In Situ Real-Time Atomic Force Microscopy Observation of the Surface Mobility on Each Domain of a Polystyrene--poly(methyl methacrylate) Film at High Temperatures.

The surface chain movements within the microdomains of a polystyrene--poly(methyl methacrylate) (PS--PMMA) and corresponding homopolymer films were observed via in situ real-time atomic force microscopy (AFM) at high temperatures and analyzed quantitatively using particle image velocimetry (PIV). At low temperatures, mobility within the PS microdomains resembled that within the PS homopolymer film, but movements in the PMMA microdomains were notably accelerated compared to the PMMA homopolymer. Conversely, at high temperatures, mobility within both PS and PMMA microdomains was considerably suppressed compared to their respective homopolymer films, likely owing to the fixed linkage of the block chains at the microdomain interface.

In Situ Real-Time Atomic Force Microscopy Observations of Chain Mobility at Polymer/Water Interfaces of Poly(methyl methacrylate), Poly(2-hydroxyethyl methacrylate), and Poly(2-methoxyethyl methacrylate) Films in Water.

Polymer materials are widely used in water or in contact with an aqueous environment. However, evaluating the chain mobility, a crucial parameter, at a polymer-water interface is challenging. In this study, we, for the first time, observed poly(methyl methacrylate) (PMMA), poly(2-hydroxyethyl methacrylate) (PHEMA), and poly(2-methoxyethyl methacrylate) (PMEMA) film surfaces in water via in situ real-time atomic force microscopy (AFM) in tapping mode and quantified the chain mobility.

Crystallization of Star-Shaped Poly(l-lactide)s with Arm Chains Aligned in the Same Direction in Two-Dimensional Crystals in a Langmuir Monolayer.

Polylactide (PLA) crystallizes to form extended-chain crystals in a Langmuir monolayer because crystallization is accelerated on the water surface. This is a unique situation where chain packing can be analyzed by simply measuring the lamellar thickness. Herein, star-shaped poly(l-lactide)s (PLLAs) with 2-12 arms were synthesized through the polymerization of l-lactide with various polyols as initiators, and their crystallization behavior in a monolayer was studied via atomic force microscopy.

Chain Movements at the Topmost Surface of Poly(methyl methacrylate) and Polystyrene Films Directly Evaluated by In Situ High-Temperature Atomic Force Microscopy.

The surfaces of polymeric materials are thermodynamically unstable, and the glass-transition temperature () is significantly lower than that in the bulk material. However, the mobility of the chains at the top of the surface has never been directly evaluated. In this study, the movements of the topmost chains of poly(methyl methacrylate) (PMMA) and polystyrene (PS) bulk films were observed in situ at high temperatures with atomic force microscopy in tapping mode.

Molecular Combing of Various Poly(-Alkyl Acrylate) Chains on Mica by the Dipping Method.

If polymer chains could be deposited on a substrate as a fully extended chain, a procedure known as "molecular combing," the chain structure could be characterized by atomic force microscopy in more detail than has been possible with the measurements available today. We show here, for the first time, that flexible polymers can be molecularly combed to fully extended chains by the dipping method. We studied the molecular combing of a series of poly(-alkyl acrylate)s on mica from a chloroform solution by the dipping method and found that poly(-alkyl acrylate)s with an alkyl group longer than -octyl can be molecularly combed into straight chains under optimized conditions.

Gemini Thermotropic Smectic Liquid Crystals for Two-Dimensional Nanostructured Water-Treatment Membranes.

We have developed a two-dimensional (2D) liquid-crystalline (LC) nanostructured water-treatment membrane showing high virus rejection ability (over 99.99997% for bacteriophage Qβ) and improved water permeation. Polymerizable gemini amphiphiles have been designed and synthesized.

In situ AFM Observation of the Movements of Isolated Isotactic Poly(methyl methacrylate) Chains in a Precursor Film of an Oligo(methyl methacrylate) Droplet Spreading on Mica.

Atomic force microscopy (AFM) is a powerful tool to observe polymer chains at the molecular level. In this study, we show that the movements of isolated linear polymer chains in a precursor film of a droplet of an oligomer spreading on a substrate could be visualized in situ at the molecular level by AFM for the first time. The system was an isotactic poly(methyl methacrylate) (it-PMMA) solubilized in an oligo(MMA) matrix (it-PMMA/oligo(MMA) = 1/10,000 w/w) spreading on mica under high humidity.

Preparation of a Si(111) Atomically Flat Substrate via Wet Etching and Evaluation as an AFM Substrate for Observations of Isolated Chains, Crystals, and Crystallization of Isotactic Poly(methyl methacrylate) at the Molecular Level.

To observe a polymer chain deposited on a substrate by atomic force microscopy (AFM) at the molecular level, the substrate should be atomically flat and stable under laboratory conditions and adsorb polymer chains firmly. Therefore, substrates used under laboratory conditions are practically limited to mica, highly ordered pyrolytic graphite, and atomically stepped sapphire, and polymers observed by AFM at the molecular level are also limited. A silicon wafer is frequently used as a substrate for AFM observation for somewhat macroscopic observations, but the surface of the silicon wafer is too rough to observe polymer chains deposited on it at the molecular level.

Self-Assembly of Linear and Cyclic Polylactide Stereoblock Copolymers with a Parallel and Antiparallel Chain Arrangement Distinguishing Their Directions on a Water Surface.

The self-assembly of molecules into a well-ordered structure is one of the most important processes in fabricating sophisticated materials. Here, we show that polymer chains can be self-assembled, distinguishing their direction (parallel or antiparallel), and could be a new useful scaffold for self-assembly in a controlled direction. The system that was used was a stereocomplex (SC) formation of linear and cyclic polylactide (PLA) stereoblock copolymers with a parallel and antiparallel chain arrangement in a Langmuir monolayer.

Condensed desmin and actin cytoskeletal communication in lipid droplets.

The interplay between intermediate filaments (IFs) and other cytoskeletal components is important for the integrity and motility of cells. The impact of IF assembly on other components and cell morphology is not yet fully understood. Therefore, we examined the effects of combined desmin and actin assembly on cytoskeletal network arrangement in artificial cell-sized droplets.

Evaluation of Ring Expansion-Controlled Radical Polymerization System by AFM Observation.

We here present a direct link between the reaction mechanisms for the ring-expansion "vinyl" polymerization system and atomic force microscopy (AFM) observations. The brush-modification clearly discriminates the desired cyclic species with the contour lengths () of 28-132 nm and molar masses () of 60.2-283 kg mol from the other linear ones.

Molecular Combing of a Flexible Polymer Chain by Simple Spin-Casting.

If polymer chains could be fixed on a substrate as a fully elongated chain, a procedure known as "", the chain structure could be analyzed more precisely than has been possible with the characterization techniques available today. Although the molecular combing of a rigid biomolecule, DNA, has been attained for the mapping of genetic information, that of flexible chains has never been achieved as yet. We show here that poly(-nonyl acrylate) (PNA) can be molecularly combed on mica by a simple spin-casting method, and that the chain lengths were in good agreement with that of the all-trans conformation.

Morphology control through hierarchical phase separation in Langmuir monolayers of poly(methyl methacrylate)-b-poly(n-butyl acrylate).

Precise morphology control of ultrathin films is one of the important issues in nanotechnology. To this end, we describe that various controlled morphologies of hierarchical phase separation can be attained using poly(methyl methacrylate)-b-poly(n-butyl acrylate) (PMMA-b-PBA) monolayers spread on a water surface. At a low surface pressure, they were miscible, but upon compression, phase separated with a monolayer of the major component block spreading on the water surface, on top of which the minor component block separated out (hierarchical phase separation).

Crystallization behavior of single isotactic poly(methyl methacrylate) chains visualized by atomic force microscopy.

We have, for the first time, successfully visualized the crystallization behavior of a single isolated polymer chain at the molecular level by atomic force microscopy (AFM). Previously, we found that isotactic poly(methyl methacrylate) (it-PMMA) formed two-dimensional folded chain crystals composed of double-stranded helices upon compression of its Langmuir monolayer on a water surface, and the molecular images of the crystals deposited on mica were clearly visualized by AFM (Kumaki, J.; et al.

Two-dimensional phase separation of a poly(methyl methacrylate)/poly(L-lactide) mixed Langmuir monolayer via a spinodal decomposition mechanism.

We have found the first evidence that a polymer blend Langmuir monolayer can phase-separate via spinodal decomposition (SD) mechanism. The system was a poly(methyl methacrylate)/poly(L-lactide) mixture. It phase-separated immediately after compression on a water surface and formed a spinodal-like morphology, as observed by atomic force microscopy (AFM).

Significant melting point depression of two-dimensional folded-chain crystals of isotactic poly(methyl methacrylate)s observed by high-resolution in situ atomic force microscopy.

The properties of polymer ultrathin films are a subject of intense study from both practical and academic viewpoints. Previously, we found that upon compression, an isotactic poly(methyl methacrylate) (it-PMMA) Langmuir monolayer crystallized to form a two-dimensional (2D) folded-chain crystal, and the molecular image of the crystal with chain folding and tie chains was clearly visualized by atomic force microscopy (AFM). In the present study, the melting behaviors of the it-PMMA 2D crystals were successfully observed in situ by high-temperature AFM at the molecular lever for the first time.

Visualization of two-dimensional single chain conformations solubilized in a miscible polymer blend monolayer by atomic force microscopy.

Polymer Langmuir monolayers spread on a water surface are one of the best models for two-dimensional (2D) polymer and have been extensively studied. However, the most fundamental issue in understanding a 2D film, the polymer chain packing in the film, is still not well-understood, especially from the experimental point of view. Direct observation of the chain packing by microscopy at a molecular level, such as by atomic force microscopy (AFM), might be one of the most promising ways to study this issue; however, because of the limited resolution of the method, the chain packing of polymer cannot be resolved by AFM, except for especially large polymers.

Hierarchical amplification of macromolecular helicity of dynamic helical poly(phenylacetylene)s composed of chiral and achiral phenylacetylenes in dilute solution, liquid crystal, and two-dimensional crystal.

Optically active poly(phenylacetylene) copolymers consisting of optically active and achiral phenylacetylenes bearing L-alanine decyl esters (1L) and 2-aminoisobutylic acid decyl esters (Aib) as the pendant groups (poly(1L(m)-co-Aib(n))) with various compositions were synthesized by the copolymerization of the optically active 1L with achiral Aib using a rhodium catalyst, and their chiral amplification of the macromolecular helicity in a dilute solution, a lyotropic liquid crystalline (LC) state, and a two-dimensional (2D) crystal on the substrate was investigated by measuring the circular dichroism of the copolymers, mesoscopic cholesteric twist in the LC state (cholesteric helical pitch), and high-resolution atomic force microscopy (AFM) images of the self-assembled 2D helix-bundles of the copolymer chains. We found that the macromolecular helicity of poly(1L(m)-co-Aib(n))s could be hierarchically amplified in the order of the dilute solution, LC state, and 2D crystal. In sharp contrast, almost no chiral amplification of the macromolecular helicity was observed for the homopolymer mixtures of 1L and Aib in the LC state and 2D crystal on graphite.

Separation of C70 over C60 and selective extraction and resolution of higher fullerenes by syndiotactic helical poly(methyl methacrylate).

A one-handed helical polymer, syndiotactic poly(methyl methacrylate) (st-PMMA), recognizes the size and chirality of higher fullerenes through an induced-fit mechanism and can selectively extract enantiomers of the higher fullerenes, such as C(76), C(80), C(84), C(86), C(88,) C(90), C(92), C(94), and C(96). This discovery will generate a practical and valuable method for selectively extracting the elusive higher fullerenes and their enantiomers and opens the way to developing novel carbon cage materials with optical activities.

Strong compression rate dependence of phase separation and stereocomplexation between isotactic and syndiotactic poly(methyl methacrylate)s in a Langmuir monolayer observed by atomic force microscopy.

The stereocomplex formation between isotactic and syndiotactic poly(methyl methacrylate) (it-PMMA, st-PMMA) in a Langmuir monolayer was studied by surface pressure-area isotherms and atomic force microscopy (AFM). We found that the stereocomplex formation was highly sensitive to the compression rate of the monolayer. At a normal compression rate of 0.

Visualization of polymer chain conformations in amorphous polyisocyanide Langmuir-Blodgett films by atomic force microscopy.

Polymer Langmuir monolayers are an ideal model for two-dimensional (2D) polymer chains, but our understanding of them is still limited. Using atomic force microscopy, we have for the first time successfully visualized the polymer chain packings in amorphous polyisocyanide monolayers deposited on mica. The long polymer chains, which were partially forced to form hairpin-like conformations, were sophisticatedly packed in the 2D film without any chain stacking.

Visualization of synthetic helical polymers by high-resolution atomic force microscopy.

Direct observations of the helical structures of artificial helical polymers, such as helical polyacetylenes and polyisocyanides, by atomic force microscopy (AFM) are described in this tutorial review. The two-dimensional helix bundle formation of specific helical polymers on substrates under solvent vapor exposure permits us to determine their helical structures, including their helical pitch and handedness, at a molecular level by AFM in the tapping mode. The direct observation of supramolecular helical structures based on stereoregular poly(methyl methacrylate)s is also described.

Helix-sense-controlled synthesis of optically active poly(methyl methacrylate) stereocomplexes.

Optically active poly(methyl methacrylate) (PMMA) stereocomplexes were prepared through the helix-sense-controlled supramolecular inclusion of an isotactic (it) PMMA within the helical cavity of an optically active, fullerene-encapsulated syndiotactic (st) PMMA with a macromolecular helicity memory. The observed and calculated vibrational circular dichroism spectra revealed that the it-PMMA replaced the encapsulated fullerenes to fold into a double-stranded helix with the same handedness as that of the st-PMMA single helix through the formation of a topological triple-stranded helix.

Double-stranded helical polymers consisting of complementary homopolymers.

Two complementary homopolymers of chiral amidines and achiral carboxylic acids with m-terphenyl-based backbones were synthesized by the copolymerization of a p-diiodobenzene derivative with the diethynyl monomers bearing a chiral amidine group and a carboxyl group using the Sonogashira reaction, respectively. Upon mixing in THF, the homopolymer strands assembled into a preferred-handed double helix through interstrand amidinium-carboxylate salt bridges, as evidenced by its absorption, circular dichroism, and IR spectra. In contrast, when mixed in less polar solvents, such as chloroform, the complementary strands kinetically formed an interpolymer complex with an imperfect double helical structure containing a randomly hybridized cross-linked structure, probably because of strong salt bridge formations.

Molecular weight recognition in the multiple-stranded helix of a synthetic polymer without specific monomer-monomer interaction.

Stereoregular isotactic and syndiotactic poly(methyl methacrylate)s (it- and st-PMMAs) are known to form a multiple-stranded complementary helix, so-called stereocomplex (SC) through van der Waals interactions, which is a rare example of helical supramolecular structures formed by a commodity polymer. In this study, we prepared SCs by using uniform it- and st-PMMAs and those with a narrow molecular weight distribution having different molecular weights and investigated their structures in detail using high-resolution atomic force microscopy as a function of the molecular weight and molecular weight distribution of the component PMMAs. We found that complementary it- and st-PMMAs with the longer molecular length determine the total length of the SC, and molecules of the shorter component associate until they fill up or cover the longer component.