Environmental aluminum oxide inducing neurodegeneration in human neurovascular unit with immunity.

Aluminum oxide nanoparticle (AlNP), a ubiquitous neurotoxin highly enriched in air pollution, is often produced as an inevitable byproduct in the manufacturing of industrial products such as cosmetics and metal materials. Meanwhile, ALNP has emerged as a significant public health concern due to its potential association with neurological diseases. However, the studies about the neurotoxic effects of AlNP are limited, partially due to the lack of physiologically relevant human neurovascular unit with innate immunity (hNVUI).

Development of in-vitro pulsatile flow generator for evaluating the performance of hemodialysis catheters.

Hemodialysis (HD) using an HD catheter is performed widely on renal failure patients. The catheter was evaluated using the recirculation ratio in pre-clinical status, which is a crucial index indicating its performance. However, pre-clinical in-vivo experiments have limitations: high cost, and ethical issues.

Room temperature roll-to-roll additive manufacturing of polydimethylsiloxane-based centrifugal microfluidic device for on-site isolation of ribonucleic acid from whole blood.

Polymer-based lab-on-a-disc (LoaD) devices for isolating ribonucleic acid (RNA) from whole blood samples have gained considerable attention for accurate biomedical analysis and point-of-care diagnostics. However, the mass production of these devices remains challenging in manufacturing cost and sustainability, primarily due to the utilization of a laser cutter or router computer numerical control (CNC) machine for engraving and cutting plastics in the conventional prototyping process. Herein, we reported the first energy-efficient room-temperature printing-imprinting integrated roll-to-roll manufacturing platform for mass production of a polydimethylsiloxane (PDMS)-based LoaD to on-site isolate ribonucleic acid (RNA) from undiluted blood samples.

Eco-friendly polycaprolactone-bound diatomite filter for the removal of metal ions and micro/nanoplastics from water.

Over the last few decades, pollution levels in aquatic environments due to heavy metal ions and micro/nanoplastics have increased owing to industrial development, causing adverse effects on microorganisms. Adsorbent-based filtration is a well-developed technique for removing contaminants from aquatic environments. However, this technique should be improved from the perspectives of eco-friendliness and cost-effectiveness, as commercial adsorbents require energy-intensive synthesis and post-processing with chelating agents.

3D printed fluidic swab for COVID-19 testing with improved diagnostic yield and user comfort.

The current standard method of diagnosing coronavirus disease 2019 (COVID-19) involves uncomfortable and invasive nasopharyngeal (NP) sampling using cotton swabs (CS), which can be unsuitable for self-testing. Although mid-turbinate sampling is an alternative, it has a lower diagnostic yield than NP sampling. Nasal wash (NW) has a similar diagnostic yield to NP sampling, but is cumbersome to perform.

Mobile Efficient Diagnostics of Infectious Diseases via On-Chip RT-qPCR: MEDIC-PCR.

The COVID-19 outbreak has caused public and global health crises. However, the lack of on-site fast, reliable, sensitive, and low-cost reverse transcription polymerase chain reaction (RT-PCR) testing limits early detection, timely isolation, and epidemic prevention and control. Here, the authors report a rapid mobile efficient diagnostics of infectious diseases via on-chip -RT-quantitative PCR (RT-qPCR): MEDIC-PCR.

Experimental Investigation of Cavitation Bulk Nanobubbles Characteristics: Effects of pH and Surface-Active Agents.

Nanobubbles (NBs) have a widespread application in antimicrobial activity, wastewater treatment, and ecological restoration due to numerous peculiar characteristics, such as small diameter, long-term stability, and ability to produce hydroxyl radicals. Despite significant applications, only limited comprehensive investigations are available on the role of surfactants and pH in NBs characteristics. Therefore, this study examines the effects of different surfactants (i.

Bioinspired nanoscale hierarchical pillars for extreme superhydrophobicity and wide angular transmittance.

Hierarchical structures in nature provide unique functions for living organisms that can inspire technology. Nanoscale hierarchical structured surfaces are essential to realize the dual functions of non-wetting and transparency for applications such as cover glasses and windows; however, these structures are challenging to fabricate. In this study, nano-hierarchical structured glass surfaces were fabricated using multi-step colloidal lithography and etching to obtain tunable morphology.

Enhancing Mixing Performance in a Rotating Disk Mixing Chamber: A Quantitative Investigation of the Effect of Euler and Coriolis Forces.

Lab-on-a-CD (LOCD) is gaining importance as a diagnostic platform due to being low-cost, easy-to-use, and portable. During LOCD usage, mixing and reaction are two processes that play an essential role in biochemical applications such as point-of-care diagnosis. In this paper, we numerically and experimentally investigate the effects of the Coriolis and Euler forces in the mixing chamber during the acceleration and deceleration of a rotating disk.

Control of the Drying Patterns for Complex Colloidal Solutions and Their Applications.

The uneven deposition at the edges of an evaporating droplet, termed the coffee-ring effect, has been extensively studied during the past few decades to better understand the underlying cause, namely the flow dynamics, and the subsequent patterns formed after drying. The non-uniform evaporation rate across the colloidal droplet hampers the formation of a uniform and homogeneous film in printed electronics, rechargeable batteries, etc., and often causes device failures.

On-chip selection of adenosine aptamer using graphene oxide-coated magnetic nanoparticles.

Systematic evolution of ligands by exponential enrichment (SELEX) is a method that is generally used for developing aptamers, which have arisen the promising alternatives for antibodies. However, conventional SELEX methods have limitations, such as a limited selection of target molecules, time-consuming and complex fabrication processes, and labor-intensive processes, which result in low selection yields. Here, we used (i) graphene oxide (GO)-coated magnetic nanoparticles in the selection process for separation and label-free detection and (ii) a multilayered microfluidic device manufactured using a three-dimensionally printed mold that is equipped with automated control valves to achieve precise fluid flows.

From shaping to functionalization of micro-droplets and particles.

The structure of microdroplet and microparticle is a critical factor in their functionality, which determines the distribution and sequence of physicochemical reactions. Therefore, the technology of precisely tailoring their shape is requisite for implementing the user demand functions in various applications. This review highlights various methodologies for droplet shaping, classified into passive and active approaches based on whether additional body forces are applied to droplets to manipulate their functions and fabricate them into microparticles.

Self-Assembled Monolayers Coated Porous SnO Film Gas Sensor with Reduced Humidity Influence.

Metal-oxide sensors, detect gas through the reaction of surface oxygen molecules with target gases, are promising for the detection of toxic pollutant gases, combustible gases, and organic vapors; however, their sensitivity, selectivity, and long-term stability limit practical applications. Porous structure for increasing surface area, adding catalyst, and altering the operation temperature are proposed for enhancing the sensitivity and selectivity. Although humidity can significantly affect the property and stability of the sensors, studies focusing on the long-term stability of gas sensors are scarce.

Dynamic contact angle measurements on lubricant infused surfaces.

Hypothesis: Even though lubricant-infused surfaces (LISs) are known to affect the mobility of working fluid depending on the infused lubricant, previous studies have not yet quantified their slippery property. This study proposes the slippery nature of the LIS can be assessed by dynamic contact angles of the working fluid on the LIS and its scaling model.

Experiments: We measured the apparent dynamic advancing and receding contact angles on a LIS using a modified Wilhelmy plate technique for the first time.

Development of New Hemodialysis Catheter Using Numerical Analysis and Experiments.

A hemodialysis (HD) catheter, especially one with a symmetric tip design, plays an important role in the long-term treatment of patients with renal failure. It is well known that the design of the HD catheter has a considerable effect on blood recirculation and thrombus formation around it, which may cause inefficiencies or malfunctions during HD. However, hemodynamic analyses through parametric studies of its designs have been rarely performed; moreover, only comparisons between the existing models have been reported.

Electro-Hydrodynamics of Emulsion Droplets: Physical Insights to Applications.

The field of droplet electrohydrodynamics (EHD) emerged with a seminal work of G.I. Taylor in 1966, who presented the so-called leaky dielectric model (LDM) to predict the droplet shapes undergoing distortions under an electric field.

Moth-Eye Mimicking Solid Slippery Glass Surface with Icephobicity, Transparency, and Self-Healing.

Slippery liquid-infused porous surfaces (SLIPSs) have been actively studied to improve the limitations of superhydrophobic (SHP) surfaces, especially the defects of the nonwetting chemical coating layer and the weak mechanical robustness of surface micro/nanostructures. However, the SLIPSs also have several drawbacks including volatilization and leakage of lubricant caused by long-term usage. In this study, we suggest the use of icephobic, highly transparent, and self-healing solid slippery surface to overcome the limitations of both surfaces (SLIPS and SHP) by combining specific biomimetic morphology and intrinsic properties of paraffin wax.

Deformation of Emulsion Droplet with Clean and Particle-Covered Interface under an Electric Field.

The electrohydrodynamic deformation of an emulsion droplet with a clean and particle-covered interface was explored. Here, the electrohydrodynamic deformation was numerically and experimentally demonstrated under the stimuli of moderate and strong electric fields. The numerical method involves the coupling of the Navier-Stokes equation with the level set equation of interface tracking and the governing equations of so-called leaky dielectric theory.

Identifying Fibrillization State of Aβ Protein Near-Field THz Conductance Measurement.

Progressive Alzheimer's disease is correlated with the oligomerization and fibrillization of the amyloid beta (Aβ) protein. We identify the fibrillization stage of the Aβ protein through label-free near-field THz conductance measurements in a buffer solution. Frequency-dependent conductance was obtained by measuring the differential transmittance of the time-domain spectroscopy in the THz range with a molar concentration of monomer, oligomer, and fibrillar forms of the Aβ protein.

Breakups of an encapsulated surfactant-laden aqueous droplet under a DC electric field.

We investigate the breakups of an encapsulated conducting aqueous droplet under a direct-current electric field via extensive experiments and theoretical analysis. The encapsulating shell phase and the ambient phase consist of leaky dielectric liquids. We change the surface tension by using an aqueous core with different surfactant (Tween 80) concentrations.

Fabrication, Flow Control, and Applications of Microfluidic Paper-Based Analytical Devices.

Paper-based microfluidic devices have advanced significantly in recent years as they are affordable, automated with capillary action, portable, and biodegradable diagnostic platforms for a variety of health, environmental, and food quality applications. In terms of commercialization, however, paper-based microfluidics still have to overcome significant challenges to become an authentic point-of-care testing format with the advanced capabilities of analyte purification, multiplex analysis, quantification, and detection with high sensitivity and selectivity. Moreover, fluid flow manipulation for multistep integration, which involves valving and flow velocity control, is also a critical parameter to achieve high-performance devices.

Highly Efficient Nanocarbon Coating Layer on the Nanostructured Copper Sulfide-Metal Organic Framework Derived Carbon for Advanced Sodium-Ion Battery Anode.

High theoretical capacity and low-cost copper sulfide (CuS)-based anodes have gained great attention for advanced sodium-ion batteries (SIBs). However, their practical application may be hindered due to their unstable cycling performance and problems with the dissolution of sodium sulfides (NaS) into electrolyte. Here, we employed metal organic framework (MOF-199) as a sacrificial template to fabricate nanoporous CuS with a large surface area embedded in the MOF-derived carbon network (CuS-C) through a two-step process of sulfurization and carbonization via HS gas-assisted plasma-enhanced chemical vapor deposition (PECVD) processing.