Construction of an assessment scale for thirst severity in critically ill patients and its reliability and validity.

Objective: Developing a severity assessment scale for critically ill patients' thirst and conducting reliability and validity tests, aiming to provide healthcare professionals with a scientific and objective tool for assessing the level of thirst.

Methods: Based on literature review and qualitative interviews, a pool of items was generated, and a preliminary scale was formed through two rounds of Delphi expert consultation. Convenience sampling was employed to select 178 ICU patients in a top-three hospital from May 2023 to October 2023 as the study subjects to examine the reliability and validity of the severity assessment scale for critically ill patients' thirst.

Atomically Dispersed Iridium on Polyimide Support for Acidic Oxygen Evolution.

Designing a high-performing iridium (Ir) single-atom catalyst is desired for acidic water electrolysis, which shows enormous potential given its high catalytic activity toward acidic oxygen evolution reaction (OER) with minimum usage of precious Ir metal. However, it still remains a substantial challenge to stabilize the Ir single atoms during the OER operation without sacrificing the activity. Here, we report a high-performing OER catalyst by immobilizing Ir single atoms on a polyimide support, which exhibits a high mass activity on a carbon paper electrode while simultaneously achieving outstanding stability with negligible decay for 360 h.

Enhancement of Biological Nitrogen Removal System Resilience to Chronic Exposure of Zinc Oxide Nanoparticles by Quorum Sensing Modulation: Physiochemical, Microbial, and Metabolic Insights.

The effects of three typical N-acyl-homoserine lactones (AHLs) on the tolerance of biological nitrogen removal (BNR) system to chronic exposure of zinc oxide nanoparticles (NPs) were investigated. C-HSL successfully delayed the crash time of nitrogen removal performances in the NP-stressed system, while C-HSL and C-HSL maintained total nitrogen removal efficiencies throughout the 90-day NP exposure. All three AHLs increased NPs' contents captured in extracellular polymeric substances, alleviating membrane damage and preserving floc structure.

Engineering Partially Oxidized Gold via Oleylamine Modifier as a High-Performance Anode Catalyst in a Direct Borohydride Fuel Cell.

Direct borohydride fuel cell (DBFC) is considered a promising energy storage device due to its high theoretical cell voltage and energy density. For DBFC, an Au catalyst has been used as an anode for achieving an ideal eight-electron reaction. However, the poor activity of the Au catalyst for borohydride oxidation reaction (BOR) limits its large-scale application because of the weak BH adsorption.

High-Entropy Perovskite Oxides as a Family of Electrocatalysts for Efficient and Selective Nitrogen Oxidation.

Electrocatalytic nitrogen oxidation reaction (NOR) can convert nitrogen (N) into nitrate (NO) under ambient conditions, providing an attractive approach for synthesis of NO, alternative to the current approach involving the harsh Haber-Bosch and Ostwald oxidation processes that necessitate high temperature, high pressure, and substantial carbon emission. Developing efficient NOR catalysts is a prerequisite, which remains a formidable challenge, owing to the weak activation/dissociation of N. A variety of NOR electrocatalysts have been developed, but their NOR kinetics are still extremely sluggish, resulting in inferior Faradaic Efficiencies.

Surface charge modulation boosts electrocatalytic water splitting over iridium catalysts on a polyimide support.

Developing high-performance iridium (Ir)-based catalysts with minimal precious Ir metal is a significant but challenging step towards the acidic oxygen evolution reaction (OER). Here, we report a high-performance OER catalyst with Ir nanoparticles on a polyimide support, where the polyimide support can effectively modulate the electronic structures of the Ir active sites for decreased thermodynamic barriers, but also enrich the local proton concentration near the Ir active sites, enhancing the OER rates.

CO electrolysis to multicarbon products over grain boundary-rich Cu nanoparticles in membrane electrode assembly electrolyzers.

Producing valuable chemicals like ethylene via catalytic carbon monoxide conversion is an important nonpetroleum route. Here we demonstrate an electrochemical route for highly efficient synthesis of multicarbon (C) chemicals from CO. We achieve a C partial current density as high as 4.

Stabilization of Pd by Cu Alloying: Theory-Guided Design of PdCu Electrocatalyst for Anodic Methanol Carbonylation.

Electrocatalytic carbonylation of CO and CHOH to dimethyl carbonate (DMC) on metallic palladium (Pd) electrode offers a promising strategy for C1 valorization at the anode. However, its broader application is limited by the high working potential and the low DMC selectivity accompanied with severe methanol self-oxidation. Herein, our theoretical analysis of the intermediate adsorption interactions on both Pd and Pd surfaces revealed that inevitable reconstruction of Pd surface under strongly oxidative potential diminishes its CO adsorption capacity, thus damaging the DMC formation.

Platinum-Tellurium Heterojunction Nanosheet Assemblies for Efficient Direct Formic Acid Electrooxidation Catalysis.

Two-dimensional (2D) heterojunction nanomaterials offer exceptional physicochemical and catalytic properties, thanks to their special spatial electronic structure. However, synthesizing morphologically uniform 2D platinum (Pt)-based metallic nanomaterials with diverse crystalline phases remains a formidable challenge. In this study, we have achieved the successful synthesis of advanced 2D platinum-tellurium heterojunction nanosheet assemblies (Pt-PtTe HJNSAs, = 0, 1, 2), seamlessly integrating both trigonal PtTe (-PtTe) and cubic Pt (-Pt) phases.

Cascaded p-d Orbital Hybridization Interaction in Ultrathin High-Entropy Alloy Nanowires Boosts Complete Non-CO Pathway of Methanol Oxidation Reaction.

Designing high efficiency platinum (Pt)-based catalysts for methanol oxidation reaction (MOR) with high "non-CO" pathway selectivity is strongly desired and remains a grand challenge. Herein, PtRuNiCoFeGaPbW HEA ultrathin nanowires (HEA-8 UNWs) are synthesized, featuring unique cascaded p-d orbital hybridization interaction by inducing dual p-block metals (Ga and Pb). In comparison with Pt/C, HEA-8 UNWs exhibit 15.

CPFTransformer: transformer fusion context pyramid medical image segmentation network.

Introduction: The application of U-shaped convolutional neural network (CNN) methods in medical image segmentation tasks has yielded impressive results. However, this structure's single-level context information extraction capability can lead to problems such as boundary blurring, so it needs to be improved. Additionally, the convolution operation's inherent locality restricts its ability to capture global and long-distance semantic information interactions effectively.

Polypyrrole regulates Active Sites in Co-based Catalyst in Direct Borohydride Fuel Cells.

Direct borohydride fuel cells (DBFCs) convert borohydride (NaBH) chemical energy into clean electricity. However, catalytic active site deactivation in NaBH solution limits their performance and stability. We propose a strategy to regulate active sites in Co-based catalysts using polypyrrole modification (Co-PX catalyst) to enhance electrochemical borohydride oxidation reaction (eBOR).

Perovskite Oxide as A New Platform for Efficient Electrocatalytic Nitrogen Oxidation.

Electrocatalytic nitrogen oxidation reaction (NOR) offers an efficient and sustainable approach for conversion of widespread nitrogen (N ) into high-value-added nitrate (NO ) under mild conditions, representing a promising alternative to the traditional approach that involves harsh Haber-Bosch and Ostwald oxidation processes. Unfortunately, due to the weak absorption/activation of N and the competitive oxygen evolution reaction, the kinetics of NOR process is extremely sluggish accompanied with low Faradaic efficiencies and NO yield rates. In this work, an oxygen-vacancy-enriched perovskite oxide with nonstoichiometric ratio of strontium and ruthenium (denoted as Sr RuO ) was synthesized and explored as NOR electrocatalyst, which can exhibit a high Faradaic efficiency (38.

Self-Interface in Rh Nanosheets-Supported Tetrahedral Rh Nanocrystals for Promoting Electrocatalytic Oxidation of Ethanol.

Direct ethanol fuel cells hold great promise as a power source. However, their commercialization is limited by anode catalysts with insufficient selectivity toward a complete oxidation of ethanol for a high energy density, as well as sluggish catalytic kinetics and low stability. To optimize the catalytic performance, rationally tuning surface structure or interface structure is highly desired.

Pb-rich Cu grain boundary sites for selective CO-to-n-propanol electroconversion.

Electrochemical carbon monoxide (CO) reduction to high-energy-density fuels provides a potential way for chemical production and intermittent energy storage. As a valuable C species, n-propanol still suffers from a relatively low Faradaic efficiency (FE), sluggish conversion rate and poor stability. Herein, we introduce an "atomic size misfit" strategy to modulate active sites, and report a facile synthesis of a Pb-doped Cu catalyst with numerous atomic Pb-concentrated grain boundaries.

Stress response mechanism of wastewater biological nitrogen removal systems to environmentally realistic concentrations of tire wear particles: Contribution of leachable additives.

The study quantified the biological nitrogen removal performance, microbial metabolism, microbial community structure, and antioxidant system in a sequencing batch reactor under long-term exposure to 0.1 and 1 mg/L tire wear particles (TWPs), and determined the contribution of leachable additives to the biotoxicity of TWPs. The results showed that long-term exposure to 0.

Highly Selective Synthesis of Monoclinic-Phased Platinum-Tellurium Nanotrepang for Direct Formic Acid Oxidation Catalysis.

Designing efficient formic acid oxidation reaction (FAOR) catalysts with remarkable membrane electrode assembly (MEA) performance in a direct formic acid fuel cell (DFAFC) medium is significant yet challenging. Herein, we report that the monoclinic-phased platinum-tellurium nanotrepang (-PtTe NT) can be adopted as a highly active, selective, and stable FAOR catalyst with a desirable direct reaction pathway. The -PtTe NT exhibits the high specific and mass activities of 6.

Revealing the interfacial water structure on a -nitrobenzoic acid specifically adsorbed Au(111) surface.

The detailed structure of the water layer in the inner Helmholtz plane of a solid/aqueous solution interface is closely related to the electrochemical and catalytic performances of electrode materials. While the applied potential can have a great impact, specifically adsorbed species can also influence the interfacial water structure. With the specific adsorption of -nitrobenzoic acid on the Au(111) surface, a protruding band above 3600 cm appears in the electrochemical infrared spectra, indicating a distinct interfacial water structure as compared to that on bare metal surfaces, which displays a potential-dependent broad band in the range of 3400-3500 cm.

Full-Dimensional Analysis of Electrolyte Decomposition on Cathode-Electrolyte Interface: Establishing Characterization Paradigm on LiNiCoMnO Cathode with Potential Dependence.

Cathode electrolyte interphase (CEI) layers derived from electrolyte oxidative decomposition can passivate the cathode surface and prevent its direct contact with electrolyte. The inorganics-dominated inner solid electrolyte layer (SEL) and organics-rich outer quasi-solid-electrolyte layer (qSEL) constitute the CEI layer, and both merge at the junction without a clear boundary, which assures the CEI layer with both ionic-conducting and electron-blocking properties. However, the typical "wash-then-test" pattern of characterizations aiming at the microstructure of CEI layers would dissolve the qSEL and even destroy the SEL, leading to an overanalysis of electrolyte decomposition pathway and misassignment of CEI architecture (e.

Multistep Dissolution of Lamellar Crystals Generates Superthin Amorphous Ni(OH) Catalyst for UOR.

Urea oxidation reaction (UOR) is an ideal replacement of the conventional anodic oxygen evolution reaction (OER) for efficient hydrogen production due to the favorable thermodynamics. However, the UOR activity is severely limited by the high oxidation potential of Ni-based catalysts to form Ni , which is considered as the active site for UOR. Herein, by using in situ cryoTEM, cryo-electron tomography, and in situ Raman, combined with theoretical calculations, a multistep dissolution process of nickel molybdate hydrate is reported, whereby NiMoO ·xH O nanosheets exfoliate from the bulk NiMoO ·H O nanorods due to the dissolution of Mo species and crystalline water, and further dissolution results in superthin and amorphous nickel (II) hydroxide (ANH) flocculus catalyst.

High Chemical Potential Driven Amorphization of Pd-based Nanoalloys.

Amorphous metals and alloys are promising candidates for superior catalysts in many catalytic and electrocatalytic reactions. It is of great urgency to develop a general method to construct amorphous alloys and further clarify the growth mechanism in a wet-chemical system. Herein, inspired by the conservation of energy during the crystallization process, amorphous PdCu nanoalloys have been successfully synthesized by promoting the chemical potential of the building blocks in solution.

Highly Selective CO Electroreduction to C Products over CuO-Decorated 2D Metal-Organic Frameworks with Rich Heterogeneous Interfaces.

The electroreduction of carbon dioxide into high-value-added products is an effective approach to alleviating the energy crisis and pollution issues. However, there are still significant challenges for multicarbon (C) product production due to the lack of efficient catalysts with high selectivity. Herein, a Cu-rich electrocatalyst, where CuO nanoparticles are decorated on two-dimensional (2D) Cu-BDC metal-organic frameworks (MOFs) with abundant heterogeneous interfaces, is synthesized for highly selective CO electroreduction into C products.

Mechanism of Cations Suppressing Proton Diffusion Kinetics for Electrocatalysis.

Proton transfer is crucial for electrocatalysis. Accumulating cations at electrochemical interfaces can alter the proton transfer rate and then tune electrocatalytic performance. However, the mechanism for regulating proton transfer remains ambiguous.