Stöber method and its nuances over the years.

Some characteristics of silica-based materials, such as the control/adjustment of their physical and chemical properties, compatibility, and friendly-use synthesis methods, have held the attention of several scientific groups over the years. This condition of prominence becomes even more evident when we seek these characteristics at the micro- and/or nanoscale. Among existing methods to obtain these micro/nanomaterials, the Stöber method is the focus of this review.

Biocides and techniques for their encapsulation: a review.

Biocides are compounds that are broadly used to protect products and equipment against microbiological damage. Encapsulation can effectively increase physicochemical stability and allow for controlled release of encapsulated biocides. We categorized microencapsulation into coacervation, sol-gel, and self-assembly methods.

Nanomaterials to help eco-friendly leather processing.

The leather industry converts the hide, a byproduct of slaughterhouses, into leather, a value-added product. This old industry generates wastes, causing environmental pollution. However, nanomaterials can help to decrease this problem.

Degradation of pharmaceuticals in wastewater matrices through solar light-driven photocatalyst prepared from petrochemical waste.

Pharmaceuticals, such as dipyrone (DIP), paracetamol (PCT), and propranolol (PPN), are widely used analgesics and beta-blockers with the greatest presence in wastewaters and, consequently, in natural waters. The present work evaluated solar light-driven photocatalyst from petrochemical industrial waste (PW) as a strategy for the degradation of three pharmaceuticals in different water matrices (distilled water-DW, simulated wastewater-SWW, and real hospital wastewater-RHWW). All experiments were carried out in a solar photo-reactor with a capacity of 1 L and the experimental condition employed was a catalyst concentration of 350 mg L at pH 5.

Sulfur determination using the SiS diatomic molecule via HR-CS GF MAS and direct analysis of solid samples: A versatile method for different matrices.

In this work, a simple and reliable method was proposed for sulfur determination in different matrices using the diatomic molecule SiS via high-resolution continuum source graphite furnace molecular absorption spectrometry (HR-CS GF MAS) and direct analysis of solid samples. This investigation was carried out using six sulfur standard solutions, NaS, NaSO, BeSO, thiourea, l-cysteine and sulfamic acid, and nine certified reference materials (CRMs). All measurements were performed using the SiS analytical line at 282.

Antimicrobial activity of some natural extracts encapsulated within silica matrices.

Natural extracts (anthocyanins, tannin, anatto, curcuma and olive leaf extracts) were encapsulated within a silica network by acid or base-catalyzed sol-gel methods. The nominal encapsulated contents were between 2.5 and 50wt.

Structural, textural and morphological characteristics of tannins from Acacia mearnsii encapsulated using sol-gel methods: Applications as antimicrobial agents.

Tannins from Acacia mearnsii were encapsulated using four different sol-gel methods acid (SGAR), basic (SGBR), silicate (SGSR) and non-hydrolytic (SGNHR) routes. The hybrid materials were analyzed using a set of techniques to characterize their structure, texture and morphology. The antimicrobial performance of the encapsulated materials was evaluated against different microorganisms (Staphylococcus aureus, Escherichia coli, Aspergillus niger and Candida sp.

Photocatalytic degradation of rhodamine B, paracetamol and diclofenac sodium by supported titania-based catalysts from petrochemical residue: effect of doping with magnesium.

Three different lots of a residual Ziegler-Natta catalyst slurry (bearing Ti and Mg) obtained from an industrial petrochemical plant were employed as sources for the photocatalyst supported on silica. The effect of additional magnesium (1.0-25.

Hybrid Thin Film Organosilica Sol-Gel Coatings To Support Neuronal Growth and Limit Astrocyte Growth.

Thin films of silica prepared by a sol-gel process are becoming a feasible coating option for surface modification of implantable neural sensors without imposing adverse effects on the devices' electrical properties. In order to advance the application of such silica-based coatings in the context of neural interfacing, the characteristics of silica sol-gel are further tailored to gain active control of interactions between cells and the coating materials. By incorporating various readily available organotrialkoxysilanes carrying distinct organic functional groups during the sol-gel process, a library of hybrid organosilica coatings is developed and investigated.

Multitask Imidazolium Salt Additives for Innovative Poly(l-lactide) Biomaterials: Morphology Control, Candida spp. Biofilm Inhibition, Human Mesenchymal Stem Cell Biocompatibility, and Skin Tolerance.

Candida species have great ability to colonize and form biofilms on medical devices, causing infections in human hosts. In this study, poly(l-lactide) films with different imidazolium salt (1-n-hexadecyl-3-methylimidazolium chloride (C16MImCl) and 1-n-hexadecyl-3-methylimidazolium methanesulfonate (C16MImMeS)) contents were prepared, using the solvent casting process. Poly(l-lactide)-imidazolium salt films were obtained with different surface morphologies (spherical and directional), and the presence of the imidazolium salt in the surface was confirmed.

Industrial and agroindustrial wastes: an echotechnological approach to the production of supported photocatalysts.

Agroindustrial wastes (rice husk, exhausted bark acacia, and tobacco dust) and foundry sands from the iron foundry industry were employed as a support source for photocatalysts. TiCl4 was used as the titanium precursor in the preparation of the supported photocatalysts. The solids were characterized by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), diffuse reflectance spectroscopy over the ultraviolet range (DRS-UV), X-ray diffraction (XRD), small-angle X-ray scattering (SAXS), nitrogen adsorption-desorption at -196 °C and zeta potential (ZP) measurements.

Correlating the Morphological Properties and Structural Organization of Monodisperse Spherical Silica Nanoparticles Grown on a Commercial Silica Surface.

A variety of nanosilicas have been widely used to fabricate rough surfaces with superhydrophobic and superhydrophilic properties. In this context, we prepared mixed silica and mixed nanosilica that were generated by the growth and self-assembly of synthesized monodisperse silica nanospheres (11-30 nm, 363 m(2)  g(-1) ) on the surface of Sylopol-948 and Dispercoll S3030 by using a base-catalyzed sol-gel route. Using this process, the interactions and hierarchical structure between the nano- and microsized synthesized silica particles were studied by changing the amount of tetraethoxysilane.

Photocatalytic degradation of nicotine in an aqueous solution using unconventional supported catalysts and commercial ZnO/TiO₂ under ultraviolet radiation.

Nicotine, a highly toxic alkaloid, has been detected in effluents, surface and groundwater and even bottled mineral water. The present work studied the photocatalytic degradation of nicotine in aqueous solution, under ultraviolet irradiation. The experiments were carried out using commercial (ZnO, TiO2) and non-conventional catalysts, which were prepared from industrial and laboratory waste.

Infrared and Raman spectroscopic characterization of some organic substituted hybrid silicas.

Nine hybrid silicas bearing the organic substituent groups methyl, octyl, octadecyl, vinyl, phenyl, mercaptopropyl, isocyanatopropyl, chloropropyl and glycidoxypropyl were synthesized by an acid-catalyzed, hydrolytic sol-gel process. The resulting solid materials were characterized by their absorbance and attenuated total reflection (ATR) IR and Raman spectra. The latter technique proved to be particularly useful in the identification of the organic moieties in the hybrid silicas.

Tailored silica-antibiotic nanoparticles: overcoming bacterial resistance with low cytotoxicity.

New and more aggressive antibiotic resistant bacteria arise at an alarming rate and represent an ever-growing challenge to global health care systems. Consequently, the development of new antimicrobial agents is required to overcome the inefficiency of conventional antibiotics and bypass treatment limitations related to these pathologies. In this study, we present a synthesis protocol, which was able to entrap tetracycline antibiotic into silica nanospheres.

Effect of the sol-gel route on the textural characteristics of silica imprinted with Rhodamine B.

A series of silica xerogels that support Rhodamine B as a template were synthesized using distinct sol-gel routes, namely, acid-catalyzed routes, a base-catalyzed route, acid-catalyzed with base-catalyzed (two steps) hydrolytic routes, and a FeCl3 -catalyzed nonhydrolytic route. The extraction methods (thermal, Soxhlet, water washing, and ultrasound) were also evaluated. The resulting xerogels were characterized through porosimetry using nitrogen adsorption/desorption.

Long-term results of the Modified Thal procedure in patients with chagasic megaesophagus.

Background: Chagas disease is a serious public health issue in South and Central America due to its high prevalence, morbidity, and mortality. The esophageal form of the disease leads to achalasia and consequent megaesophagus. In advanced or recurrent cases of megaesophagus, there is no consensus for which of three established techniques-the Serra-Dória procedure, subtotal esophagectomy, or Modified Thal cardioplasty-is best.

Determination of the network structure of sensor materials prepared by three different sol-gel routes using Fourier transform infrared spectroscopy (FT-IR).

Solid acid-base sensor materials were prepared by encapsulating three pH indicators (alizarin red, brilliant yellow, and acridine) within a silica matrix using a sol-gel approach through three different routes: (1) non-hydrolytic, (2) acid-catalyzed, and (3) base-catalyzed. Raman and Fourier transform infrared spectroscopies were used to evaluate the silica-indicator interactions. Because vibrational bands assigned to functional groups present in the indicator molecules were not detected, the main silica stretching mode νSi-O between approximately 1300 and 1000 cm(-1) was used to detect the presence of our indicators within the silica matrix.

Selective silica-based sorbent materials synthesized by molecular imprinting for adsorption of pharmaceuticals in aqueous matrices.

The presence of pharmaceuticals in aqueous environmental matrices often requires efficient and selective preconcentration procedures. Thus, silicas (SILs) were synthesized by a molecular imprinting technique using an acid-catalyzed sol-gel process and the following drugs as templates: fluoxetine, gentamicin, lidocaine, morphine, nifedipine, paracetamol, and tetracycline. The materials were subjected to sorbent extraction assisted by ultrasonic treatment to remove the drugs and the consequent formation of molecular imprinted cavities.

The interaction of encapsulated pharmaceutical drugs with a silica matrix.

A series of seven drugs, namely, fluoxetine, gentamicin, lidocaine, morphine, nifedipine, paracetamol and tetracycline, were encapsulated. The encapsulated systems were characterized using a series of complementary techniques: Fourier-transform infrared spectroscopy (FT-IR), diffusive reflectance spectroscopy in the UV-vis region (DRS) and X-ray photoelectron spectroscopy (XPS). According to the DRS spectra, most of the encapsulated systems showed a band shift of the maximum absorption when compared with the corresponding bare pharmaceutical.

Metal and hydrocarbon behavior in sediments from Brazilian shallow waters drilling activities using nonaqueous drilling fluids (NAFs).

The impact of drilling oil activities in the Brazilian Bonito Field/Campos Basin (Rio de Janeiro) shell drilling (300 m) using nonaqueous fluids (NAFs) was investigated with respect to Al, Fe, Mn, Ba, Co, Pb, Cu, As, Hg, Cr, Ni, Zn, Cd, V, and aliphatic and polynuclear aromatic hydrocarbons concentrations in the sediment. Sampling took place in three different times during approximately 33 months. For the metals Al, As, Co, Cr, Cu, Cd, Fe, Ni, Mn, V, and Zn, no significant variation was observed after drilling activities in most of the stations.

Stabilization and solidification of Pb in cement matrices.

Pb was incorporated to a series of cement matrices, which were submitted to different testes of solidified/stabilized product. The leaching behaviors of aqueous solution were monitored by graphite furnace atomic absorption spectroscopy (GF-AAS). The mechanical strengths were evaluated by unconfined compressive strength (UCS) at 7 and 28 ages.

Combining silica-based adsorbents and SPME fibers in the extraction of the volatiles of beer: an exploratory study.

A series of silica-based materials were employed as sorbents within solid-phase microextraction vials. The aim of the study was to evaluate the effect of an additional phase on the distribution of the volatile and less volatile analytes. The adsorption of six probe molecules, namely isoamyl acetate, ethyl hexanoate (ethyl caproate), phenylethyl alcohol, ethyl octanoate (ethyl caprilate), 2-phenylethyl acetate, and ethyl decanoate, was monitored by detecting the desorbed amount on a DVD-CAR-PDMS fiber from Pilsen beer.

Octadecylsilane-modified silicas in the adsorption of toluene.

A series of octadecylsilane-modified silicas were prepared by sol-gel and grafting methods. Carbon contents and octadecyl chain conformations were shown to depend on the preparative route. Grafting engenders a low carbon content and a liquid-like chain conformation, while the sol-gel method affords a much higher carbon content and a crystalline conformation.

Supported ionic liquid phase rhodium nanoparticle hydrogenation catalysts.

Rh(0) nanoparticles (ca. 4 nm) dispersed in an ionic liquid (1-n-butyl-3-methylimidazolium tetrafluoroborate) were immobilized within a silica network, prepared by the sol-gel method. The effect of the sol-gel catalyst (acid or base) on the encapsulated ionic liquid and Rh(0) content, on the silica morphology and texture, and on the catalyst alkene hydrogenation activity was investigated.