Tapered-open-cavity-based in-line Mach-Zehnder interferometer for highly sensitive axial-strain measurement.

An in-line Mach-Zehnder interferometer based on a multimode-fiber-assisted tapered open-cavity (TOC) is proposed. Light field distributions of the TOC were investigated using beam propagation method with different offsets and diameters of the taper waist. Bias and uniform taper (BT and UT)-based structures were fabricated and compared using one- and two-step arc-discharge methods, and comprehensive tests were then conducted considering axial-strain.

Bias twisting in side-tapered PMF Sagnac loop interferometer for simultaneous measurement of directional torsion and temperature.

The polarization-maintaining fiber-based Sagnac loop interferometer (PSLI) is frequently applied in directional torsion measurement, but may suffer from a large temperature cross talk. In this study, a novel method was proposed for fabrication of side-tapered PSLI by a two-step arc-discharge technique at the splicing point. The energy distribution of the taper region was characterized, and comprehensive tests were performed in terms of torsion and temperature.

Up-down Taper Based In-Fiber Mach-Zehnder Interferometer for Liquid Refractive Index Sensing.

A novel in-fiber Mach-Zehnder interferometer based on cascaded up-down-taper (UDT) structure is proposed by sandwiching a piece of polarization maintaining fiber between two single-mode fibers (SMF) and by utilizing over-fusion splicing method. The dual up tapers respectively act as fiber splitter/combiner, the down taper acts as an optical attenuator. The structure parameters are analyzed and optimized.

Two-mode fiber based directional torsion sensor with intensity modulation and 0° turning point.

In this paper, we report a novel in-fiber Mach-Zehnder interferometer based directional torsion sensor, in which a section of two-mode fiber is sandwiched between two single mode fibers by over core-offset splicing technique. The variety of fringe visibility demonstrates the strong dependence on offset and fiber length. For the first time the near zero visibility at 0° rotating state is obtained by fine offset-modulation.

Dual-ring dual-wavelength fiber laser sensor for simultaneous measurement of refractive index and ambient temperature with improved discrimination and detection limit.

In this paper, an in-line Mach-Zehnder interferometer embedded in a fiber Bragg grating (FBG) is fabricated by a tiny offset-core splicing technique and inserted into a fiber ring laser to effectively improve the detection limit and discrimination of sensing. Through fine power adjustment, the stable operation of dual-wavelength lasing is completed in a single FBG for the first time to our knowledge, and simultaneous measurement of refractive index (RI) and ambient temperature is achieved with high discrimination due to the RI immunity of the FBG. The experimental results indicate that the sensitivities of RI and temperature are -30.

Ultra-Sensitive Fiber Refractive Index Sensor with Intensity Modulation and Self-Temperature Compensation.

In this paper, a novel in-line modal interferometer for refractive index (RI) sensing is proposed and experimentally fabricated by cascading single-taper and multimode-double- cladding-multimode (MDM) fiber structure. Owing to evanescent field in taper area, the ultra-sensitive and linear intensity-responses to the varied surrounding RI are gained in both single- and double-pass structures. Moreover, the crosstalk from temperature can be effectively discriminated and compensated by means of the RI-free nature of MDM.

Fiber Ring Laser Directional Torsion Sensor with Ultra-Wide Linear Response.

In this paper, a comprehensive passive torsion measurement is performed firstly in a 40-cm-long polarization maintaining fiber-based Sagnac interferometer (PMF-SI), and the non-linear torsion response is found and investigated. Then, a fiber laser torsion sensor (FLTS) with a dual-ring-cavity structure is proposed and experimentally demonstrated, in which the PMF-SI is utilized as the optical filter as well as the sensing unit. In particular, the highly sensitive linear range is adjusted through fine phase modulation, and owing to the flat-top feature of fringes, an ~83.

Intensity Demodulated Refractive Index Sensor Based on Front-Tapered Single-Mode-Multimode-Single-Mode Fiber Structure.

A novel intensity demodulated refractive index (RI) sensor is theoretically and experimentally demonstrated based on the front-tapered single-mode-multimode-single-mode (FT-SMS) fiber structure. The front taper is fabricated in a section of multimode fiber by flame-heated drawing technique. The intensity feature in the taper area is analyzed through the beam propagation method and the comprehensive tests are then conducted in terms of RI and temperature.

Bias-scanning based tunable LSPR sensor.

The principle and the characteristics of the bias-scanning based tunable localized surface plasmon resonance (LSPR) sensors for environmental refractive index have been theoretically and numerically investigated in detail. The sensors exhibit linear negative-shifts in the scattering-bias spectral position when the refractive index of the surrounding medium increases. By bias-scanning, a single-wavelength measurement for sensing the environmental refractive index can be realized effectively.