Mesopore-Augmented Electrochemical CO Reduction on Nitrogen-Doped Carbon.

The electrochemical carbon dioxide reduction reaction (eCORR) using nitrogen-doped carbon (N-C) materials offers a promising and cost-effective approach to global carbon neutrality. Regulating the porosity of N-C materials can potentially increase the catalytic performance by suppressing the concurrence of the hydrogen evolution reaction (HER). However, the augmentation of porosity usually alters the active sites or the chemical composition of catalysts, resulting in intertwined influences of various structural factors and catalytic performance.

Sparkling Synergy: Enhancing Hydrogen Evolution with a Mesoporous CoP/FeP Interface.

The reaction kinetics is predominantly determined by the surface and interface engineering of electrocatalysts. Herein, we demonstrate the growth of cobalt monophosphide and iron monophosphide (CoP/FeP) with an effective solid interface. The surface of CoP/FeP is mesoporous, which is obtained by phosphidizing mesoporous CoFeO.

Direct Operando Visualization of Metal Support Interactions Induced by Hydrogen Spillover During CO Hydrogenation.

The understanding of catalyst active sites is a fundamental challenge for the future rational design of optimized and bespoke catalysts. For instance, the partial reduction of Ce surface sites to Ce and the formation of oxygen vacancies are critical for CO hydrogenation, CO oxidation, and the water gas shift reaction. Furthermore, metal nanoparticles, the reducible support, and metal support interactions are prone to evolve under reaction conditions; therefore a catalyst structure must be characterized under operando conditions to identify active states and deduce structure-activity relationships.

Cobalt-Iron Oxyhydroxide Obtained from the Metal Phosphide: A Highly Effective Electrocatalyst for the Oxygen Evolution Reaction at High Current Densities.

The development of high current density anodes for the oxygen evolution reaction (OER) is fundamental to manufacturing practical and reliable electrochemical cells. In this work, we have developed a bimetallic electrocatalyst based on cobalt-iron oxyhydroxide that shows outstanding performance for water oxidation. Such a catalyst is obtained from cobalt-iron phosphide nanorods that serve as sacrificial structures for the formation of a bimetallic oxyhydroxide through phosphorous loss concomitantly to oxygen/hydroxide incorporation.

Hydrothermal Fabrication of Carbon-Supported Oxide-Derived Copper Heterostructures: A Robust Catalyst System for Enhanced Electro-Reduction of CO to C H.

Anthropogenic CO can be converted to alternative fuels and value-added products by electrocatalytic routes. Copper-based catalysts are found to be the star materials for obtaining longer-chain carbon compounds beyond 2e products. Herein, we report a facile hydrothermal fabrication of a highly robust electrocatalyst: in-situ grown heterostructures of plate-like CuO-Cu O on carbon black.

Improvement of carbon dioxide electroreduction by crystal surface modification of ZIF-8.

Metal-organic frameworks (MOFs) possess high CO adsorption properties and are considered to be a promising candidate for the electrochemical carbon dioxide reduction reaction (eCORR). However, their insufficient selectivity and current density constrain their further exploration in the eCORR. In this work, by introducing a very small proportion of 2,5-dihydroxyterephthalic acid (DOBDC) into ZIF-8, a surface modified ZIF-8-5% catalyst was synthesized by a post-modification method, exhibiting enhanced selectivity (from 56% to 79%) and current density (from -4 mA cm to -10 mA m) compared to ZIF-8.

CuO-Cu@Titanium Surface with Synergistic Performance for Nitrate-to-Ammonia Electrochemical Reduction.

Transition metals, such as titanium (Ti) and copper (Cu) along with their respective metal oxides (TiO, CuO, and CuO), have been widely studied as electrocatalysts for nitrate electrochemical reduction with important outcomes in the fields of denitrification and ammonia generation. Based on this, this work conducted an evaluation of a composite electrode that integrates materials with different intrinsic activities (i.e.

Spin Effect to Promote Reaction Kinetics and Overall Performance of Lithium-Sulfur Batteries under External Magnetic Field.

Lithium-sulfur batteries (LSBs) are still limited by the shuttle of lithium polysulfides (LiPS) and the slow Li-S reaction. Herein, we demonstrate that when using cobalt sulfide as a catalytic additive, an external magnetic field generated by a permanent magnet can significantly improve the LiPS adsorption ability and the Li-S reaction kinetics. More specifically, the results show both experimentally and theoretically how an electron spin polarization of Co ions reduces electron repulsion and enhances the degree of orbital hybridization, thus resulting in LSBs with unprecedented performance and stability.

Engineering the Interfacial Microenvironment via Surface Hydroxylation to Realize the Global Optimization of Electrochemical CO Reduction.

The adsorption and activation of CO on the electrode interface is a prerequisite and key step for electrocatalytic CO reduction reaction (eCO RR). Regulating the interfacial microenvironment to promote the adsorption and activation of CO is thus of great significance to optimize overall conversion efficiency. Herein, a CO-philic hydroxyl coordinated ZnO (ZnO-OH) catalyst is fabricated, for the first time, via a facile MOF-assisted method.

Phase Engineering of Defective Copper Selenide toward Robust Lithium-Sulfur Batteries.

The shuttling of soluble lithium polysulfides (LiPS) and the sluggish Li-S conversion kinetics are two main barriers toward the practical application of lithium-sulfur batteries (LSBs). Herein, we propose the addition of copper selenide nanoparticles at the cathode to trap LiPS and accelerate the Li-S reaction kinetics. Using both computational and experimental results, we demonstrate the crystal phase and concentration of copper vacancies to control the electronic structure of the copper selenide, its affinity toward LiPS chemisorption, and its electrical conductivity.

A High Conductivity 1D π-d Conjugated Metal-Organic Framework with Efficient Polysulfide Trapping-Diffusion-Catalysis in Lithium-Sulfur Batteries.

The shuttling behavior and sluggish conversion kinetics of the intermediate lithium polysulfides (LiPS) represent the main obstructions to the practical application of lithium-sulfur batteries (LSBs). Herein, a 1D π-d conjugated metal-organic framework (MOF), Ni-MOF-1D, is presented as an efficient sulfur host to overcome these limitations. Experimental results and density functional theory calculations demonstrate that Ni-MOF-1D is characterized by a remarkable binding strength for trapping soluble LiPS species.

High performance silicon electrode enabled by titanicone coating.

This paper presents the electrochemical performance and characterization of nano Si electrodes coated with titanicone (TiGL) as an anode for Li ion batteries (LIBs). Atomic layer deposition (ALD) of the metal combined with the molecular layer deposition (MLD) of the organic precursor is used to prepare coated electrodes at different temperatures with improved performance compared to the uncoated Si electrode. Coated electrodes prepared at 150 °C deliver the highest capacity and best current response of 1800 mAh g at 0.

Contact resistance stability and cation mixing in a Vulcan-based LiNiCoMnO slurry for semi-solid flow batteries.

The Semi-Solid Flow Battery (SSFB) is an interesting energy storage system (ESS) for stationary applications but, in spite of the significant work presented on this technology so far, understanding the chemical and physical factors limiting its electrochemical performance is still blurred by measurements under static conditions rather than under real operando conditions. In this study, we have used Vulcan carbon as a conductive additive to formulate LiNi1/3Co1/3Mn1/3O2 (NCM) based slurries as the catholyte to characterize electrical and electrochemical performances using a 3-electrode flow cell by electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge (GCD), respectively. The results are correlated with post-mortem analyses of recovered slurries using Scanning Electron Microscopy (SEM), Raman spectroscopy and Rietveld refinement of the NCM crystal structure.

Facing Seawater Splitting Challenges by Regeneration with Ni-Mo-Fe Bifunctional Electrocatalyst for Hydrogen and Oxygen Evolution.

Hydrogen, produced by water splitting, has been proposed as one of the main green energy vectors of the future if produced from renewable energy sources. However, to substitute fossil fuels, large amounts of pure water are necessary, scarce in many world regions. In this work, we fabricate efficient and earth-abundant electrodes, study the challenges of using real seawater, and propose an electrode regeneration method to face undesired salt deposition.

ZnSe/N-Doped Carbon Nanoreactor with Multiple Adsorption Sites for Stable Lithium-Sulfur Batteries.

To commercially realize the enormous potential of lithium-sulfur batteries (LSBs) several challenges remain to be overcome. At the cathode, the lithium polysulfide (LiPS) shuttle effect must be inhibited and the redox reaction kinetics need to be substantially promoted. In this direction, this work proposes a cathode material based on a transition-metal selenide (TMSe) as both adsorber and catalyst and a hollow nanoreactor architecture: ZnSe/N-doped hollow carbon (ZnSe/NHC).

Engineering grain boundaries at the 2D limit for the hydrogen evolution reaction.

Atom-thin transition metal dichalcogenides (TMDs) have emerged as fascinating materials and key structures for electrocatalysis. So far, their edges, dopant heteroatoms and defects have been intensively explored as active sites for the hydrogen evolution reaction (HER) to split water. However, grain boundaries (GBs), a key type of defects in TMDs, have been overlooked due to their low density and large structural variations.

Gas sensing properties of individual SnO nanowires and SnO sol-gel nanocomposites.

This work is an investigation of the properties of semiconductor materials based on metal oxides, their catalytic properties, and their application as gas sensors, which were shown to exhibit high sensitivity, stability, and selectivity to target gases. The aim of this work is the comparison of gas sensing properties of tin dioxide in the form of individual nanowires and nanopowders obtained by sol-gel synthesis. This comparison is necessary because the traditional synthesis procedures of small particle, metal oxide materials seem to be approaching their limit.

Insight into the Degradation Mechanisms of Atomic Layer Deposited TiO as Photoanode Protective Layer.

Around 100 nm thick TiO layers deposited by atomic layer deposition (ALD) have been investigated as anticorrosion protective films for silicon-based photoanodes decorated with 5 nm NiFe catalyst in highly alkaline electrolyte. Completely amorphous layers presented high resistivity; meanwhile, the ones synthesized at 300 °C, having a fully anatase crystalline TiO structure, introduced insignificant resistance, showing direct correlation between crystallization degree and electrical conductivity. The conductivity through crystalline TiO layers has been found not to be homogeneous, presenting preferential conduction paths attributed to grain boundaries and defects within the crystalline structure.

Analysis of the interfacial characteristics of BiVO/metal oxide heterostructures and its implication on their junction properties.

The formation of heterostructures has proven to be a viable way to achieve high photoelectrochemical water splitting efficiencies with BiVO4 based photoanodes. Especially, cobalt and nickel based oxides are suitable low cost contact materials. However, the exact role of these contact materials is not yet completely understood because of the difficulty to individually quantify the effects of surface passivation, charge carrier separation and catalysis on the efficiency of a heterostructure.

Multilayered Hematite Nanowires with Thin-Film Silicon Photovoltaics in an All-Earth-Abundant Hybrid Tandem Device for Solar Water Splitting.

The concept of hybrid tandem device structures that combine metal oxides with thin-film semiconducting photoabsorbers holds great promise for large-scale, robust, and cost-effective bias-free photoelectrochemical water splitting (PEC-WS). This work highlights important steps toward the efficient coupling of high-performance hematite photoanodes with multijunction thin-film silicon photocathodes providing high bias-free photocurrent density. The hybrid PEC-WS device is optimized by testing three types of multijunction silicon photocathodes with the hematite photoanode: amorphous silicon (a-Si:H) tandem: a-Si:H/a-Si:H and triple junction with microcrystalline silicon (μc-Si:H): a-Si:H/a-Si:H/μc-Si:H and a-Si:H/μc-Si:H/μc-Si:H.

Tailoring Copper Foam with Silver Dendrite Catalysts for Highly Selective Carbon Dioxide Conversion into Carbon Monoxide.

The present study outlines the important steps to bring electrochemical conversion of carbon dioxide (CO) closer to commercial viability by using a large-scale metallic foam electrode as a highly conductive catalyst scaffold. Because of its versatility, it was possible to specifically tailor three-dimensional copper foam through coating with silver dendrite catalysts by electrodeposition. The requirements of high-yield CO conversion to carbon monoxide (CO) were met by tuning the deposition parameters toward a homogeneous coverage of the copper foam with nanosized dendrites, which additionally featured crystallographic surface orientations favoring CO production.

Turning Earth Abundant Kesterite-Based Solar Cells Into Efficient Protected Water-Splitting Photocathodes.

CZTS/Se kesterite-based solar cells have been protected by conformal atomic layer deposition (ALD)-deposited TiO demonstrating its feasibility as powerful photocathodes for water splitting in highly acidic conditions (pH < 1), achieving stability with no detected degradation and with current density levels similar to photovoltaic productivities. The ALD has allowed low deposition temperatures of 200 °C for TiO, preventing significant variations to the kesterite structure and CdS heterojunction, except for the pure-sulfide stoichiometry, which was studied by Raman spectroscopy. The measured photocurrent at 0 V vs reversible hydrogen electrode, 37 mA·cm, is the highest reported to date, and the associated half-cell solar-to-hydrogen efficiency reached 7%, being amongst the largest presented for kesterite-based photocathodes, corroborating the possibility of using them as abundant low-cost alternative photoabsorbers as their efficiencies are improved toward those of chalcopyrites.

Insights into the Performance of CoNiTiO Solid Solutions as Photocatalysts for Sun-Driven Water Oxidation.

CoNiTiO systems evaluated as photo- and electrocatalytic materials for oxygen evolution reaction (OER) from water have been studied. These materials have shown promising properties for this half-reaction both under (unbiased) visible-light photocatalytic approach in the presence of an electron scavenger and as electrocatalysts in dark conditions in basic media. In both situations, CoNiTiO exhibits the best performance and is proved to display high faradaic efficiency.

Charge Transfer Characterization of ALD-Grown TiO Protective Layers in Silicon Photocathodes.

A critical parameter for the implementation of standard high-efficiency photovoltaic absorber materials for photoelectrochemical water splitting is its proper protection from chemical corrosion while remaining transparent and highly conductive. Atomic layer deposited (ALD) TiO layers fulfill material requirements while conformally protecting the underlying photoabsorber. Nanoscale conductivity of ALD TiO protective layers on silicon-based photocathodes has been analyzed, proving that the conduction path is through the columnar crystalline structure of TiO.

Hydrogen-Treated Rutile TiO Shell in Graphite-Core Structure as a Negative Electrode for High-Performance Vanadium Redox Flow Batteries.

Hydrogen-treated TiO as an electrocatalyst has shown to boost the capacity of high-performance all-vanadium redox flow batteries (VRFBs) as a simple and eco-friendly strategy. The graphite felt-based GF@TiO :H electrode is able to inhibit the hydrogen evolution reaction (HER), which is a critical barrier for operating at high rate for long-term cycling in VRFBs. Significant improvements in charge/discharge and electron-transfer processes for the V /V reaction on the surface of reduced TiO were achieved as a consequence of the formation of oxygen functional groups and oxygen vacancies in the lattice structure.