Production mechanism of high-quality carbon black from high-temperature pyrolysis of waste tire.

High-temperature pyrolysis of waste tires is a promising method to produce high-quality carbon black. In this study, carbon black formation characteristics were investigated during tire pyrolysis at 1000-1300 °C with residence times of < 1 s, 1-2 s, and 2-4 s. It is shown that with temperature increasing from 1000 °C to 1300 °C carbon black yield was increased from 10% to 27% with residence times of 2-4 s.

[Preparation of MgO Modified Lotus Shell Biochar and Its Phosphorus Adsorption Characteristics].

To study the potential application characteristics of biochar as a phosphate adsorbent, nano-MgO-biochar was prepared by rapid pyrolysis of a mixture of MgO and lotus shells. The physicochemical properties were characterized by XRD, BET, SEM, and TEM, and adsorption experiments were conducted. The results showed that MgO was mainly supported on the surface of carbon in the form of flakes and granules, which increased the adsorption active site, and the adsorption amount of MgO-biochar MBC3 was 14 times higher than that of biochar MBC1 without MgO.

Effects of biomass pyrolysis derived wood vinegar (WVG) on extracellular polymeric substances and performances of activated sludge.

The effects of wood vinegar (WVG) on extracellular polymeric substances (EPS), and flocculation, sedimentation and dewatering performances of activated sludge were investigated in sequencing batch reactor (SBR) process. Results showed that polysaccharide (PS) and DNA were accounted for the largest and smallest proportion of EPS, respectively. With WVG injection, productions of soluble EPS (S-EPS), loosely bound EPS (LB-EPS), tightly bound EPS (TB-EPS), protein (PN), PS, and DNA were significantly increased.

[Adsorption mechanism of furfural onto modified rice husk charcoals].

To evaluate the absorptive characteristics of furfural onto biomass charcoals derived from rice husk pyrolysis, we studied the information of the structure and surface chemistry properties of the rice husk charcoals modified by thermal treatment under nitrogen and carbon dioxide flow and adsorption mechanism of furfural. The modified samples are labeled as RH-N2 and RH-CO2. Fresh rice husk charcoal sample (RH-450) and modified samples were characterized by elemental analysis, nitrogen adsorption-desorption isotherms, Fourier-transform infrared spectroscopy and Boehm titration.