Efficient Deep-Blue Light-Emitting Diodes from Highly Luminescent Eu-Doped Alkali Metal Halide Nanocrystals via Lattice Field Modulation.

Lead-halide perovskite nanocrystals (NCs) are promising for fabricating deep-blue (<460 nm) light-emitting diodes (LEDs), but their development is plagued by low electroluminescent performance and lead toxicity. Herein, the synthesis of 12 kinds of highly luminescent and eco-friendly deep-blue europium (Eu)-doped alkali-metal halides (AX:Eu; A = Na, K, Rb, Cs; X = Cl, Br, I) NCs is reported. Through adjustment of the coordination environment, efficient deep-blue emission from Eu-5 → Eu-4 transitions is realized.

Thermally Enhanced and Long Lifetime Red TADF Carbon Dots via Multi-Confinement and Phosphorescence Assisted Energy Transfer.

Thermally activated delayed fluorescence (TADF) materials, which can harvest both singlet and triplet excitons for high-efficiency emission, have attracted widespread concern for their enormous applications. Nevertheless, luminescence thermal quenching severely limits the efficiency and operating stability in TADF materials and devices at high temperature. Herein, a surface engineering strategy is adopted to obtain unique carbon dots (CDs)-based thermally enhanced TADF materials with ≈250% enhancement from 273 to 343 K via incorporating seed CDs into ionic crystal network.

Wide-coverage and Efficient NIR Emission from Single-component Nanophosphors through Shaping Multiple Metal-halide Packages.

Wide-coverage near infrared (NIR) phosphor-converted LEDs possess promising potential for practical applications, but little is developed towards the efficient and wide-coverage NIR phosphors. Here, we report the single-component lanthanide (Ln ) ions doped Cs M(In Sb )Cl (M=alkali metal) nanocrystals (NCs), exhibiting emission from 850 to 1650 nm with high photoluminescence quantum yield of 20.3 %, which is accomplished by shaping the multiple metal halide octahedra of double perovskite via the simple alkali metal substitution.

Synergistic regulation effect of magnesium and acetate ions on structural rigidity for synthesizing an efficient and robust CsPbI perovskite toward red light-emitting devices.

The structure of CsPbI nanocrystals (NCs) with excellent photoelectric properties easily collapses, which hinders their application in light-emitting diodes (LEDs). Herein, we accomplished the synthesis of efficient and stable CsPbI NCs by regulating structural rigidity under the synergistic effect of Mg and AcO ions. The introduced AcO and Mg ions increase surface steric hindrance and defect formation energy, which enhances the structural rigidity of the perovskite.

A Molecular Engineering Strategy for Achieving Blue Phosphorescent Carbon Dots with Outstanding Efficiency above 50.

Highly efficient emission has been a long-lasting pursuit for carbon dots (CDs) owing to their enormous potential in optoelectronic applications. Nevertheless, their room-temperature phosphorescence (RTP) performance still largely lags behind their outstanding fluorescence emission, especially in the blue spectral region. Herein, high-efficiency blue RTP CDs have been designed and constructed via a simple molecular engineering strategy, enabling CDs with an unprecedented phosphorescence quantum efficiency of to 50.

Study of Temperature on the Corrosion Behavior of Antibacterial Steel by a Large-Scale Multiphase Flow Corrosion Test Loop.

The System #2 flow loop used in this study is a 4-inch-diameter, high-temperature, high-pressure system. In situ corrosion and electrochemical measurements were performed using a homemade flat corrosion specimen and a three-electrode probe. The experiment results show that temperature has an accelerated influence on the corrosion of antibacterial alloy steel.

Highly Stable and Efficient Mn Doping Zero-Dimension CsZnPbCl Alloyed Nanorods toward White Electroluminescent Light-Emitting Diodes.

Zero-dimensional (0D) crystal structure perovskite NCs have reemerged as promising materials owing to their superior long-term stability; however, their poor conductivity leads to the inferior electrical performances and critically restricts the optoelectronic application of 0D perovskite materials. Herien, the alloyed 0D crystal structure CsZnPbCl nanorods (NRs) have been synthesized by the modified hot-injection method, which emits bright blue-violet light at 408 nm, and the optimized photoluminescence quantum yield (PLQY) reaches 26%. The CsZnPbCl NRs display more excellent air stability and an order of magnitude higher conductivity than CsPbCl nanocube films.

Efficient and Stable CFPEAI-Passivated CsPbI QDs toward Red LEDs.

Oleylamine and oleic acid are common organic capping ligands used in the hot injection preparation of perovskite quantum dots (QDs). Their labile nature is responsible for the poor colloidal stability and conductivity that affect the performance of perovskite QD light-emitting diodes (LEDs). We introduced 4-trifluoro phenethylammonium iodide (CFPEAI) directly in the synthesis and found that CFPEAI efficiently modified the I vacancy defects on the QD surface and partially substituted the surface capping ligand oleylamine.

White Light Afterglow in Carbon Dots Achieved via Synergy between the Room-Temperature Phosphorescence and the Delayed Fluorescence.

Carbon dot (CD) based long-lived afterglow emission materials have attracted attention in recent years, but demonstration of white-light room-temperature afterglow remains challenging, due to the difficulty of simultaneous generation of multiple long-lived excited states with distinct chromatic emission. In this work, a white-light room-temperature long-lived afterglow emission from a CD powder with a high efficiency of 5.8% and Commission International de l'Eclairage (CIE) coordinates of (0.

Solution-Processed Efficient Perovskite Nanocrystal Light-Emitting Device Utilizing Doped Hole Transport Layer.

Light-emitting devices (LEDs) with inorganic perovskite nanocrystals (PNCs) fabricated through the all-solution process have tremendous potential for new-generation illumination and displays on account of their large area and cost-effective manufacturing. However, the development of efficient solution-processed PNC LEDs remains challenge, which mainly results from the fact that only a few types of charge transport layers can be employed for the subsequent deposition steps, thus leading to injection barriers and charge injection imbalance inside these LEDs. Herein 4,4'-bis(carbazole-9-yl) biphenyl (CBP) is introduced as a dopant into the poly(9,9-dioctylfluorene---(4-(3-methylpropyl)) diphenylamine) (TFB) hole transport layer (HTL), which efficiently modulates the mobility of charge carrier as well as the energy level of the HTL, resulting in the barrier-free injection of the charge carrier in the as-fabricated solution-processed PNC LEDs.

Bright Blue Light Emission of Ni Ion-Doped CsPbClBr Perovskite Quantum Dots Enabling Efficient Light-Emitting Devices.

In recent years, significant advances have been achieved in the red and green perovskite quantum dot (PQD)-based light-emitting diodes (LEDs). However, the performances of the blue perovskite LEDs are still seriously lagging behind that of the green and red counterparts. Herein, we successfully developed Ni ion-doped CsPbClBr PQDs through the room-temperature supersaturated recrystallization synthetic approach.

Oxalic Acid Enabled Emission Enhancement and Continuous Extraction of Chloride from Cesium Lead Chloride/Bromide Perovskite Nanocrystals.

All-inorganic cesium lead halide perovskite nanocrystals (NCs) have demonstrated excellent optical properties and an encouraging potential for optoelectronic applications; however, mixed-halide perovskites, especially CsPb(Cl/Br) NCs, still show lower photoluminescence quantum yields (PL QY) than the corresponding single-halide materials. Herein, anhydrous oxalic acid is used to post-treat CsPb(Cl/Br) NCs in order to initially remove surface defects and halide vacancies, and thus, to improve their PL QY from 11% to 89% for the emission of 451 nm. Furthermore, due to the continuous chelating reaction with the oxalate ion, chloride anions from the mixed-halide CsPb(Cl/Br) perovskite NCs could be extracted, and green emitting CsPbBr NCs with PL QY of 85% at 511 nm emission are obtained.

Impurity Ions Codoped Cesium Lead Halide Perovskite Nanocrystals with Bright White Light Emission toward Ultraviolet-White Light-Emitting Diode.

White light-emitting diodes (WLEDs) based on all-inorganic perovskite CsPbX (X = Cl, Br, I) nanocrystals (NCs) have attracted extensive interests. However, the native ion exchange among halides makes them extremely difficult to realize the white emission. Herein, we demonstrate a novel strategy to obtain WLED phosphors based on the codoping of different metal ion pairs, such as Ce/Mn, Ce/Eu, Ce/Sm, Bi/Eu, and Bi/Sm into stable CsPbCl and CsPbCl Br NCs.

Luminescence carbon dot-based nanofibers for a water-insoluble drug release system and their monitoring of drug release.

Drug release systems with fluorescence detection have emerged as a potential application for the biological area of diagnosis and therapy. Carbon dots (CDs) are a promising fluorescence probe for application in a drug release system due to their excellent biocompatibility, low toxicity, chemical inertness, and non-blinking fluorescence emission. Herein, we developed a composite nanocarrier based on fluorescent CDs and polyvinylpyrrolidone (PVP) through an electrospinning technology.

All-inorganic perovskite quantum dot/TiO inverse opal electrode platform: stable and efficient photoelectrochemical sensing of dopamine under visible irradiation.

CsPbX3 (X = Cl, Br or I) perovskite quantum dots (PQDs) have attracted tremendous attention due to their extraordinarily excellent optical properties. However, there is still an obstacle for their bio-application, which is limited by their water-instability. In this work, we have designed a novel visible light triggered photoelectrochemical (PEC) sensor for dopamine (DA) based on CsPbBr1.

Highly efficient and stable blue-emitting CsPbBr@SiO nanospheres through low temperature synthesis for nanoprinting and WLED.

Inorganic perovskite quantum dots (QDs) have attracted wide attention in display and solid-state lighting because of their easily tunable band-gaps and high photoluminescence quantum yields (PLQY) of green light emission. However, some drawbacks limit their practical applications, including the low PLQY of blue light emission and the instability in the moisture environment. In this work, efficient blue-light emitting CsPbBr perovskite QDs with PLQY of 72% were developed through a bandgap engineering approach.

Carbon dots with efficient solid-state red-light emission through the step-by-step surface modification towards light-emitting diodes.

Carbon dots (CDs) have attracted extensive attention over the past decade due to their excellent advantages. However, few attempts have been reported for realizing the long-wavelength emission, especially for obtaining efficient solid-state red emission with high photoluminescence quantum yield (QY). Herein, we developed highly red light emitting CDs by the step-by-step surface modifications of the nitrogen-doped CDs.

Ratiometric photoluminescence sensing based on TiC MXene quantum dots as an intracellular pH sensor.

Intracellular pH sensing is of importance and can be used as an indicator for monitoring the evolution of various diseases and the health of cells. Here, we developed a new class of surface-functionalized MXene quantum dots (QDs), TiC, by the sonication cutting and hydrothermal approach and further explored their intracellular pH sensing. The functionalized TiC QDs exhibit bright excitation-dependent blue photoluminescence (PL) originating from the size effect and surface defects.

White light emission in Bi/Mn ion co-doped CsPbCl perovskite nanocrystals.

Colloidal perovskite nanocrystals (NCs), especially the fully inorganic cesium lead halide (CsPbX, X = Cl, Br, I) NCs, have been considered as promising candidates for lighting and display applications due to their narrow band emission, tunable band gap and high photoluminescence quantum yields (QYs). However, owing to the anion exchange in the CsPbX NCs, stable multi-color and white light emissions are difficult to achieve, thus limiting their practical optoelectronic applications. In this work, dual ion Bi/Mn codoped CsPbCl perovskite NCs were prepared through the hot injection method for the first time to the best of our knowledge.

Emitting color tunable carbon dots by adjusting solvent towards light-emitting devices.

Carbon dots (CDs), one of the most significant classes of carbon-based nanophosphors, have attracted extensive attention in recent years. However, few attempts have been reported for realizing CDs with tunable emissions, especially for obtaining the red-light emissions with high photoluminescence quantum yields. Herein, we synthesized CDs with different chromatic blue, green and red emissions by facilely changing the reaction solvent during hydrothermal conditions.