Multifunctional microwave absorption materials: construction strategies and functional applications.

The widespread adoption of wireless communication technology, especially with the introduction of artificial intelligence and the Internet of Things, has greatly improved our quality of life. However, this progress has led to increased electromagnetic (EM) interference and pollution issues. The development of advanced microwave absorbing materials (MAMs) is one of the most feasible solutions to solve these problems, and has therefore received widespread attention.

Mixed-Dimensional Assembly Strategy to Construct Reduced Graphene Oxide/Carbon Foams Heterostructures for Microwave Absorption, Anti-Corrosion and Thermal Insulation.

Considering the serious electromagnetic wave (EMW) pollution problems and complex application condition, there is a pressing need to amalgamate multiple functionalities within a single substance. However, the effective integration of diverse functions into designed EMW absorption materials still faces the huge challenges. Herein, reduced graphene oxide/carbon foams (RGO/CFs) with two-dimensional/three-dimensional (2D/3D) van der Waals (vdWs) heterostructures were meticulously engineered and synthesized utilizing an efficient methodology involving freeze-drying, immersing absorption, secondary freeze-drying, followed by carbonization treatment.

Metal Valence State Modulation Strategy to Design Core@shell Hollow Carbon Microspheres@MoSe/MoO Multicomponent Composites for Anti-Corrosion and Microwave Absorption.

The exploitation of multicomponent composites (MCCs) has become the main pathway for obtaining advanced microwave absorption materials (MAMs). Herein, a metal valence state modulation strategy is proposed to tune the electromagnetic (EM) parameters and improve microwave absorption performances. Core@shell hollow carbon microspheres@MoSe and hollow carbon microspheres@MoSe/MoO MCCs with various mixed-valence states content are well-designed and produced by a simple hydrothermal reaction or/and heat treatment process.

Understanding the Behaviors of Plasmon-Induced Hot Carriers and Their Applications in Photocatalysis.

Photocatalysis driven by plasmon-induced hot carriers has been gaining increasing attention. Recent studies have demonstrated that plasmon-induced hot carriers can directly participate in photocatalytic reactions, leading to great enhancement in solar energy conversion efficiency, by improving the catalytic activity or changing selectivity. Nevertheless, the utilization efficiency of hot carriers remains unsatisfactory.

Tailoring Fluorescence-Phosphorescence Emission with a Single Nanocavity.

Realizing the dual emission of fluorescence-phosphorescence in a single system is an extremely important topic in the fields of biological imaging, sensing, and information encryption. However, the phosphorescence process is usually in an inherently "dark state" at room temperature due to the involvement of spin-forbidden transition and the rapid non-radiative decay rate of the triplet state. In this work, we achieved luminescent harvesting of the dark phosphorescence processes by coupling singlet-triplet molecular emitters with a rationally designed plasmonic cavity.

In Situ Raman Probing of Hot-Electron Transfer at Gold-Graphene Interfaces with Atomic Layer Accuracy.

Plasmonic metals under photoexcitation can generate energetic hot electrons to directly induce chemical reactions. However, the capability and fundamental insights of the transportation of these hot electrons at plasmonic metal-2D material interfaces remain unclear. Herein, hot-electron transfer at Au-graphene interfaces has been in situ studied using surface-enhanced Raman spectroscopy (SERS) with atomic layer accuracy.

Gap-Mode Surface-Plasmon-Enhanced Photoluminescence and Photoresponse of MoS.

2D materials hold great potential for designing novel electronic and optoelectronic devices. However, 2D material can only absorb limited incident light. As a representative 2D semiconductor, monolayer MoS can only absorb up to 10% of the incident light in the visible, which is not sufficient to achieve a high optical-to-electrical conversion efficiency.

In situ SERS study of surface plasmon resonance enhanced photocatalytic reactions using bifunctional Au@CdS core-shell nanocomposites.

Surface plasmon resonance (SPR) has been utilized in many fields, such as surface-enhanced Raman spectroscopy (SERS) and solar energy conversion. Here we developed an Au@CdS core-shell nanostructure, a bifunctional nanoparticle, used as an efficient catalyst for SPR enhanced photocatalytic degradation, and as a substrate for in situ SERS detection of methylene blue (MB) and p-nitrophenol (pNTP). With integration of an Au nanoparticle into a CdS shell, the degradation process was significantly accelerated under 500 nm long-pass (λ > 500 nm) visible light irradiation, which was caused by the injection of hot electrons.

[Operation Performance of a Bioaugmented Membrane-aerated Biofilm Reactor Treating Atrazine Wastewater].

A hydrophobic SPG (shirasu porous glass) membrane-aerated biofilm reactor (MABR) with genetically engineered microorganism (GEM) biofilm formed on the SPG membrane surface was applied to treat atrazine wastewater. The contaminant removal performance and its influencing factors were investigated during the stable operation of this MABR. The results indicated that the oxygen supply capacity could be increased in the SPG membrane aeration when the membrane pore size and the aeration pressure increased, which could improve the performance of COD and atrazine removals.

[Characteristics of acid red 3R wastewater treatment by ozone microbubbles].

The application of microbubble technology for ozonation wastewater treatment could enhance ozone mass transfer, improve ozonation performance and increase ozone utilization efficiency. The ozone microbubbles were used to treat synthetic acid red 3R wastewater in the present study, and compared to ozone conventional bubbles. The ozone mass transfer and ozonation characteristics of acid red 3R were investigated when ozone microbubbles and ozone conventional bubbles were applied.

[Atrazine wastewater treatment in a SPG membrane-aerated genetically engineered microorganism biofilm reactor].

Membrane-aerated biofilm reactor (MABR) represent a novel membrane-biological wastewater treatment technology. In addition, bioaugmented treatment using genetically engineered microorganism (GEM) biofilm in MABR is proposed to improve refractory pollutant removal. In the present study, a SPG membrane aerated-biofilm reactor (SPG-MABR) with GEM biofilm formed on the SPG membrane surface was applied to treat atrazine wastewater.

[Enhanced electro-catalytic oxidation of dye wastewater with FePMo12 adopted catalyst].

Electrochemical oxidation degradation of azo dyes has become a widely used method in recent years. Iron phosphomolybdate (FePMo12) was synthesized with molybdophosphoric acid and ferric salt. Morphology and microstructure of catalyst were chararerized by IR spectrometry and X-ray diffraction.

[Enhanced electro-chemical oxidation of Acid Red 3R solution with phosphotungstic acid supported on gamma-Al2O3].

Supported phosphotungstic acid catalysts on gamma-Al2O3 (HPW/gamma-Al2O3) were prepared by solution impregnation and characterized by FTIR, XRD, TG-DTA and SEM. The heteropolyanion shows a Keggin structure. Electro-chemical oxidation of Acid Red 3R was investigated in the presence of HPW supported on gamma-Al2O3 as packing materials in the reactor.

[Biocatalyst of redox mediators on the denitrification by Paracoccus versutus strain GW1].

The quinone respiration process of Paracoccus versutus strain GW1 was characterized and the effects of the four redox mediators on the denitrification process were studied. The experiment results suggested that quinones were utilized by Paracoccus versutus strain GW1 as electron acceptors in the respiratory chain and reduced to hydroquinone. Batch experiments were carried out to investigate the biocatalyst effect of redox mediators as catalyst on the denitrification process at 35 degrees C.

[Analysis of methanogenic community of anaerobic granular sludge based on mcrA gene].

The methanogenic community in anaerobic granular sludge from a full-scale UASB treating avernectin wastewater was analyzed based on mcrA gene, compared to 16S rRNA gene. The results indicated that the diversity indices of methanogenic community, including Shannon diversity index, Margalef richness index and Berger-Parker dominance index, were no difference between mcrA gene-based and 16S rRNA gene-based PCR products analysis by DGGE, although their DGGE band patterns were different, implying that the diversity analysis of methanogenic community based on mcrA genes was consistent with 16S rRNA gene. The phylogenetic analysis of dominant methanogenic populations based on these two target genes also showed resemble and Methanobacteriales and Methanosarcinales were determined to be the main orders of methanogenic populations in anaerobic granular sludge.

[Catalyst effect and the structure-activity characteristics of redox mediators on the reactive brilliant red K-2BP decolorization].

Four selected quinone redox mediators with similar structure were conducted to accelerate reactive brilliant red K-2BP decolorization, and the accelerating structure-activity of redox mediators on the decolorization was also studied. Batch experiments were carried out to determine the catalyst effect on the decolorization of reactive brilliant red K-2BP with temperature of 35 degrees C and under anaerobic conditions. The experiment results suggested that (1) four similar chemical structure redox mediators [1, 4, 5, 8-Tetrachloroanthraquinone (1,4,5,8-AQ), Anthraquinone (AQ), 1,8-Dichloroanthraquinone (1,8-AQ), 1,5-Dichloroanthraquinone (1,5-AQ)], all accelerated the decolorization rate of reactive brilliant red K-2BP and the reaction rate was enhanced 1.

[Bioaugmented treatment of atrazine by genetically engineered microorganism in different bioreactors].

Removal of atrazine was investigated when genetically engineered microorganism (GEM) was inoculated into membrane bioreactor (MBR) and hybrid bioreactor for bioaugmentation. The performances of atrazine removal in two bioreactors were explored. The variations of GEM density and atzA gene abundance in two bioreactors were also determined.

[Analysis of methanogenic community of anaerobic granular sludge in a full-scale UASB treating avermectin wastewater].

Methanogens is considered to be important functional microbial population in anaerobic granular sludge. Fluorescence in situ hybridization was used to analyze methanogens of anaerobic granular sludge in a full-scale UASB treating avermectin wastewater. The results indicated that the distribution forms of methanogens, Methanobacteriales and Methanosarcinales were identical on the surface and inner face of granular sludge samples in different formation stages (with different diameters) , although the relative abundances of these methanogens were different.

In vitro drug release behavior from a novel thermosensitive composite hydrogel based on Pluronic f127 and poly(ethylene glycol)-poly(epsilon-caprolactone)-poly(ethylene glycol) copolymer.

Background: Most conventional methods for delivering chemotherapeutic agents fail to achieve therapeutic concentrations of drugs, despite reaching toxic systemic levels. Novel controlled drug delivery systems are designed to deliver drugs at predetermined rates for predefined periods at the target organ and overcome the shortcomings of conventional drug formulations therefore could diminish the side effects and improve the life quality of the patients. Thus, a suitable controlled drug delivery system is extremely important for chemotherapy.

[Leakage and survival of genetically engineered microorganism in the environment applied for wastewater bioaugmentation treatment].

Genetically engineered microorganism (GEM) leaking from bioreactors to natural environment will lead to potential ecological risk when applied for wastewater bioaugmentation treatment. An atrazine-degrading GEM was used in a conventional activated sludge bioreactor (CAS) and a membrane bioreactor (MBR) to investigate leaking density of GEM. in the effluent.

One-step preparation of poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) nanoparticles for plasmid DNA delivery.

In this article, a kind of biodegradable poly(epsilon-caprolactone)-Poly(ethylene glycol)-poly(epsilon-caprolactone) (PCL-PEG-PCL, PCEC) copolymer was synthesized by ring-opening polymerization method. The PCEC nanoparticles were prepared at one-step by modified emulsion solvent evaporation method using CTAB as stabilizer. With increase in PCEC concentration, the particle size increased obviously, but zeta potential only increased slightly.