Giant Piezoelectric Coefficient of Polyvinylidene Fluoride with Rationally Engineered Ultrafine Domains Achieved by Rapid Freezing Processing.

Domains play an essential role in determining the piezoelectric properties of polymers. The conventional method for achieving ultrafine piezoelectric domain structures for polymers is multiphase polymerization, which is not the primary choice for industrial-scale applications because of its complex synthesis and weak mechanical properties. In this study, it is demonstrated for the first time that a nanoscale domain design can be achieved in a commercially available polyvinylidene fluoride (PVDF) homopolymer through a simple fabrication method involving cyclic compression and rapid freezing.

Visible-light-mediated deoxygenative transformation of 1,2-dicarbonyl compounds through energy transfer process.

Through the energy transfer process, mild transformations can be achieved that are often difficult to realize under thermodynamic conditions. Herein, a visible-light-driven deoxygenative coupling of 1,2-dicarbonyl compounds for C-O, C-S, and C-N bonds construction is developed via triplet state 1,2-dicarbonyls, affording a wide range of α-functionalized ketones/esters under transition-metal and external photocatalyst free conditions. The usefulness of this method is demonstrated by gram-scale synthesis, late-stage functionalization of various carboxylic acid drugs, and the synthesis of natural products and drug molecules.

Superhydrophobic Magnetic-Driven Reactor for Microliter Droplet Reaction Interface Visualization.

The development of an efficient, convenient, and cost-effective droplet-driven reactor to observe the reaction microphenomenon is crucial for investigating the chemical reaction and synthesis mechanisms. Herein, an efficient and economical strategy by combining micro-extrusion compression molding (μ-ECM) and surface modification was proposed to fabricate a superhydrophobic magnetic-driven reactor (SMDR) for microliter droplet reaction interface visualization. The wall-like array microstructures with favorable geometric uniformity and the nano-SiO coating with uniform dispersion endow the SMDR with robust superhydrophobicity, featuring a contact angle of 159.

Highly Tribo-Positive Nylon-11 Film Fabricated by Multiscale Structural Regulation through a Roll-to-Roll Processing.

Triboelectric polymers have attracted extensive attention due to their great electron-accepting and electron-donating properties in contact electrification as well as their flexible and low-cost merits and have become promising electrode materials in triboelectric nanogenerators (TENGs). However, most research has exclusively focused on improving the electron capture capability of the triboelectric layer, neglecting to enhance the electron-donating capability, which leads to a low output performance of TENG and limits its practical application. In this study, we developed a method to fabricate highly tribo-positive Nylon-11 film through roll-to-roll processing.

Self-poled piezoelectric polymer composites via melt-state energy implantation.

Lightweight flexible piezoelectric polymers are demanded for various applications. However, the low instinctively piezoelectric coefficient (i.e.

Acid-Doped Pyridine-Based Polybenzimidazole as a Positive Triboelectric Material with Superior Charge Retention Capability.

The energy conversion efficiency of a triboelectric nanogenerator (TENG) is severely limited by the charge density of triboelectric materials, while drastic and unavoidable charge decay happens during contact due to the insufficient charge retention capacity of positive triboelectric materials. Here, elaborately synthesized acid-ion-doped pyridine-based polybenzimidazole processing with strong charge retention capability is demonstrated to couple with negatively corona-polarized electrets. As illustrated by thermal stimulation and an ion mass spectrometer, the formation of acid-ion chimerism processes high activation energy for stored charges, and the selective anion migration can compensate the escape of polarized charge.

Strengthening-toughening pure poly(lactic acid) with ultra-transparency through increasing mesophase promoted by elongational flow field.

Poly(lactic acid) (PLA), as a biodegradable material, finds wide applications in packaging, automotive, and biological industries. However, achieving high strength, toughness, ultra-transparency, and heat resistance simultaneously in pure PLA through continuous one-step manufacturing remains a significant challenge. In this study, we addressed this challenge by utilizing the eccentric rotor extruder (ERE) in combination with cooling rolls to manufacture PLA sheets with outstanding mechanical performance.

Water evaporation induced in-situ interfacial compatibilization for all-natural and high-strength straw-fiber/starch composites.

In this paper, we proposed a novel and green strategy based on water evaporation induced in-situ interfacial compatibilization (WEIC) mechanism for fabricating high-strength and all-natural lignocellulose/starch composites. This mechanism exploits the natural compatibility of the lignocellulose and starch and was tested through an internal mixing process with regulated water evaporation. Specifically, we revealed that a restrained layer was in-situ formed at the interface of the lignocellulose and starch during the internal mixing process; a faster water evaporation rate thickens this restrained layer, restricts the starch's molecular movement and significantly increases the composite's mechanical properties.

Efficient fabrication of tilt micro/nanopillars on polypropylene surface with robust superhydrophobicity for directional water droplet rebound.

The directional rebound and transport of water droplets plays an important role in microfluidic devices, anti-fogging, and water harvesting. Herein, an extrusion compression molding and directional stretch demolding method was used to prepare a polypropylene (PP) surface with tilt micro/nanopillars with a contact angle of 157 ± 3°. The rolling angle is the highest (9 ± 4°) when the direction of rotation is opposite the tilt direction of the micro/nanopillars, showing excellent water repellency and anisotropy of the surface.

Fabrication of triboelectric polymer films via repeated rheological forging for ultrahigh surface charge density.

Triboelectric polymer with high charge density is the foundation to promote the wide range of applications of triboelectric nanogenerators. This work develops a method to produce triboelectric polymer based on repeated rheological forging. The fluorinated ethylene propylene film fabricated by repeated forging method not only has excellent mechanical properties and good transmittance, but also can maintain an ultrahigh tribo-charge density.

Layer-by-Layer Assembly of Multifunctional NR/MXene/CNTs Composite Films with Exceptional Electromagnetic Interference Shielding Performances and Excellent Mechanical Properties.

With the rapid advance of electronics, the light, flexible, and multifunctional composite films with high electromagnetic interference (EMI) shielding effectiveness and excellent thermal management are highly desirable for next-generation portable and wearable electronic devices. Herein, a series of flexible and ultrathin natural rubber/MXene/carbon nanotubes (NR/MXene/CNTs) composite films with sandwich structure are constructed layer by layer through a facile vacuum-assisted filtration method for EMI shielding and Joule heating application. The fabricated NR/MXene/CNTs-50 composite film, with NR/MXene as inner layer and NR/CNTs as out layers, not only has high EMI shielding efficiency, but also has excellent comprehensive mechanical properties at the thickness of only 200 µm.

One-step laser etching of a bionic hierarchical structure on a silicone rubber surface with thermal and acid/alkali resistance and tunable wettability.

Superhydrophobic silicone rubbers with robust physical and chemical stability have promising application potential in the field of flexible electronics. A one-step laser etching strategy is proposed for successfully fabricating superhydrophobic silicone rubbers with bioinspired hierarchical micro/nanostructures. Regular and dense micro/nano spheres gradually accumulate on the modified silicone rubber surface with the increase of laser etching cycles.

Cost-Effective Fabrication of Micro-Nanostructured Superhydrophobic Polyethylene/Graphene Foam with Self-Floating, Optical Trapping, Acid-/Alkali Resistance for Efficient Photothermal Deicing and Interfacial Evaporation.

Solar evaporation is one of the most attractive and sustainable approaches to address worldwide freshwater scarcity. Unfortunately, it is still a crucial challenge that needs to be confronted when the solar evaporator faces harsh application environments. Herein, a promising polymer molding method that combines melt blending and compression molding, namely micro extrusion compression molding, is proposed for the cost-effective fabrication of lightweight polyethylene/graphene nanosheets (PE/GNs) foam with interconnected vapor escape channels and surface micro-nanostructures.

Ultrafast Fabrication of Graphene-Reinforced Nanocomposites via Synergy of Steam Explosion and Alternating Convergent-Divergent Flow.

Producing high-quality graphene and polymer/graphene nanocomposite is facing the problems of complex procedure, low efficiency, and serious resource waste. To explore a new fabrication approach with high efficiency and low cost is crucial for solving these technical issues, which becomes a current research hotspot and also a great challenge. Herein, a one-step melt mixing strategy based on the synergy of steam explosion and alternating convergent-divergent flow, is innovatively developed to fabricate high-density polyethylene (HDPE)/graphene nanocomposites using industrial-grade expanded graphite (EG) without chemical agents and complex procedures.

Constructing Bone-Mimicking High-Performance Structured Poly(lactic acid) by an Elongational Flow Field and Facile Annealing Process.

Poly(lactic acid) (PLA) as one of the most promising biodegradable polymers is being tremendously restricted in large-scale applications by the notorious toughness, ductility, and heat distortion resistance. Manufacturing PLA with excellent toughness, considerable ductility, balanced strength, and great heat distortion resistance simultaneously is still a great challenge. Natural structural materials usually possess excellent strength and toughness by elaborately constructed sophisticated hierarchical architectures, however, completely reproducing natural structural materials' architecture have evidenced to be difficult.

Phase Morphology and Performance of Supertough PLA/EMA-GMA/ZrP Nanocomposites Prepared through Reactive Melt-Blending.

Nanofiller zirconium phosphate (ZrP) and ethylene-methyl acrylate-glycidyl methacrylate copolymer (EMA-GMA) were introduced into poly(lactic acid) (PLA) through reactive melt-blending method to improve its toughness. The impact strength of PLA/EMA-GMA/ZrP (82/15/3) nanocomposites was improved about 22 times that of pure PLA to 65.5 kJ/m.

Super-Toughened Poly(lactic Acid) with Poly(ε-caprolactone) and Ethylene-Methyl Acrylate-Glycidyl Methacrylate by Reactive Melt Blending.

In recent years, poly(lactic acid) (PLA) has attracted more and more attention as one of the most promising biobased and biodegradable polymers. However, the inherent brittleness significantly limits its wide application. Here, ternary blends of PLA, poly(ε-caprolactone) (PCL) with various amounts of ethylene-methyl acrylate-glycidyl methacrylate (EMA-GMA) terpolymer were fabricated through reactive melt blending in order to improve the toughness of PLA.

An Effective On-line Polymer Characterization Technique by Using SALS Image Processing Software and Wavelet Analysis.

This paper describes an effective on-line polymer characterization technique by using small-angle light-scattering (SALS) image processing software and wavelet analysis. The phenomenon of small-angle light scattering has been applied to give information about transparent structures on morphology. Real-time visualization of various scattered light image and light intensity matrices is performed by the optical image real-time processing software for SALS.