Digital healthcare technologies: Modern tools to transform prosthetic care.

Introduction: Digital healthcare technologies are transforming the face of prosthetic care. Millions of people with limb loss around the world do not have access to any form of rehabilitative healthcare. However, digital technologies provide a promising solution to augment the range and efficiency of prosthetists.

Comparison of different protocols for demineralization of cortical bone.

Bone is a biological composite material consisting of two main components: collagen and mineral. Collagen is the most abundant protein in vertebrates, which makes it of high clinical and scientific interest. In this paper, we compare the composition and structure of cortical bone demineralized using several protocols: ethylene-diamine-tetraacetic acid (EDTA), formic acid (CHO), hydrochloric acid (HCl), and HCl/EDTA mixture.

Radular stylus of Cryptochiton stelleri: A multifunctional lightweight and flexible fiber-reinforced composite.

Chitons are herbivorous invertebrates that use rows of ultrahard magnetite-based teeth connected to a flexible belt (radula) to rasp away algal deposits growing on and within rocky outcrops along coastlines around the world. Each tooth is attached to the radula by an organic structure (stylus) that provides mechanical support during feeding. However, the underlying structures within the stylus, and their subsequent function within the chiton have yet to be investigated.

Mechanical Optimization of Diatomite Monoliths from Freeze Casting for High-Throughput Applications.

The silica cell walls of diatoms, the abundant microalga 1-100 μm in size, show a highly ordered hierarchical porosity and are widely available through their fossilized form known as diatomite. The goal of this research was to use this cost-effective source of porous silica in a unidirectional freezing process called ice-templating, or freeze casting, to create a ceramic membrane with unidirectional lamellar walls of ∼15 μm channels, which allows for an efficient mass transport of fluids (i.e.

Cholla cactus frames as lightweight and torsionally tough biological materials.

Biological materials tested in compression, tension, and impact inspire designs for strong and tough materials, but torsion is a relatively neglected loading mode. The wood skeletons of cholla cacti, subject to spartan desert conditions and hurricane force winds, provide a new template for torsionally resilient biological materials. Novel mesostructural characterization methods of laser-scanning and photogrammetry are used alongside traditional optical microscopy, scanning electron microscopy, and micro-computed tomography to identify mechanisms responsible for torsional resistance.

Multiscale Toughening Mechanisms in Biological Materials and Bioinspired Designs.

Biological materials found in Nature such as nacre and bone are well recognized as light-weight, strong, and tough structural materials. The remarkable toughness and damage tolerance of such biological materials are conferred through hierarchical assembly of their multiscale (i.e.

3D Printed Templating of Extrinsic Freeze-Casting for Macro-Microporous Biomaterials.

As with most biological materials, natural bone has hierarchical structure. The microstructural features of compact bone are of various length scales with its porosity consisting of larger osteons (∼100 μm diameter) and vascular channels, as well as smaller lacuna spaces (∼10 μm diameter). In this study, the freeze-casting process, which has been previously used to form biocompatible porous scaffolds (made with hydroxyapatite, HA) has been improved to mimic the intrinsic hierarchical structure of natural bone by implementing an extrinsic 3D printed template.

A natural energy absorbent polymer composite: The equine hoof wall.

The equine hoof has been considered as an efficient energy absorption layer that protects the skeletal elements from impact when galloping. In the present study, the hierarchical structure of a fresh equine hoof wall and the energy absorption mechanisms are investigated. Tubules are found embedded in the intertubular matrix forming the hoof wall at the microscale.

Deproteinization of Cortical Bone: Effects of Different Treatments.

Bone is a biological composite material having collagen and mineral as its main constituents. In order to better understand the arrangement of the mineral phase in bone, porcine cortical bone was deproteinized using different chemical treatments. This study aims to determine the best method to remove the protein constituent while preserving the mineral component.

Microstructure and mechanical properties of different keratinous horns.

Animal horns play an important role during intraspecific combat. This work investigates the microstructure and mechanical properties of horns from four representative ruminant species: the bighorn sheep (), domestic sheep (), mountain goat () and pronghorn (), aiming to understand the relation between evolved microstructures and mechanical properties. Microstructural similarity is found where disc-shaped keratin cells attach edge-to-edge along the growth direction of the horn core (longitudinal direction) forming a lamella; multiple lamellae are layered face to face along the impact direction (radial direction, perpendicular to horn core growth direction), forming a wavy pattern surrounding a common feature, the tubules.

A comparative analysis of the avian skull: Woodpeckers and chickens.

Woodpeckers peck at trees without any reported brain injury despite undergoing high impact loads. Amongst the adaptations allowing this is a highly functionalized impact-absorption system consisting of the head, beak, tongue and hyoid bone. This study aims to examine the anatomical structure, composition, and mechanical properties of the skull to determine its potential role in energy absorption and dissipation.

Hierarchical structure and compressive deformation mechanisms of bighorn sheep (Ovis canadensis) horn.

Unlabelled: Bighorn sheep (Ovis canadensis) rams hurl themselves at each other at speeds of ∼9 m/s (20 mph) to fight for dominance and mating rights. This necessitates impact resistance and energy absorption mechanisms, which stem from material-structure components in horns. In this study, the material hierarchical structure as well as correlations between the structure and mechanical properties are investigated.

Synergistic structures from magnetic freeze casting with surface magnetized alumina particles and platelets.

Magnetic freeze casting utilizes the freezing of water, a low magnetic field and surface magnetized materials to make multi-axis strengthened porous scaffolds. A much greater magnetic moment was measured for larger magnetized alumina platelets compared with smaller particles, which indicated that more platelet aggregation occurred within slurries. This led to more lamellar wall alignment along the magnetic field direction during magnetic freeze casting at 75 mT.

Stiff, porous scaffolds from magnetized alumina particles aligned by magnetic freeze casting.

Bone consists of a hard mineral phase and a compliant biopolymer phase resulting in a composite material that is both lightweight and strong. Osteoporosis that degrades spongy bone preferentially over time leads to bone brittleness in the elderly. A porous ceramic material that can mimic spongy bone for a one-time implant provides a potential solution for the future needs of an aging population.

Spines of the porcupine fish: Structure, composition, and mechanical properties.

This paper explores the structure, composition, and mechanical properties of porcupine fish spines for the first time. The spine was found to be composed of nanocrystalline hydroxyapatite, protein (collagen), and water using X-ray diffraction, energy-dispersive X-ray spectroscopy, and thermogravimetric analysis. Microstructures have mineralized fibrillar sheets in the longitudinal direction and in a radial orientation in the transverse direction that were observed using light and electron microscopy.

Structure and mechanical implications of the pectoral fin skeleton in the Longnose Skate (Chondrichthyes, Batoidea).

Unlabelled: Animal propulsion systems are believed to show high energy and mechanical efficiency in assisting movement compared to artificial designs. As an example, batoid fishes have very light cartilaginous skeletons that facilitate their elegant swimming via enlarged wing-like pectoral fins. The aim of this work is to illustrate the hierarchical structure of the pectoral fin of a representative batoid, the Longnose Skate (Raja rhina), and explain the mechanical implications of its structural design.

A Sinusoidally Architected Helicoidal Biocomposite.

A fibrous herringbone-modified helicoidal architecture is identified within the exocuticle of an impact-resistant crustacean appendage. This previously unreported composite microstructure, which features highly textured apatite mineral templated by an alpha-chitin matrix, provides enhanced stress redistribution and energy absorption over the traditional helicoidal design under compressive loading. Nanoscale toughening mechanisms are also identified using high-load nanoindentation and in situ transmission electron microscopy picoindentation.

Effect of starch on the mechanical and in vitro properties of collagen-hydroxyapatite sponges for applications in dentistry.

This study sought to improve the mechanical and blood-absorbing properties of collagen sponges, while keeping them compressible, by incorporating blended hydroxyapatite (HA)-starch. Results were compared with CollaPlug(®) (pure collagen). The elastic modulus increased from 1.

A Protocol for Bioinspired Design: A Ground Sampler Based on Sea Urchin Jaws.

Bioinspired design is an emerging field that takes inspiration from nature to develop high-performance materials and devices. The sea urchin mouthpiece, known as the Aristotle's lantern, is a compelling source of bioinspiration with an intricate network of musculature and calcareous teeth that can scrape, cut, chew food and bore holes into rocky substrates. We describe the bioinspiration process as including animal observation, specimen characterization, device fabrication and mechanism bioexploration.

Structural analysis of the tongue and hyoid apparatus in a woodpecker.

Unlabelled: Woodpeckers avoid brain injury while they peck at trees up to 20Hz with speeds up to 7m/s, undergoing decelerations up to 1200g. Along with the head, beak and neck, the hyoid apparatus (tongue bone and associated soft tissues) is subjected to these high impact forces. The shape of the hyoid apparatus is unusual in woodpeckers and its structure and mechanical properties have not been reported in detail.

Reproducibility of ZrO2-based freeze casting for biomaterials.

The processing technique of freeze casting has been intensely researched for its potential to create porous scaffold and infiltrated composite materials for biomedical implants and structural materials. However, in order for this technique to be employed medically or commercially, it must be able to reliably produce materials in great quantities with similar microstructures and properties. Here we investigate the reproducibility of the freeze casting process by independently fabricating three sets of eight ZrO2-epoxy composite scaffolds with the same processing conditions but varying solid loading (10, 15 and 20 vol.

Structure and mechanical properties of selected protective systems in marine organisms.

Marine organisms have developed a wide variety of protective strategies to thrive in their native environments. These biological materials, although formed from simple biopolymer and biomineral constituents, take on many intricate and effective designs. The specific environmental conditions that shape all marine organisms have helped modify these materials into their current forms: complete hydration, and variation in hydrostatic pressure, temperature, salinity, as well as motion from currents and swells.

Structural Design Elements in Biological Materials: Application to Bioinspiration.

Eight structural elements in biological materials are identified as the most common amongst a variety of animal taxa. These are proposed as a new paradigm in the field of biological materials science as they can serve as a toolbox for rationalizing the complex mechanical behavior of structural biological materials and for systematizing the development of bioinspired designs for structural applications. They are employed to improve the mechanical properties, namely strength, wear resistance, stiffness, flexibility, fracture toughness, and energy absorption of different biological materials for a variety of functions (e.

BIOMECHANICS. Why the seahorse tail is square.

Whereas the predominant shapes of most animal tails are cylindrical, seahorse tails are square prisms. Seahorses use their tails as flexible grasping appendages, in spite of a rigid bony armor that fully encases their bodies. We explore the mechanics of two three-dimensional-printed models that mimic either the natural (square prism) or hypothetical (cylindrical) architecture of a seahorse tail to uncover whether or not the square geometry provides any functional advantages.

Experimentally-based multiscale model of the elastic moduli of bovine trabecular bone and its constituents.

The elastic moduli of trabecular bone were modeled using an analytical multiscale approach. Trabecular bone was represented as a porous nanocomposite material with a hierarchical structure spanning from the collagen-mineral level to the trabecular architecture level. In parallel, compression testing was done on bovine femoral trabecular bone samples in two anatomical directions, parallel to the femoral neck axis and perpendicular to it, and the measured elastic moduli were compared with the corresponding theoretical results.