Two decades of continuous progresses and breakthroughs in the field of bioactive ceramics and glasses driven by CICECO-hub scientists.

Over the past two decades, the CICECO-hub scientists have devoted substantial efforts to advancing bioactive inorganic materials based on calcium phosphates and alkali-free bioactive glasses. A key focus has been the deliberate incorporation of therapeutic ions like Mg, Sr, Zn, Mn, or Ga to enhance osteointegration and vascularization, confer antioxidant properties, and impart antimicrobial effects, marking significant contributions to the field of biomaterials and bone tissue engineering. Such an approach is expected to circumvent the uncertainties posed by methods relying on growth factors, such as bone morphogenetic proteins, parathyroid hormone, and platelet-rich plasma, along with their associated high costs and potential adverse side effects.

Evaluation of Biphasic Calcium Phosphate Scaffolds Derived from Cuttlefish Bone Coated with Poly(ester urea) for Bone Tissue Regeneration.

This study investigates the osteogenic differentiation of umbilical-cord-derived human mesenchymal stromal cells (hUC-MSCs) on biphasic calcium phosphate (BCP) scaffolds derived from cuttlefish bone doped with metal ions and coated with polymers. First, the cytocompatibility of the undoped and ion-doped (Sr, Mg and/or Zn) BCP scaffolds was evaluated for 72 h using Live/Dead staining and viability assays. From these tests, the most promising composition was found to be the BCP scaffold doped with strontium (Sr), magnesium (Mg) and zinc (Zn) (BCP-6Sr2Mg2Zn).

Multi-Parametric Exploration of a Selection of Piezoceramic Materials for Bone Graft Substitute Applications.

This work was devoted to the first multi-parametric unitary comparative analysis of a selection of sintered piezoceramic materials synthesised by solid-state reactions, aiming to delineate the most promising biocompatible piezoelectric material, to be further implemented into macro-porous ceramic scaffolds fabricated by 3D printing technologies. The piezoceramics under scrutiny were: KNbO, LiNbO, LiTaO, BaTiO, Zr-doped BaTiO, and the (BaCa)(TiZr)O solid solution (BCTZ). The XRD analysis revealed the high crystallinity of all sintered ceramics, while the best densification was achieved for the BaTiO-based materials via conventional sintering.

Fabrication and biological evaluation of three-dimensional (3D) Mg substituted bi-phasic calcium phosphate porous scaffolds for hard tissue engineering.

This work reports on the fabrication of three-dimensional (3D) magnesium substituted bi-phasic calcium phosphate (Mg-BCP) scaffolds by gel-casting, their structural and physico-chemical characterization, and on the assessment of their and performances. The crystalline phase assemblage, chemical functional groups and porous morphology features of the scaffolds were evaluated by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR) and field emission scanning electron microscopy (FE-SEM), respectively. The sintered scaffolds revealed an interconnected porosity with pore sizes ranging from 4.

Antimicrobial Activity of a 3D-Printed Polymethylmethacrylate Dental Resin Enhanced with Graphene.

The present study aimed to test, in vitro, the antimicrobial activity against and and the surface roughness of a 3D-printed polymethylmethacrylate dental resin enhanced with graphene. A 3D-printed polymethylmethacrylate dental resin was reinforced with four different concentrations of graphene: 0.01, 0.

New and Efficient Bioactive Glass Compositions for Controlling Endodontic Pathogens.

Endodontic treatment aims to conserve teeth through removing infected tissue, disinfecting, and filling/sealing the root canal. One of the most important treatment steps is the removal of microorganisms to avoid reinfection and consequent tooth loss. Due to increased resistance to intracanal medications, new alternative procedures are needed.

Robocasting of 3D printed and sintered ceria scaffold structures with hierarchical porosity for solar thermochemical fuel production from the splitting of CO.

We report the first ever robocast (additive manufacturing/3D printing) sintered ceria scaffolds, and explore their use for the production of renewable fuels solar thermochemical fuel production (STFP, water and carbon dioxide splitting using concentrated solar energy). CeO catalyst scaffolds were fabricated as 50 mm diameter discs (struts and voids ∼500 μm), sintered at 1450 °C, with specific surface area of 1.58 m g.

Highly Porous Composite Scaffolds Endowed with Antibacterial Activity for Multifunctional Grafts in Bone Repair.

The present study deals with the development of multifunctional biphasic calcium phosphate (BCP) scaffolds coated with biopolymers-poly(ε-caprolactone) (PCL) or poly(ester urea) (PEU)-loaded with an antibiotic drug, Rifampicin (RFP). The amounts of RFP incorporated into the PCL and PEU-coated scaffolds were 0.55 ± 0.

3D Printing of Macro Porous Sol-Gel Derived Bioactive Glass Scaffolds and Assessment of Biological Response.

3D printing emerged as a potential game-changer in the field of biomedical engineering. Robocasting in particular has shown excellent capability to produce custom-sized porous scaffolds from pastes with suitable viscoelastic properties. The materials and respective processing methods developed so far still need further improvements in order to obtain completely satisfactory scaffolds capable of providing both the biological and mechanical properties required for successful and comprehensive bone tissue regeneration.

Sol-Gel Synthesis and Characterization of a Quaternary Bioglass for Bone Regeneration and Tissue Engineering.

Sol-gel synthesis using inorganic and/or organic precursors that undergo hydrolysis and condensation at room temperature is a very attractive and less energetic method for preparing bioactive glass (BG) compositions, as an alternative to the melt-quenching process. When properly conducted, sol-gel synthesis might result in amorphous structures, with all of the components intimately mixed at the atomic scale. Moreover, developing new and better performing materials for bone tissue engineering is a growing concern, as the aging of the world's population leads to lower bone density and osteoporosis.

Fabrication of three dimensional bioactive Sr substituted apatite scaffolds by gel-casting technique for hard tissue regeneration.

This study aimed to fabricate three-dimensional (3D) bioactive Sr -substituted apatite (Sr-HAP) scaffolds prepared by gel-casting with polymer sponge infiltration technique. 3D Sr-HAP scaffolds were prepared as engineering constructs with interconnected porous structure with a pore size of 200-600 μm ranging from a 10 × 10 × 6 mm size was designed. The characterization of X-ray diffraction, field emission scanning electron microscopy, and energy dispersion spectroscopy was utilized in order to evaluate the crystalline phase, structure, and morphology in the interconnected porous of the synthesized Sr-HAP scaffold.

Direct Ink Writing Glass: A Preliminary Step for Optical Application.

In this paper, we present a preliminary study and conceptual idea concerning 3D printing water-sensitive glass, using a borosilicate glass with high alkali and alkaline oxide contents as an example in direct ink writing. The investigated material was prepared in the form of a glass frit, which was further ground in order to obtain a fine powder of desired particle size distribution. In a following step, inks were prepared by mixing the fine glass powder with Pluoronic F-127 hydrogel.

Elucidating the formation of Al-NBO bonds, Al-O-Al linkages and clusters in alkaline-earth aluminosilicate glasses based on molecular dynamics simulations.

Exploring the reasons for the initiation of Al-O-Al bond formation in alkali-earth alumino silicate glasses is a key topic in the glass-science community. Evidence for the formation of Al-O-Al and Al-NBO bonds in the glass composition 38.7CaO-9.

Surface functionalization of cuttlefish bone-derived biphasic calcium phosphate scaffolds with polymeric coatings.

Cuttlefish bone (CB) has been explored as biomaterial in the bone tissue-engineering field due to its unique porous structure and capacity of the aragonite mineral to be hydrothermally converted into calcium phosphates (CaPs). In the present study, undoped and ion (Sr, Mg and/or Zn) doped biphasic calcium phosphate (BCP) scaffolds were prepared by hydrothermal transformation (HT, 200 °C, 24 h) of CB. The obtained scaffolds were sintered and then coated with two commercial polymers, poly(ε-caprolactone) (PCL) or poly(DL-lactide) (PDLA), and with two synthesized ones, a poly(ester amide) (PEA) or a poly(ester urea) (PEU) in order to improve their compressive strength.

Cuttlefish Bone-Derived Biphasic Calcium Phosphate Scaffolds Coated with Sol-Gel Derived Bioactive Glass.

The combination of calcium phosphates with bioactive glasses (BG) has received an increased interest in the field of bone tissue engineering. In the present work, biphasic calcium phosphates (BCP) obtained by hydrothermal transformation of cuttlefish bone (CB) were coated with a Sr-, Mg- and Zn-doped sol-gel derived BG. The scaffolds were characterized by X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy.

Structure and Stability of High CaO- and PO-Containing Silicate and Borosilicate Bioactive Glasses.

The present work elucidates about the structure of bioactive glasses having chemical compositions expressed as (mol %) (50.0 - )SiO-BO-9.3NaO-37CaO-3.

Cytotoxicity and bioactivity assessments for Cu and La doped high-silica sol-gel derived bioglasses: The complex interplay between additive ions revealed.

We show the influence of two functional ions (Cu and La ), incorporated into a quaternary (Si, Ca, Na, P) sol-gel derived bioactive glass system, on its particle size, cytotoxicity, and bioactivity. By doping the parent glass with the two ions in singular or combined forms, 15 doped glasses were prepared by a rapid sol-gel technique. The influence of the combined doping on the particle size and cell viability was successfully evaluated by the aid of signal-to-noise-ratio (S/N), using Taguchi analysis.

Robocasting of Cu & La doped sol-gel glass scaffolds with greatly enhanced mechanical properties: Compressive strength up to 14 MPa.

This research details the successful fabrication of scaffolds by robocasting from high silica sol-gel glass doped with Cu or La. The parent HSSGG composition within the system SiO-CaO-NaO-PO [67% Si - 24% Ca - 5% Na - 4% P (mol%)] was doped with 5 wt% Cu or La (Cu5 and La5). The paper sheds light on the importance of copper and lanthanum in improving the mechanical properties of the 3-D printed scaffolds.

Chitosan and polyethylene glycol based membranes with antibacterial properties for tissue regeneration.

The prevention of microbial infections associated with implantable medical devices and superficial wounds represents one of the main research strategies in the field of biomaterials. The present study reports on the development of composite membranes of Chitosan (CS)-Polyethylene glycol (PEG) matrix, incorporating particles of biphasic calcium phosphate (BCP), zinc oxide (ZnO) and copper oxide (CuO). The properties that are relevant for intended applications in tissue regeneration and antibacterial coatings of implants were assessed.

Doping β-TCP as a Strategy for Enhancing the Regenerative Potential of Composite β-TCP-Alkali-Free Bioactive Glass Bone Grafts. Experimental Study in Rats.

The present work aims at evaluating the potential gains derived from partially replacing calcium in resorbable β-tricalcium phosphate (β-TCP) by two different molar percentages of strontium (5, 10) and zinc (1, 2), concomitantly with a fixed molar percentage (0.5) of manganese. Synthetic granular composite bone filling grafts consisting of doped β-TCP and an alkali-free bioactive glass were prepared and implanted in ~4 mm diameter bone defects drilled in the calvaria of Wistar rats used as animal models.

Bioactive Glasses and Glass-Ceramics for Healthcare Applications in Bone Regeneration and Tissue Engineering.

The discovery of bioactive glasses (BGs) in the late 1960s by Larry Hench et al. was driven by the need for implant materials with an ability to bond to living tissues, which were intended to replace inert metal and plastic implants that were not well tolerated by the body. Among a number of tested compositions, the one that later became designated by the well-known trademark of 45S5 Bioglass excelled in its ability to bond to bone and soft tissues.

Novel sintering-free scaffolds obtained by additive manufacturing for concurrent bone regeneration and drug delivery: Proof of concept.

Advances on the fabrication of sintering-free biphasic calcium phosphate (BCP)/natural polymer composite scaffolds using robocasting as additive manufacturing technique are presented in the present work. Inks with high amounts of BCP powders (45 vol%) containing different HA/β-TCP ratios, in presence of crosslinked polymer, were successfully fine-tuned for extrusion by robocasting. The non-existence of sintering step opened the possibility to obtain drug loaded scaffolds by adding levofloxacin to the extrudable inks.

Cationic Substitutions in Hydroxyapatite: Current Status of the Derived Biofunctional Effects and Their In Vitro Interrogation Methods.

High-performance bioceramics are required for preventing failure and prolonging the life-time of bone grafting scaffolds and osseous implants. The proper identification and development of materials with extended functionalities addressing socio-economic needs and health problems constitute important and critical steps at the heart of clinical research. Recent findings in the realm of ion-substituted hydroxyapatite (HA) could pave the road towards significant developments in biomedicine, with an emphasis on a new generation of orthopaedic and dentistry applications, since such bioceramics are able to mimic the structural, compositional and mechanical properties of the bone mineral phase.