Comprehensive transcriptome, physiological and biochemical analyses reveal that key role of transcription factor WRKY and plant hormone in responding cadmium stress.

Cadmium (Cd) is readily absorbed by tobacco and accumulates in the human body through smoke inhalation, posing threat to human health. While there have been many studies on the negative impact of cadmium in tobacco on human health, the specific adaptive mechanism of tobacco roots to cadmium stress is not well understood. In order to comprehensively investigate the effects of Cd stress on the root system of tobacco, the combination of transcriptomic, biochemical, and physiological methods was utilized.

Identification and Composition of Cyanobacteria in Ecuadorian Shrimp Farming Ponds-Possible Risk to Human Health.

Toxic cyanobacterial blooms in various water bodies have been given much attention nowadays as they release hazardous substances in the surrounding areas. These toxic planktonic cyanobacteria in shrimp ponds greatly affect the survival of shrimps. Ecuador is the second highest shrimp producing country in the Americas after Brazil; and the shrimp-based economy is under threat due to toxic cyanobacterial blooms in Ecuador shrimp ponds.

Variety-dependent responses of common tobacco with differential cadmium resistance: Cadmium uptake and distribution, antioxidative activity, and gene expression.

Cadmium (Cd), which accumulates in tobacco leaves, enters the human body through inhalation of smoke, causing harmful effects on health. Therefore, identifying the pivotal factors that govern the absorption and resistance of Cd in tobacco is crucial for mitigating the harmful impact of Cd. In the present study, four different Cd-sensitive varieties, namely, ZhongChuan208 (ZC) with resistance, ZhongYan100 (ZY), K326 with moderate resistance, and YunYan87 (YY) with sensitivity, were cultivated in hydroponic with different Cd concentrations (20 µM, 40 µM, 60 µM and 80 µM).

Adsorption dynamics of Cd(aq) on microwave-synthetized pristine biochar from cocoa pod husk: Green, experimental, and DFT approaches.

Biochar obtained via microwave-assisted pyrolysis (MAP) at 720 W and 15 min from cocoa pod husk (CPH) is an efficient adsorbent of Cd(aq). Biochar of residual biomass of CPH (BCCPH) possesses favorable physicochemical and morphological properties, featuring a modest surface area yet a suitable porous structure. Adsorption, predominantly governed by physisorption, is influenced by the oxygen-containing active sites (-COOR, -C(R)O, and -CHOR; R = H, alkyl).

Development of hybrid MIL-53(Al)@CBS for ternary adsorption of tetracyclines antibiotics in water: Physical interpretation of the adsorption mechanism.

In this study, a hybrid material, MIL-53(Al)@CBS, was synthesized via the solvothermal method, involving the growth of MIL-53(Al) crystals on cocoa bean shell residues (CBS). Physicochemical characterization techniques, including TGA, BET, FTIR, XRD, and SEM, confirmed successful hybridization. MIL-53(Al)@CBS was employed as an adsorbent for antibiotics (oxytetracycline, tetracycline, chlortetracycline) separation from aqueous solutions.

Imidazolate framework material for crude oil removal in aqueus media: Mechanism insight.

Considerable amount of produced water discharged by the oil industry contributes to an environmental imbalance due to the presence of several components potentially harmful to the ecosystem. We investigated the factors influencing the adsorption capacity of Zinc Imidazolate Framework-8 (ZIF-8) in finite bath systems for crude oil removal from petroleum extraction in synthetic produced water. ZIF-8, experimentally obtained by solvothermal method, was characterized by XRD, FTIR, TGA, BET and its point of zero charge (pH) was determined.

MIL-53(Al)@HC nanohybrid for bicomponent adsorption of ibuprofen and metsulfuron-methyl: Application of macro- and microscopic models and competition between contaminants.

In this work, a hybrid was synthesized by hydrothermal treatment, metal-organic framework functionalized with hydrochar (MIL-53(Al)@HC) for the adsorption of two organic molecules Ibuprofen sodium salt and Metsulfuron-methyl, in binary system. The hybrid is composed of 71 wt% biomass and 29 wt% MOF. TGA, BET, FTIR, XRD and XPS characterization techniques were used to verify the hybridization of MIL-53(Al)@HC.

Microplastics as vectors of other contaminants: Analytical determination techniques and remediation methods.

The ubiquitous and persistent presence of microplastics (MPs) in aquatic and terrestrial ecosystems has raised global concerns due to their detrimental effects on human health and the natural environment. These minuscule plastic fragments not only threaten biodiversity but also serve as vectors for contaminants, absorbing organic and inorganic pollutants, thereby causing a range of health and environmental issues. This review provides an overview of microplastics and their effects.

Silica-derived materials from agro-industrial waste biomass: Characterization and comparative studies.

The management and final disposal of agro-industrial wastes are one of the main environmental problems. Due to the presence of silica in some agricultural by-products, it is possible to convert waste into materials with advanced properties. This contribution was aimed to extract and characterize silica materials from various feedstocks including sugarcane bagasse (SCB), corn stalk (CS), and rice husk (RH).

Efficient microbial cellulose/FeO nanocomposite for photocatalytic degradation by advanced oxidation process of textile dyes.

Fenton-type advanced oxidative processes (AOP) have been employed to treat textile dyes in aqueous solution and industrial effluent. The work focused on assisting the limitations still presented by the Fenton process regarding the use of suspended iron catalysts. Soon, a nanocomposite of bacterial cellulose (BC) and magnetite (FeO) was developed.

Application of a novel hybrid MIL-53(Al)@rice husk for the adsorption of glyphosate in water: Characteristics and mechanism of the process.

The development of new materials that have a high capacity to remove pollutants in water-based media is becoming increasingly important because of the serious contamination of water and the negative impact on biodiversity and public health. The presence of glyphosate in water, the most widely used herbicide worldwide, has triggered alerts owing to the collateral effects it may cause on human health. The main objective of the present study was to investigate the potential of the hybrid material MIL-53(Al)@RH for the adsorption of glyphosate in aqueous solution.

Original nanostructured bacterial cellulose/pyrite composite: Photocatalytic application in advanced oxidation processes.

The development of an original catalytic composite of bacterial cellulose (BC) and pyrite (FeS) for environmental application was the objective of this study. Nanoparticles of the FeS were synthesized from the hydrothermal method and immobilized on the BC structure using ex situ methodology. In the BC, the FTIR and XRD analyzes showed the absorption band associated with the Fe-S bond and crystalline peaks attributed to the pyrite.

Microwave-assisted MOF@biomass layered nanomaterials: Characterization and applications in wastewater treatment.

MOF@Biomass layered hybrids were designed through in situ growth from rice husk (RH) and microwave-assisted synthesized MIL-53(Al) particles that enable the reduction of reaction times. The synthesis process included steps to pretreat RH, Al adsorption on RH, and then MIL-53(Al) in-situ growth reaction at 125 °C for 60 min and 200 W irradiation power. The resulting hybrid (MIL-53(Al)@RH) and its parent separate materials were characterized using TGA, SEM, FTIR, XRD, among others.

Recent advances in the remediation of perfluoroalkylated and polyfluoroalkylated contaminated sites.

Per- and polyfluoroalkyl substances (PFASs) are compounds used since 1940 in various formulations in the industrial and consumer sectors due to their high chemical and thermal stability. In recent years, PFASs have caused global concern due to their presence in different water and soil matrices, which threatens the environment and human health. These compounds have been reported to be linked to the development of serious human diseases, including but not limited to cancer.

Polymeric membranes functionalized with nanomaterials (MP@NMs): A review of advances in pesticide removal.

The excessive contamination of drinking water sources by pesticides has a pernicious impact on human health and the environment since only 0.1% of pesticides is utilized effectively to control the and the rest is deposited in the environment. Filtration by polymeric membranes has become a promising technique to deal with this problem; however, the scientific community, in the need to find better pesticide retention results, has begun to meddle in the functionalization of polymeric membranes.

Development of an inexpensive and rapidly preparable enzymatic pencil graphite biosensor for monitoring of glyphosate in waters.

Glyphosate (GLY) is the most widely used non-selective broad-spectrum herbicide worldwide under well-reported side effects on the environment and human health. That's why it's necessary to control its presence in the environment. This work describes the development of an affordable, simple, and accurate electrochemical biosensor using a pencil graphite electrode as support, a horseradish peroxidase enzyme immobilized on a polysulfone membrane doped with multi-walled carbon nanotubes.

MOF@biomass hybrids: Trends on advanced functional materials for adsorption.

This contribution aims to demonstrate the scope of new hybrids between biomass and metal-organic frameworks (MOF@biomass) used in the adsorption process of pollutants. After a brief presentation of the use of the main series of MOFs as efficient adsorbents for different types of pollutants, the limitations of these structures related to particle size and hydrodynamic problems during their application are highlighted. Lignocellulosic biomasses are also recognized as an alternative adsorbent, mainly due to their high natural abundance and their low environmental impact during and after their application.

Removal of Contaminants from Water by Membrane Filtration: A Review.

Drinking water sources are increasingly subject to various types of contamination due to anthropogenic factors and require proper treatment to remove disease-causing agents. Public drinking water systems use different treatment methods to provide safe and quality drinking water to populations. However, they are ineffective in removing contaminants that are considered a danger to the environment and therefore to humans.

Contaminants in the cow's milk we consume? Pasteurization and other technologies in the elimination of contaminants.

Cow's milk is currently the most consumed product worldwide. However, due to various direct and indirect contamination sources, different chemical and microbiological contaminants have been found in cow's milk. This review details the main contaminants found in cow's milk, referring to the sources of contamination and their impact on human health.

Pharmaceutical compounds used in the COVID-19 pandemic: A review of their presence in water and treatment techniques for their elimination.

During the COVID-19 pandemic, high consumption of antivirals, antibiotics, antiparasitics, antiprotozoals, and glucocorticoids used in the treatment of this virus has been reported. Conventional treatment systems fail to efficiently remove these contaminants from water, becoming an emerging concern from the environmental field. Therefore, the objective of the present work is to address the current state of the literature on the presence and removal processes of these drugs from water bodies.

Degradation of the residual textile mixture cetyltrimethylammonium bromide/remazol yellow gold RNL-150%/reactive blue BF-5G: evaluation photo-peroxidation and photo-Fenton processes in LED and UV-C photoreactors.

This article presents a study on the degradation of a residual textile mixture composed of cationic surfactant cetyltrimethylammonium bromide (CTAB) and the remazol yellow gold RNL-150% and reactive blue BF-5G textile dyes. This was carried out by employing the photo-peroxidation and photo-Fenton processes in LED and UV-C photoreactors. The photo-Fenton process was the most efficient as regards the degradation of the CTAB and dye mixture, for both types of radiation.

Challenges in the design of electrochemical sensor for glyphosate-based on new materials and biological recognition.

Glyphosate (GLY) is the main ingredient in the weed killer Roundup and the most widely used pesticide in the world. Studies of the harmful effects of GLY on human health began to become more wide-ranging after 2015. GLY is listed by the International Agency for Research on Cancer (IARC) as a carcinogenic hazard to humans.

Investigation of paracetamol degradation using LED and UV-C photo-reactors.

This work investigates the efficiency of LED and UV-C photo-reactors for paracetamol degradation using advanced oxidative processes. Among the evaluated processes, photo-Fenton was the most efficient for both radiations. Degradations greater than 81% (λ 197 nm) and 91% (λ 243 nm) were obtained in the kinetic study.