Role of intraretinal cysts in the prediction of postoperative closure and photoreceptor damages of the idiopathic full-thickness macular hole.

Background: To determine whether it would be effective in predicting the results of the postoperative full-thickness macular hole (FTMH) closure when intraretinal cyst (IRC) is present.

Methods: Case-control study. Patients with idiopathic FTMH who underwent pars plana vitrectomy with internal limiting membrane peeling were retrospectively reviewed.

Anisocoria after scopolamine transdermal patch contamination: A case report.

Rationale: We report a case of anisocoria that occurred after contamination with a scopolamine transdermal patch, and introduce a diagnostic approach for anisocoria patients.

Patient Concerns: A 35-year-old woman with no past ophthalmologic history presented to the ophthalmology department complaining of a dilated pupil in the right eye. Corrected visual acuities was 20/20 in both eyes, and the intraocular pressures were 20 and 18 mm Hg in the right and left eye, respectively.

Aqueous humor cytokine levels through microarray analysis and a sub-analysis based on optical coherence tomography in wet age-related macular degeneration patients.

Background: To identify disease-specific cytokine and growth factor profile differences in the aqueous humor between wet age-related macular degeneration (AMD) patients and age-matched controls and to correlate their levels with the optical coherence tomography (OCT) findings.

Methods: Aqueous humors were obtained from 13 wet AMD eyes and 10 control eyes. Twenty cytokines and growth factors were measured using a RayBio antibody microarray technology in wet AMD and control eyes.

Comparison of corneal endothelial cell changes after phacoemulsification between type 2 diabetic and nondiabetic patients.

The aim of this study is to compare the endothelial cell density (ECD) and morphology between diabetic mellitus (DM) and nondiabetic patients at 1 year after phacoemulsification in operated eyes and nonoperated eyes.Evaluation was performed in 28 patients (56 eyes) with type 2 diabetes and 37 patients (74 eyes) without diabetes who underwent 1-year interval cataract surgery. Using a noncontact specular microscope and Scheimpflug rotating camera, corneal parameters were analyzed before and 1 year after surgery.

Usefulness of the Components of Full-Field Electroretinography to Predict Postoperative Visual Outcomes in Patients With Epiretinal Membranes.

Purpose: To confirm the predictors of postoperative visual outcomes by performing full-field electroretinography (ffERG) before surgery in patients with epiretinal membranes (ERMs).

Methods: Sixty-one eyes of patients with ERMs who underwent pars plana vitrectomy with membrane peeling were prospectively reviewed. Correlations between preoperative data (ffERG and optical coherence tomography) and postoperative best-corrected visual acuity (BCVA) were investigated.

Sixteen-and-a-half syndrome with metastatic pons tumor: A case report.

Rationale: One-and-a-half syndrome (OAAH) is characterized as the combination of ipsilateral horizontal gaze palsy and internuclear ophthalmoplegia. OAAH syndrome accompanied with 7th and 8th cranial nerve palsy is called 16-and-a-half syndrome. We aimed to report the case of 16-and-a-half syndrome with metastatic pons tumor.

Effect of Annealing Temperature on Morphology and Electrical Property of Hydrothermally-Grown ZnO Nanorods/-Si Heterojunction Diodes.

In this study, ZnO nanorods (NRs) were synthesized using the hydrothermal method, and the effects of annealing temperature (150 °C-600 °C) on morphology, crystallinity, defects states of the NRs, and electrical property of the -type ZnO NRs/-type Si heterojunction diodes were investigated. No appreciable changes in the morphology and crystal structure of the ZnO NRs were observed with increasing annealing temperature up to 450 °C. As the temperature increased to 600 °C, the average length and diameter of the NRs decreased due to the partial melting and sintering in the NRs.

One-year survivor of adult alveolar rhabdomyosarcoma of the maxillary sinus with orbital extension: Case report.

Introduction: Rhabdomyosarcoma is uncommon in adults. Adult and maxillary rhabomyosarcoma with direct orbital extension has been rarely reported. To our knowledge, there is no reported case about adult patient with alveolar maxillary rhabdomyosarcoma and orbital extension survived 1 year with intact ocular function.

Facet Control of Subunits in Anatase TiO₂ Mesocrystal by Diethanolamine for Enhanced Photocatalytic Activity.

Controllable TiO2 architectures with different facets play a key role in the adjustment of the surface area and charge recombination efficiency in photocatalysts. In this study, we synthesized anatase TiO2 mesocrystals with diethanolamine (DEA, 0-5 mM) as a nontoxic capping agent to control the facet of subunits using hydrothermal method, and determine the effect of DEA on subunits, by-products, and consequent photocatalytic performance of TiO2 mesocrystals. The pure TiO2 was spindle-like shaped mesocrystal having bipyramidal subunits with high portion of {101} facets.

Synergistic effect of Indium and Gallium co-doping on growth behavior and physical properties of hydrothermally grown ZnO nanorods.

We synthesized ZnO nanorods (NRs) using simple hydrothermal method, with the simultaneous incorporation of gallium (Ga) and indium (In), in addition, investigated the co-doping effect on the morphology, microstructure, electronic structure, and electrical/optical properties. The growth behavior of the doped NRs was affected by the nuclei density and polarity of the (001) plane. The c-axis parameter of the co-doped NRs was similar to that of undoped NRs due to the compensated lattice distortion caused by the presence of dopants that are both larger (In) and smaller (Ga) than the host Zn cations.

Facet-controlled anatase TiO2 nanoparticles through various fluorine sources for superior photocatalytic activity.

Reactive surface-exposed anatase TiO2 (a-TiO2) is highly desirable for applications requiring superior photocatalytic activity. In order to obtain a favorable surface, morphology control of the a-TiO2 using capping agents has been widely investigated. Herein, we systematically study the effects of different F sources (HF, TiF4, and NH4F) as the capping agent on the morphology control and photocatalytic activities of a-TiO2 in a hydrothermal process.

Hydrothermally Grown In-doped ZnO Nanorods on p-GaN Films for Color-tunable Heterojunction Light-emitting-diodes.

The incorporation of doping elements in ZnO nanostructures plays an important role in adjusting the optical and electrical properties in optoelectronic devices. In the present study, we fabricated 1-D ZnO nanorods (NRs) doped with different In contents (0% ~ 5%) on p-GaN films using a facile hydrothermal method, and investigated the effect of the In doping on the morphology and electronic structure of the NRs and the electrical and optical performances of the n-ZnO NRs/p-GaN heterojunction light emitting diodes (LEDs). As the In content increased, the size (diameter and length) of the NRs increased, and the electrical performance of the LEDs improved.

Dielectric functions of solution-processed GdAlO(x)/Si films measured with vacuum ultra-violet spectroscopic ellipsometry.

The dielectric functions of amorphous GdAlO(x) (GAO) films grown by the sol-gel process were investigated from 1.12 to 8.5 eV as a function of annealing temperature using spectroscopic ellipsometry (SE).

Surface-Tunable Bioluminescence Resonance Energy Transfer via Geometry-Controlled ZnO Nanorod Coordination.

The use of ZnO nanorods (NRs) as an effective coordinator and biosensing platform to create bioluminescence resonance energy transfer (BRET) is reported. Herein, a hydrothermal approach is applied to obtain morphologically controlled ZnO NRs, which are directly bound to luciferase (Luc) and carboxy-modified quantum dot (QD) acting as a donor-acceptor pair for BRET. BRET efficiency varies significantly with the geometry of ZnO NRs, which modulates the coordination between hexahistidine-tagged Luc (Luc-His6 ) and QD, owing to the combined effect of the total surface area consisting of (001) and (100) planes and their surface polarities.

Growth behavior and electrical performance of Ga-doped ZnO nanorod/p-Si heterojunction diodes prepared using a hydrothermal method.

The incorporation of foreign elements into ZnO nanostructures is of significant interest for tuning the structure and optical and electrical properties in nanoscale optoelectronic devices. In this study, Ga-doped 1-D ZnO nanorods were synthesized using a hydrothermal route, in which the doping content of Ga was varied from 0% to 10%. The pn heterojunction diodes based on the n-type Ga-doped ZnO nanorod/p-type Si substrates were constructed, and the effect of the Ga doping on the morphology, chemical bonding structure, and optical properties of the ZnO nanorods was systematically investigated as well as the diode performance.

Fabrication of solution-processed InSnZnO/ZrO2 thin film transistors.

We fabricated InSnZnO (ITZO) thin-film transistors (TFTs) with a high-permittivity (K) ZrO2 gate insulator using a solution process and explored the microstructure and electrical properties. ZrO2 and ITZO (In:Sn:Zn = 2:1:1) precursor solutions were deposited using consecutive spin-coating and drying steps on highly doped p-type Si substrate, followed by annealing at 700 degrees C in ambient air. The ITZO/ZrO2 TFT device showed n-channel depletion mode characteristics, and it possessed a high saturation mobility of approximately 9.

The effect of sintering temperature on the microstructure and electrical performance of sol-gel-deposited SnInZnO thin film transistors.

We reported the capability of the SnInZnO (TIZO) film, fabricated using the sol-gel process, to act as a channel layer for printed electronics. We varied the sintering temperature to examine the potential of both the material and the process for application at low processing temperatures. The structure of the film sintered at 300 degrees C consisted of amorphous phase and the nanocrystalline structure began to appear locally at 400 degrees C.

Investigation of the dielectric function of solution-processed InGaZnO films using ellipsometry.

The optical properties of InGaZnO (IGZO) films grown through the sol-gel process as a function of sintering time were investigated with spectroscopic ellipsometry (SE). The IGZO precursor sol was prepared by mixing In nitrate, Ga nitrate, and Zn acetate at a molar ratio of In:Ga:Zn = 3:1:1. The solution was deposited on a SiO2/Si substrate via spin coating.

Nitrification and denitrification using biofilters packed with sulfur and limestone at a pilot-scale municipal wastewater treatment plant.

A pilot-scale municipal wastewater treatment plant composed of a fixed film activated sludge (IFAS) system with sulfur-limestone autotrophic denitrification (SLAD) was operated for a year and the influence of different operational factors was investigated. Nitrification efficiency was found to be above 91% at temperatures above 25 degrees C even at short hydraulic residence times (HRTs), but declined to 51 +/- 2% when the temperature dropped to 22 +/- 3 degrees C. The minimum HRT (HRT(min)) to achieve nitrification efficiency > 90% was found to be 12 h at temperatures above 25 degrees C.

Microstructure and dielectric characteristics of high-k tetragonal ZrO2 films with various thicknesses processed by sol-gel method.

High-k ZrO2/Si films were fabricated by a sol-gel method and the effects of the thickness of ZrO2 on the phase formation, interface chemical structure, and dielectric performance were studied. The 0.1 M precursor sol was prepared by using Zr acetylacetonate, coated, dried on Si substrates, and finally annealed at 500 degrees C.

Enhancement in the critical current density of C-doped MgB2 wire using a polyacrylic acid dopant.

C-doped MgB2 wires were fabricated from a polyacrylic acid (PAA) using a conventional in-situ PIT technique. The effects of the PAA content on the lattice parameter, microstructure, critical temperature (Tc) and critical current density (Jc) were examined. With increasing PAA content, the amount of MgO in the sample increased but the crystallinity, a-axis lattice parameter, and Tc of MgB2 wires decreased, indicating that the C that decomposed from PAA during heat treatment had substituted for B.

Isolation and characterization of Acidithiobacillus caldus from a sulfur-oxidizing bacterial biosensor and its role in detection of toxic chemicals.

A novel toxicity detection methodology based on sulfur-oxidizing bacteria (SOB) has been developed for the rapid and reliable detection of toxic chemicals in water. The methodology exploits the ability of SOB to oxidize sulfur particles in the presence of oxygen to produce sulfuric acid. The reaction results in an increase in electrical conductivity (EC) and a decrease in pH.

Accelerated metolachlor degradation in soil by zerovalent iron and compost amendments.

Soil incubation and germination tests were conducted to assess zerovalent iron (ZVI), organic compost, moisture and their combinations on metolachlor degradation in soil. The ZVI alone degraded 91% of metolachlor in soil within 40 days following bi-phasic kinetics. Organic amendment alone facilitated metolachlor degradation in soil up to 60% after 40 days depending on the amendment rate.

Lattice parameter, lattice disorder and resistivity of carbohydrate doped MgB2 and their correlation with the transition temperature.

The change in the lattice parameters or the lattice disorder is claimed as a cause of the slight reduction in the transition temperature by carbon doping in MgB2. In this work, an extensive investigation on the effects of carbohydrate doping has been carried out. It is found that not only the a-axis but also the c-axis lattice parameter increases with the sintering temperature.