Novel Food and Beverages: Production and Characterization.

In today's market, the pursuit of product optimization is not just a trend but a necessity while facing the challenges of supplying a wider range of products, sustainability pressures, and the requirement for continuous innovation [...

A Thermoresponsive injectable drug delivery system of chitosan/β-glycerophosphate with gellan gum/alginate microparticles.

The development of new Drug Delivery Systems (DDS) by incorporating microparticles within hydrogels can prolong the release rate of drugs and/or other bioactive agents. In this study, we combined gellan gum/alginate microparticles within a thermoresponsive chitosan (Ch) hydrogel with β-Glycerophosphate (β-GP), designing the system to be in the sol state at 21 °C and in the gel state at 37 °C to enable the injectability of the system. The system was in the sol state between 10 °C and 21 °C.

Effect of different crosslinking agents on hybrid chitosan/collagen hydrogels for potential tissue engineering applications.

Tissue engineering (TE) demands scaffolds that have the necessary resistance to withstand the mechanical stresses once implanted in our body, as well as excellent biocompatibility. Hydrogels are postulated as interesting materials for this purpose, especially those made from biopolymers. In this study, the microstructure and rheological performance, as well as functional and biological properties of chitosan and collagen hydrogels (CH/CG) crosslinked with different coupling agents, both natural such as d-Fructose (F), genipin (G) and transglutaminase (T) and synthetic, using a combination of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride with N-hydroxysuccinimide (EDC/NHS) will be assessed.

Biodegradable Fiber-Reinforced Gluten Biocomposites for Replacement of Fossil-Based Plastics.

Biocomposites based on wheat gluten and reinforced with carbon fibers were produced in line with the strive to replace fossil-based plastics with microplastic-free alternatives with competing mechanical properties. The materials were first extruded/compounded and then successfully injection molded, making the setup adequate for the current industrial processing of composite plastics. Furthermore, the materials were manufactured at very low extrusion and injection temperatures (70 and 140 °C, respectively), saving energy compared to the compounding of commodity plastics.

Injectable Thermoresponsive Microparticle/Hydrogel System with Superparamagnetic Nanoparticles for Drug Release and Magnetic Hyperthermia Applications.

Cancer is a disease that continues to greatly impact our society. Developing new and more personalized treatment options is crucial to decreasing the cancer burden. In this study, we combined magnetic polysaccharide microparticles with a Pluronic thermoresponsive hydrogel to develop a multifunctional, injectable drug delivery system (DDS) for magnetic hyperthermia applications.

Porous Thermoformed Protein Bioblends as Degradable Absorbent Alternatives in Sanitary Materials.

Protein-based porous absorbent structures can be processed and assembled into configurations suitable for single-use, biodegradable sanitary materials. In this work, a formulation based on a mixture of proteins available as industrial coproducts is processed into continuous porous structures using extrusion and assembled using conventional thermal methods. The experimental design led to formulations solely based on zein-gluten protein bioblends that could be manufactured as liquid absorbent pellets, compressed pads, and/or porous films.

Valorization of Honduran Agro-Food Waste to Produce Bioplastics.

The development of biodegradable plastics and eco-friendly biomaterials derived from renewable resources is crucial for reducing environmental damage. Agro-industrial waste and rejected food can be polymerized into bioplastics, offering a sustainable solution. Bioplastics find use in various industries, including for food, cosmetics, and the biomedical sector.

Stabilization and Valorization of Beer Bagasse to Obtain Bioplastics.

Beer bagasse is a residue produced in large quantities, though it is undervalued in the industry. Its high protein and polysaccharide content make it attractive for use in sectors such as the manufacture of bioplastics. However, its high water content makes it necessary to stabilize it before being considered as a raw material.

Effect of Calcination Temperature and Time on the Synthesis of Iron Oxide Nanoparticles: Green vs. Chemical Method.

Nowadays, antioxidants and antibacterial activity play an increasingly vital role in biosystems due to the biochemical and biological reactions that involve free radicals and pathogen growth, which occur in many systems. For this purpose, continuous efforts are being made to minimize these reactions, including the use of nanomaterials as antioxidants and bactericidal agents. Despite such advances, iron oxide nanoparticles still lack knowledge regarding their antioxidant and bactericidal capacities.

Soy Protein Isolate as Emulsifier of Nanoemulsified Beverages: Rheological and Physical Evaluation.

The production of biologically active molecules or the addition of new bioactive ingredients in foods, thereby producing functional foods, has been improved with nanoemulsion technology. In this sense, the aim of this work was to develop nanoemulsified beverages as potential candidates for the encapsulation of bioactive compounds, whose integrity and release across the intestinal tract are controlled by the structure and stability of the interfaces. To achieve this, firstly, a by-product rich-in protein has been evaluated as a potential candidate to act as an emulsifier (chemical content, amino acid composition, solubility, ζ-potential and surface tension were evaluated).

Biopolymer-Based Films Reinforced with Green Synthesized Zinc Oxide Nanoparticles.

Nowadays, biopolymer-based films are being developed as an alternative to conventional plastic-based films, mainly because they are non-toxic, flexible, inexpensive, and widely available. However, they are restricted in their applications due to several deficiencies in their properties. Accordingly, the reinforcement of these materials with nanoparticles/nanofillers could overcome some of their shortcomings, especially those processed by green methods.

Biopolymer-Based Films Reinforced with FeO-Nanoparticles.

Nowadays, natural polymer-based films are considered potentially environmentally friendly alternatives to conventional plastic films, due to many advantageous properties, including their easy processability, high flexibility, non-toxicity, low cost, high availability, and environmental safety. However, they are limited in their application by a number of shortcomings, including their high water solubility and vapor permeability as well as their poor opacity and low mechanical resistance. Thus, nanoparticles, such as green FeO-NPs, can be used to overcome the drawbacks associated with these materials.

Novel Trends in Hydrogel Development for Biomedical Applications: A Review.

Nowadays, there are still numerous challenges for well-known biomedical applications, such as tissue engineering (TE), wound healing and controlled drug delivery, which must be faced and solved. Hydrogels have been proposed as excellent candidates for these applications, as they have promising properties for the mentioned applications, including biocompatibility, biodegradability, great absorption capacity and tunable mechanical properties. However, depending on the material or the manufacturing method, the resulting hydrogel may not be up to the specific task for which it is designed, thus there are different approaches proposed to enhance hydrogel performance for the requirements of the application in question.

Green Synthesis of FeO Nanoparticles with Potential Antioxidant Properties.

Iron oxide nanoparticles (FeO-NPs) are currently being applied in numerous high-tech sectors, such as in chemical sectors for catalysis and in the medical sector for drug delivery systems and antimicrobial purposes, due to their specific, unique and magnetic properties. Nevertheless, their synthesis is under continuous investigation, as physicochemical methods are considered expensive and require toxic solvents. Thus, green nanotechnology has shown considerable promise in the eco-biogenesis of nanoparticles.

Gelatin-Based Biofilms with FeO-NPs Incorporated for Antioxidant and Antimicrobial Applications.

Currently, gelatin-based films are regarded as promising alternatives to non-environmentally friendly plastic films for food packaging. Nevertheless, although they have great biodegradability, their weak mechanical properties and high solubility limit their applications. In this way, the use of nanoparticles, such as FeO-NPs, could improve the properties of gelatin-based biofilms.

Effect of Solution Properties in the Development of Cellulose Derivative Nanostructures Processed via Electrospinning.

In the last few years, electrospinning has proved to be one of the best methods for obtaining membranes of a micro and nanometric fiber size. This method mainly consists in the spinning of a polymeric or biopolymeric solution in solvents, promoted by the difference in the electric field between the needle and collector, which is finally deposited as a conjunction of randomly oriented fibers. The present work focuses on using cellulose derivatives (namely cellulose acetate and ethylcellulose), based on the revaluation of these byproducts and waste products of biorefinery, to produce nanostructured nanofiber through electrospinning with the objective of establishing a relation between the initial solutions and the nanostructures obtained.

Biocompatible and Thermoresistant Hydrogels Based on Collagen and Chitosan.

Hydrogels are considered good biomaterials for soft tissue regeneration. In this sense, collagen is the most used raw material to develop hydrogels, due to its high biocompatibility. However, its low mechanical resistance, thermal stability and pH instability have generated the need to look for alternatives to its use.

Applied Rheology as Tool for the Assessment of Chitosan Hydrogels for Regenerative Medicine.

The regeneration of soft tissues that connect, support or surround other tissues is of great interest. In this sense, hydrogels have great potential as scaffolds for their regeneration. Among the different raw materials, chitosan stands out for being highly biocompatible, which, together with its biodegradability and structure, makes it a great alternative for the manufacture of hydrogels.

Incorporation of Elastin to Improve Polycaprolactone-Based Scaffolds for Skeletal Muscle via Electrospinning.

Skeletal muscle regeneration is increasingly necessary, which is reflected in the increasing number of studies that are focused on improving the scaffolds used for such regeneration, as well as the incubation protocol. The main objective of this work was to improve the characteristics of polycaprolactone (PCL) scaffolds by incorporating elastin to achieve better cell proliferation and biocompatibility. In addition, two cell incubation protocols (with and without dynamic mechanical stimulation) were evaluated to improve the activity and functionality yields of the regenerated cells.

Rheological and Microstructural Evaluation of Collagen-Based Scaffolds Crosslinked with Fructose.

In recent years, tissue engineering research has led to the development of this field by designing scaffolds with better properties that can fulfill its purpose of better and faster tissue regeneration, consequently improving people's quality of life. Scaffolds are matrices, predominantly composed of polymeric materials, whose main function is to offer support for cell adhesion and subsequent growth, leading to the regeneration of the damaged tissue. The widely used biopolymer in tissue engineering is collagen, which is the most abundant protein in animals.

Incorporation of ZnO Nanoparticles into Soy Protein-Based Bioplastics to Improve Their Functional Properties.

The union of nanoscience (nanofertilization) with controlled release bioplastic systems could be a key factor for the improvement of fertilization in horticulture, avoiding excessive contamination and reducing the price of the products found in the current market. In this context, the objective of this work was to incorporate ZnO nanoparticles in soy protein-based bioplastic processed using injection moulding. Thus, the concentration of ZnO nanoparticles (0 wt%, 1.

Evaluation of smart gelatin matrices for the development of scaffolds via 3D bioprinting.

Throughout history, different techniques have been used for the development of scaffolds for Tissue Engineering. Among them, three-dimensional (3D) printing for this application has been recently enhanced due to its ease in defining the structure of the material. In this sense, a novel potential alternative could be the development of a three-part device whose leading utility is to improve the introduction of the scaffold in a bioreactor.

Polymer-Based Scaffolds for Soft-Tissue Engineering.

Biomaterials have been used since ancient times. However, it was not until the late 1960s when their development prospered, increasing the research on them. In recent years, the study of biomaterials has focused mainly on tissue regeneration, requiring a biomaterial that can support cells during their growth and fulfill the function of the replaced tissue until its regeneration.

Fabrication and Characterization of Hydrogels Based on Gelatinised Collagen with Potential Application in Tissue Engineering.

Regenerative medicine is increasingly focused on the development of biomaterials that facilitate cell adhesion and proliferation through the use of natural polymers, which have better biocompatibility and biodegradability. In this way, the use of hydrogels has been considered as a potential option for tissue engineering due to their physical and chemical characteristics. However, few studies associate the raw materials properties and processing conditions with the final characteristics of hydrogels, which could condition their use as scaffolds for tissue engineering.