Mixed dimensional assembly of biodegradable and antifouling wood-based covalent organic framework composite membranes for rapid and efficient dye/salt separation.

Manipulating materials of different dimensions into heterogeneous nanofiltration membranes with unique physicochemical properties and molecular sieving channels provides an effective way for accurate and fast molecular separation. Here we introduce a heterogeneous structure hybrid connection strategy to fabricate biodegradable wood-based covalent organic framework (COF) composite membranes. As a proof of concept, 3D Picea jezoensis (Siebold & Zucc.

Study on the Preparation and Process Parameter-Mechanical Property Relationships of Carbon Fiber Fabric Reinforced Poly(Ether Ether Ketone) Thermoplastic Composites.

Carbon fiber fabric-reinforced poly(ether ether ketone) (CFF-PEEK) composites exhibit exceptional mechanical properties, and their flexibility and conformability make them a promising alternative to traditional prepregs. However, the formation of the CFF-PEEK composite is trapped in the high viscosity of PEEK, the smooth surface, and tightly interwoven bundles of CFF. It is more difficult for the resin to flow through the fibers of complex textile structures.

Agomir-122-loaded nanoparticles coated with cell membrane of activated fibroblasts to treat frozen shoulder based on homologous targeting.

As a common musculoskeletal disorder, frozen shoulder is characterized by thickened joint capsule and limited range of motion, affecting 2-5% of the general population and more than 20% of patients with diabetes mellitus. Pathologically, joint capsule fibrosis resulting from fibroblast activation is the key event. The activated fibroblasts are proliferative and contractive, producing excessive collagen.

Development of novel ionic covalent organic frameworks composite nanofiltration membranes for dye/salt separation.

Covalent organic frameworks (COF) have desirable properties such as high porosity, low mass density, excellent heat resistance and regulatable structure, making them an ideal candidate for membrane material. Traditional methods for preparing covalent organic framework composite membranes, such as interfacial polymerization, vacuum filtration, and covalent organic framework abrasive coating. Stand-alone COF membranes produced by the above methods usually suffer from problems such as poor mechanical properties.

A hemostatic sponge derived from chitosan and hydroxypropylmethylcellulose.

Hemostatic materials are of great significance for rapid control of bleeding, especially in military trauma and traffic accidents. Chitosan (CS) hemostatic sponges have been widely concerned and studied due to their excellent biocompatibility. However, the hemostatic performance of pure chitosan sponges is poor due to the shortcoming of strong rigidity.

Adhesive injectable cellulose-based hydrogels with rapid self-healing and sustained drug release capability for promoting wound healing.

Injectable biocompatible hydrogels with multiple functions, including self-healing, adhesion, antibacterial activity, and suitable mechanical properties, are highly desirable for enhancing wound healing. In this study, a new class of multi-functional injectable self-healing cellulose-based hydrogels was synthesised using dynamic covalent acylhydrazone linkages for wound dressing. The carboxymethyl cellulose-graft-adipic dihydrazide (CMC-ADH)/4-Formylbenzoic acid-terminated poly(ethylene glycol) (PEG-FBA) (CMC-ADH/PEG-FBA) hydrogels have adjustable gelation time and excellent self-healing ability.

InSitu Integrated Fabrication for Multi-Interface Stabilized and Highly Durable Polyaniline@Graphene Oxide/Polyether Ether Ketone Special Separation Membranes.

Special separation membranes are widely employed for separation and purification purposes under challenging operating conditions due to their low energy consumption, excellent solvent, and corrosion resistance. However, the development of membranes is limited by corrosion-resistant polymer substrates and precise interfacial separation layers. Herein, polyaniline (PANI) is employed to achieve insitu anchoring of multiple interfaces, resulting in the fabrication of polyaniline@graphene oxide/polyether ether ketone (PANI@GO/PEEK) membranes.

Arthroscopic Repair for the Anterior Horn of the Lateral Meniscus With Suture Anchor.

The anterior horn tear of the lateral meniscus, often accompanied with local parameniscal cysts, is usually managed by cysts debridement and meniscus repair with the outside-in technique (OIT). However, a big gap between the meniscus and anterior capsule would be produced after cysts debridement and be difficult to be closed by the OIT. Or, the OIT would result in knee pain because of the overly tight knots.

Semi-crystalline sulfonated poly(ether ketone) proton exchange membranes: The trade-off of facile synthesis and performance.

Improving the performance of proton exchange membranes (PEMs) through the synthesis of sulfonated polymers with elaborate molecular structures has received extensive approval. However, the tedious synthetic process and consequently high costs restrain their possible substitution for Nafion, a classic PEM material. Herein, a series of semi-crystalline sulfonated poly(ether ketone)s with fluorene-based units were prepared via direct copolymerization of commercially available monomers and followed post-sulfonation, namely SPEK-FD-x, where × represents the molar ratio of the fluorene-containing monomer to the employed bisphenol monomers.

Development of a zinc(II) 2-pyridinecarboxaldehyde thiosemicarbazone complex with remarkable antitumor and antiangiogenic activities.

To develop the next-generation metal agents for efficiently inhibiting tumor growth, we synthesized a series of new Zn(II) complexes (C1-C5) derived from 2-pyridinecarboxaldehyde thiosemicarbazone and investigated their structure-activity relationships. C5 bearing two methyl groups at the N-4 position of the ligand exerted the strongest inhibition effect among all the Zn(II) complexes. Importantly, C5 exerted an effective inhibitory effect on tumor growth and produced few side effects .

Self-Adhesive and Conductive Dual-Network Polyacrylamide Hydrogels Reinforced by Aminated Lignin, Dopamine, and Biomass Carbon Aerogel for Ultrasensitive Pressure Sensor.

Conductive hydrogels have attracted extensive interest owing to its potential in soft robotics, electronic skin, and human monitoring. However, insufficient mechanical properties, lower adhesivity, and unsatisfactory conductivity seriously hinder potential applications in this emerging field. Herein, a highly elastic conductive hydrogel with a combination of favorable mechanical properties, self-adhesiveness, and excellent electrical performance was achieved by the synergistic effect of aminated lignin (AL), polydopamine (PDA), polyacrylamide (PAM) chains, and biomass carbon aerogel (C-SPF).

Preparation of rigid polyurethane foam from lignopolyol obtained through mild oxypropylation.

Lignin, one of the main components of lignocellulose, can be used as an alternative to chemical polyols in the production of polyurethane because of its abundant phenolic and alcohol hydroxyls. Traditionally, lignin is directly applied in the preparation of polyurethane; however, modified lignin has been proved to be superior, especially that obtained by the oxypropylation reaction. Therefore, lignopolyol obtained by mild and efficient oxypropylation was utilized in the production of rigid polyurethane foam in this study.

Stretchable and conductive cellulose hydrogel electrolytes for flexible and foldable solid-state supercapacitors.

In this study, the anti-freezing conductive hydrogel electrolytes with outstanding mechanical properties were synthesized by a facile and feasible method. The mechanical and anti-freezing properties of the synthesized polyacrylamide/lithium lhloride/water soluble cellulose acetate (PAM/LiCl/WSCA) hydrogels are significantly enhanced with the addition of WSCA and LiCl. The tensile strength and toughness of the gels were gradually increased to 341 KPa and 1.

A Docking Mechanism Based on a Stewart Platform and Its Tracking Control Based on Information Fusion Algorithm.

Aiming at the problem of unmanned reconfiguration and docking of ground vehicles under complex working conditions, we designed a piece of docking equipment composed of an active mechanism based on a six-degree-of-freedom platform and a locking mechanism with multi-sensors. Through the proposed control method based on laser and image sensor information fusion calculation, the six-dimensional posture information of the mechanism during the docking process is captured in real time so as to achieve high-precision docking. Finally, the effectiveness of the method and the feasibility of the 6-DOF platform are verified by the established model.

Construction of antifouling zwitterionic membranes by facile multi-step integration method.

Membrane fouling during the use of separation membrane has always been the main reason for the degradation of membrane performance. The traditional solution is complicated and inefficient, so we proposed multi-step integration method to prepare antifouling zwitterionic poly(aryl ether sulfone) (PAES-Z-x) ultrafiltration (UF) membrane with higher efficiency. We designed and synthesized a bisphenol precursor containing tertiary amine groups, which could provide reactive sites for grafting zwitterionic group.

Based On Confined Polymerization: In Situ Synthesis of PANI/PEEK Composite Film in One-Step.

Confined polymerization is an effective method for precise synthesis, which can further control the micro-nano structure inside the composite material. Polyaniline (PANI)-based composites are usually prepared by blending and original growth methods. However, due to the strong rigidity and hydrogen bonding of PANI, the content of PANI composites is low and easy to agglomerate.

Corrigendum to Robust sulfonated poly (ether ether ketone) nanochannels for high-performance osmotic energy conversion.

[This corrects the article DOI: 10.1093/nsr/nwaa057.].

ZnO Nanoneedle-Modified PEEK Fiber Felt for Improving Anti-fouling Performance of Oil/Water Separation.

Membrane separation has been considered to be the most effective decontamination method for oily waste water. The most significant point of membrane separation is the resistance against membrane fouling. Fabricating hierarchical architectures on the membrane surface is an available approach to improving its anti-fouling property.

Side-Chain-Type Anion Exchange Membranes Based on Poly(arylene ether sulfone)s Containing High-Density Quaternary Ammonium Groups.

To obtain anion exchange membranes with both high ionic conductivity and good dimensional stability, a series of side-chain-type poly(arylene ether sulfone)s (PAES-QDTPM-) were designed and synthesized. Quaternary ammonium (QA) groups were densely aggregated and grafted onto the main chain via flexible hydrophobic spacers. Well-defined microphase separation was confirmed by small-angle X-ray scattering.

Aggregation-Induced Emission Molecule Microwire-Based Specific Organic Vapor Detector through Structural Modification.

An optical organic vapor sensor array based on colorimetric or fluorescence changes quantified by spectroscopy provides an efficient method for realizing rapid identification and detection of organic vapor, but improving the sensitivity of the optical organic vapor sensor is challenging. Here, AIE/polymer (AIE, ggregation-induced emission) composites into microwires arrays are fabricated as organic vapor sensors with specific recognition and high sensitivity for different vapors using the capillary-bridge-mediated assembly method. Such organic vapor sensor successfully detects organic vapor relying on a swelling-induced fluorescence change of the AIE/polymer composites, combating the unique property of AIE molecules and vapor absorption-induced polymer swelling.

Durable and chemical resistant ultra-permeable nanofiltration membrane for the separation of textile wastewater.

It is highly challenging to prepare durable and chemical resistant ultra-permeable membranes that can quickly separate small organic molecules like dye or inorganic salt in the complex textile wastewater industry. Here, side-chain sulfonated poly(ether ether ketone) (SPEEK) was synthesized and prepared the poly(ether ether ketone) (PEEK) - SPEEK nanofiltration (NF) membrane by a simple dipping coating and heat treatment. Single component filtration tests of the optimized membrane showed ultrahigh pure water flux (126 Lm h bar) and relatively low NaCl rejection (6.

Robust sulfonated poly (ether ether ketone) nanochannels for high-performance osmotic energy conversion.

The membrane-based reverse electrodialysis (RED) technique has a fundamental role in harvesting clean and sustainable osmotic energy existing in the salinity gradient. However, the current designs of membranes cannot cope with the high output power density and robustness. Here, we construct a sulfonated poly (ether ether ketone) (SPEEK) nanochannel membrane with numerous nanochannels for a membrane-based osmotic power generator.

A novel way for high value-added application of lignosulfonate: Producing lignosulfonate nanosheets/graphene ultrathin film electrodes for electrochemical capacitors.

In this paper, a novel way for high value-added application of lignosulfonate is presented. In this study, we use lignosulfonate nanosheets to fabricate a free-standing, binder-free, ultrathin and light-weight conductive film electrode via vacuum filtration method. The results show that LS is a promising candidate material for the preparation of electrochemical capacitor film electrode.

Skin-inspired cellulose conductive hydrogels with integrated self-healing, strain, and thermal sensitive performance.

In this study, a versatile cellulose conductive hydrogels with outstanding mechanical properties, rapid self-healing performance, and excellent thermal sensitivity were successfully fabricated. The tensile strength and toughness of the gels gradually increased to 249 kPa and 1.57 MJ/m, respectively, and the healing efficiency of the hydrogels quickly reached 96.

Adventitious shoot organogenesis from leaf explants of Portulaca pilosa L.

This study established, for the first time, shoot proliferation and plant regeneration protocols via shoot organogenesis from leaf explants of a medical and ornamental plant, Portulaca pilosa L. The optimal proliferation of axillary shoots was 6.2-fold within 30 days on Murashige and Skoog (MS) medium supplemented with 3.