were sequentially acquired using the optical fiber device and the Complior Analyse (Alam Medical, France) device in the right carotid artery. For all subjects, the pulse waveforms assessed using the optical fiber sensor and the references were superimposed to analyze the deviation and point-by-point correlation.

Polymer optical fiber Bragg grating inscription with a single Nd:YAG laser pulse.

We experimentally demonstrate the first polymer optical fiber Bragg gratings inscribed with only one Nd:YAG laser (266 nm) pulse. The gratings have been inscribed in a single-mode poly (methyl methacrylate) optical fiber, with a core doped with benzyl dimethyl ketal for photosensitivity enhancement. One laser pulse with a duration of 8 ns and energy of 72 µJ is adequate to introduce a refractive index change of 0.

Central arterial pulse waveform acquisition with a portable pen-like optical fiber sensor.

Objective: Pulse waveform features related to cardiovascular pathologies and arterial stiffness have been extensively studied, and optical fiber sensors have been studied with an aim to simplify the pulse waveform acquisition in the carotid artery. In this paper, a novel optical fiber sensor to record pulse waveform in the carotid artery has been proposed.

Methods: The pulse waveform optical fiber sensor design, based on fiber Bragg gratings, is presented.

Feasibility studies of Bragg probe for noninvasive carotid pulse waveform assessment.

The arterial stiffness evaluation is largely reported as an independent predictor of cardiovascular diseases. The central pulse waveform can provide important data about arterial health and has been studied in patients with several pathologies, such as diabetes mellitus, coronary artery disease and hypertension. The implementation and feasibility studies of a fiber Bragg grating probe for noninvasive monitoring of the carotid pulse are described based on fiber Bragg grating technology.

Optical sensors based on plastic fibers.

The recent advances of polymer technology allowed the introduction of plastic optical fiber in sensor design. The advantages of optical metrology with plastic optical fiber have attracted the attention of the scientific community, as they allow the development of low-cost or cost competitive systems compared with conventional technologies. In this paper, the current state of the art of plastic optical fiber technology will be reviewed, namely its main characteristics and sensing advantages.

Characterization of different water/powder ratios of dental gypsum using fiber Bragg grating sensors.

The impact of five different water/powder (w/p) ratios in the characterization of high strength dental stone was evaluated, since the recommendations of the gypsum' manufacturers are not always correctly followed by the dental prosthesis technicians. Fiber Bragg grating (FBG) sensors were used to measure the setting expansion and temperature variation which occurred during the setting reaction for each w/p ratio, as well as the thermal expansion coefficient. Thick mixtures with low w/p ratios had more crystals impinging upon each other during crystal growth, resulting in more expansion and more heat released.

In the trail of a new bio-sensor for measuring strain in bone: osteoblastic biocompatibility.

Fibre Bragg Grating (FBG) is an optical sensor recorded within the core of a standard optical fibre, which responds faithfully to strain and temperature. FBG sensors are a promising alternative to other sensing methodologies to assess bone mechanics in vivo. However, response of bone cells/bone tissue to FBGs and its sensing capability in this environment have not been recorded yet.