Compact, diode-pumped, unstable cavity Yb:YAG laser and its application in laser shock peening.

We present the setup of a compact, q-switched, cryogenically cooled Yb:YAG laser, which is capable of producing over 1 J output energy in a 10 ns pulse at 10 Hz. The system's design is based on the recently published unstable cavity layout with gain shaping of the spatial intra-cavity intensity distribution. Using a hexagonal homogenized pump beam, the laser generated an according hexagonal output beam profile.

Few-cycle fs-pumped NOPA with passive ultrabroadband spectral shaping.

A compact, femtosecond-pumped noncollinear optical parametric amplifier (NOPA) is presented with a passive spectral shaping technique, employed to produce a flat-top-like ultrabroadband output spectrum. The NOPA is pumped by a dedicated 2 mJ, 120 fs Yb-based CPA system, which generates both the second harmonic pump pulse and white light supercontinuum as the signal pulse. A chirped mirror pair pre-compensates the material GVD within the optical path of the signal pulse to produce a near-FTL pulse duration at the OPA crystal output.

[How frequently are depressive disorders recognized in primary care patients? : A cross-sectional epidemiological study in Germany].

Background: Primary care physicians (PCPs) play a crucial role for guideline-oriented intervention in patients with depression.

Objectives: Based on a diagnostic screening questionnaire, this study investigates the sensitivity of PCPs to recognize patients with depression as well as the factors facilitating recognition and concordant diagnostic decisions.

Method: In a cross-sectional epidemiological study in six regions of Germany, 3563 unselected patients filled in questionnaires on mental and physical complaints and were diagnostically evaluated by their PCP (N = 253).

Intracavity stretcher for chirped-pulse amplification in high-power laser systems.

We present pulse stretching with an intracavity Offner-type pulse stretcher applied to a high-energy, short-pulse laser system. The compact intracavity design, offering a tunable stretching factor, allows the pulses to be stretched to several nanoseconds and, at the same time, to be amplified to 100 μJ. The stretched pulses have been further amplified with the high-power laser system Polaris and have been recompressed to durations as short as 102 fs, reaching peak powers of 100 TW.

Tunable filters for precise spectral gain control in ultra-short-pulse laser systems.

We present tunable spectral filters (TSFs) as a variable and precisely adjustable method to control the spectral gain of short-pulse laser systems. The TSFs provide a small residual spectral phase and a high damage threshold, and generate no pre- or post-pulses. The method is demonstrated for two different laser materials and can be applied as an intracavity compensation in regenerative amplifiers as well as a method for pre-compensation in high-energy multipass amplifiers.

54 J pulses with 18 nm bandwidth from a diode-pumped chirped-pulse amplification laser system.

We report on results from the fully diode-pumped chirped-pulse amplification laser system Polaris. Pulses were amplified to a maximum energy of 54.2 J before compression.

High contrast, 86 fs, 35 mJ pulses from a diode-pumped, Yb:glass, double-chirped-pulse amplification laser system.

We demonstrate the generation of 86 fs, 35 mJ, high-contrast laser pulses at 1030 nm with a repetition rate of 1 Hz from a diode-pumped double chirped-pulse amplification setup. The pulses exhibit a spectral bandwidth exceeding 27 nm full width at half-maximum. This could be achieved by using a laser architecture comprising two stages of chirped pulse amplification with a cross-polarized wave generation filter in between, by applying spectral shaping and by increasing the spectral hard-clip of the second stretcher.

Spatially and temporally resolved temperature measurement in laser media.

A technique to measure the spatially resolved temperature distribution in a laser medium is presented. It is based on the temperature dependence of the absorption cross section close to the zero-phonon line of the active medium. Since other materials in the beam path exhibit a high (and constant) transmission at this wavelength, the method can easily be applied in realistic amplifier setups.

The generation of amplified spontaneous emission in high-power CPA laser systems.

An analytical model is presented describing the temporal intensity contrast determined by amplified spontaneous emission in high-intensity laser systems which are based on the principle of chirped pulse amplification. The model describes both the generation and the amplification of the amplified spontaneous emission for each type of laser amplifier. This model is applied to different solid state laser materials which can support the amplification of pulse durations ≤350 fs .

Ultra-high contrast frontend for high peak power fs-lasers at 1030 nm.

We present the results from a new frontend within a double-chirped pulse amplification architecture (DCPA) utilizing crossed-polarized wave generation (XPW) for generating ultra-high contrast, 150 μJ-level, femtosecond seed pulses at 1030 nm. These pulses are used in the high energy class diode-pumped laser system Polaris at the Helmholtz Institute in Jena. Within this frontend, laser pulses from a 75 MHz oscillator-pulse train are extracted at a repetition rate of 1 Hz, temporally stretched, amplified and then recompressed reaching a pulse energy of 2 mJ, a bandwidth of 12 nm and 112 fs pulse duration at a center wavelength of 1030 nm.

16.6 J chirped femtosecond laser pulses from a diode-pumped Yb:CaF2 amplifier.

We report the amplification of laser pulses at a center wavelength of 1034 nm to an energy of 16.6 J from a fully diode-pumped amplifier using Yb:CaF2 as the active medium. Pumped by a total optical power of 300 kW from high-power laser diodes, a gain factor of g=6.

Efficient burst mode amplifier for ultra-short pulses based on cryogenically cooled Yb³⁺:CaF₂.

We present a novel approach for the amplification of high peak power femtosecond laser pulses at a high repetition rate. This approach is based on an all-diode pumped burst mode laser scheme. In this scheme, pulse bursts with a total duration between 1 and 2 ms are be generated and amplified.

Temperature dependent emission and absorption cross section of Yb3+ doped yttrium lanthanum oxide (YLO) ceramic and its application in diode pumped amplifier.

Temperature dependent absorption and emission cross-sections of 5 at% Yb(3+) doped yttrium lanthanum oxide (Yb:YLO) ceramic between 80K and 300 K are presented. In addition, we report on the first demonstration of ns pulse amplification in Yb:YLO ceramic. A pulse energy of 102 mJ was extracted from a multi-pass amplifier setup.

High-intensity, high-contrast laser pulses generated from the fully diode-pumped Yb:glass laser system POLARIS.

We report on the first generation of high-contrast, 164 fs duration pulses from the laser system POLARIS reaching focused peak intensities in excess of 2×10(20) W/cm2. To our knowledge, this is the highest peak intensity reported so far that has been achieved with a diode-pumped, solid-state laser. Several passive contrast enhancement techniques have been specially developed and implemented, achieving a relative prepulse intensity smaller than 10(-8) at t=-30 ps before the main pulse.

Spectrally resolved and phase-sensitive far-field measurement for the coherent addition of laser pulses in a tiled grating compressor.

We describe a method that can be used for the coherent addition of laser pulses. As different laser pulses are initially generated in a laser-pulse compressor equipped with a tiled grating, such a coherent addition is indispensable in order to maximize the intensity in the laser far field. We present measurements in this context where, up to now, an unavoidable difference in the grating constants between the phased gratings reduced the maximum achievable intensity.

Terawatt diode-pumped Yb:CaF2 laser.

We present what we believe to be the first terawatt diode-pumped laser employing single-crystalline Yb:CaF(2) as the amplifying medium. A maximum pulse energy of 420 mJ at a repetition rate of 1 Hz was achieved by seeding with a stretched femtosecond pulse 2 ns in duration, preamplified to 40 mJ. After recompression, a pulse energy of 197 mJ and a duration of 192 fs were obtained, corresponding to a peak power of 1 TW.

Generation of 220 mJ nanosecond pulses at a 10 Hz repetition rate with excellent beam quality in a diode-pumped Yb:YAG MOPA system.

A novel all-diode-pumped master oscillator power amplifier system based on Yb:YAG crystal rods has been developed. It consists of a Q-switched oscillator delivering 3 mJ, 6.4 ns pulses at a 10 Hz repetition rate and an additional four-pass amplifier, which boosts the output energy to 220 mJ, while a close to TEM(00) beam quality could be observed.

Alignment of a tiled-grating compressor in a high-power chirped-pulse amplification laser system.

We present a novel technique to align a tiled grating in all five relevant degrees of freedom utilized in the compressor of the high-power chirped-pulse amplification laser system POLARIS at the Institute for Optics and Quantum Electronics, Jena, Germany. With this technique, alignment errors of the two gratings with respect to each other can be detected with an accuracy of 1 microrad for the rotational and 40 nm for the translational degrees of freedom. This is well sufficient to recompress 1030 nm pulses, which were stretched to 2.

High-peak-power tunable laser operation of Yb:SrF2.

Growth, spectroscopic properties, and laser performance of Yb:SrF(2) crystals have been investigated. In spatial multimode operation of a diode-pumped Yb:SrF(2) laser a slope efficiency of 46% was measured. 180W output power with high beam quality at a pulse duration of 1.

In situ characterization of semiconductor saturable absorber mirrors in an operating Yb:KGW mode-locked laser.

We report in situ characterization of a semiconductor saturable absorber mirror (SESAM) in an operating Yb:KGW mode-locked laser. The technique may be described as a pump-probe experiment in which the intracavity beam acts as a pump beam while the output of the same laser is used as a test beam for the SESAM reflectivity. At zero delay, the probe pulse overlaps in time with the subsequent intracavity pulse.

On the performance of molecular dynamics applications on current high-end systems.

The effective exploitation of current high performance computing (HPC) platforms in molecular simulation relies on the ability of the present generation of parallel molecular dynamics code to make effective utilisation of these platforms and their components, including CPUs and memory. In this paper, we investigate the efficiency and scaling of a series of popular molecular dynamics codes on the UK's national HPC resources, an IBM p690+ cluster and an SGI Altix 3700. Focusing primarily on the AMBER, DL_POLY and NAMD simulation codes, we demonstrate the major performance and scalability advantages that arise through a distributed, rather than a replicated data approach.

Intracellular activities of Salmonella enterica in murine dendritic cells.

Dendritic cells (DC) efficiently phagocytose invading bacteria, but fail to kill intracellular pathogens such as Salmonella enterica serovar Typhimurium (S. Typhimurium). We analysed the intracellular fate of Salmonella in murine bone marrow-derived DC (BM-DC).

Migration of Salmonella typhimurium --harboring bone marrow--derived dendritic cells towards the chemokines CCL19 and CCL21.

Macrophages are considered as main cellular target encountered by the facultative intracellular bacterium Salmonella typhimurium. However, in orally infected mice these pathogens are first internalized by dendritic cells (DCs) that are located in the subepithelial dome of Peyer's patches. Moreover, DCs can penetrate the intestinal epithelium to sample bacteria.