Environmental and economic assessment of urban wastewater reclamation from ultrafiltration membrane-based tertiary treatment: Effect of seasonal dynamic.

This study aimed to assess the environmental and economic performance of an ultrafiltration (UF) tertiary treatment of effluent from an urban wastewater treatment facility. Data from a UF demonstration plant composed of commercially available equipment, including industrial hollow-fiber membranes was used to project a full-scale facility. The results from the demonstration plant recommended different ranges of transmembrane fluxes and sparging air demands under summer and winter conditions to prevent excessive fouling.

Quantitative 3D Characterization of Functionally Relevant Parameters in Heavy-Oxide-Supported 4d Metal Nanocatalysts.

Accurate 3D nanometrology of catalysts with small nanometer-sized particles of light 3d or 4d metals supported on high-atomic-number oxides is crucial for understanding their functionality. However, performing quantitative 3D electron tomography analysis on systems involving metals like Pd, Ru, or Rh supported on heavy oxides (e.g.

A semi-industrial scale AnMBR for municipal wastewater treatment at ambient temperature: performance of the biological process.

A semi-industrial scale AnMBR plant was operated for more than 600 days to evaluate the long-term operation of this technology at ambient temperature (ranging from 10 to 27 C), variable hydraulic retention times (HRT) (from 25 to 41 h) and influent loads (mostly between 15 and 45 kg COD·d). The plant was fed with sulfate-rich high-loaded municipal wastewater from the pre-treatment of a full-scale WWTP. The results showed promising AnMBR performance as the core technology for wastewater treatment, obtaining an average 87.

Improving membrane photobioreactor performance by reducing light path: operating conditions and key performance indicators.

Microalgae cultivation has been receiving increasing interest in wastewater remediation due to their ability to assimilate nutrients present in wastewater streams. In this respect, cultivating microalgae in membrane photobioreactors (MPBRs) allows decoupling the solid retention time (SRT) from the hydraulic retention time (HRT), which enables to increase the nutrient load to the photobioreactors (PBRs) while avoiding the wash out of the microalgae biomass. The reduction of the PBR light path from 25 to 10 cm increased the nitrogen and phosphorus recovery rates, microalgae biomass productivity and photosynthetic efficiency by 150, 103, 194 and 67%, respectively.

Preliminary data set to assess the performance of an outdoor membrane photobioreactor.

This data in brief (DIB) article is related to a Research article entitled 'Optimising an outdoor membrane photobioreactor for tertiary sewage treatment' [1]. Data related to the effect of substrate turbidity, the ammonium concentration at which the culture reaches nitrogen-deplete conditions and the microalgae growth rate under outdoor conditions is provided. Microalgae growth rates under different substrate turbidity were obtained to assess the reduction of the culture's light availability.

Optimising an outdoor membrane photobioreactor for tertiary sewage treatment.

The operation of an outdoor membrane photobioreactor plant which treated the effluent of an anaerobic membrane bioreactor was optimised. Biomass retention times of 4.5, 6, and 9 days were tested.

Resource recovery from sulphate-rich sewage through an innovative anaerobic-based water resource recovery facility (WRRF).

This research work proposes an innovative water resource recovery facility (WRRF) for the recovery of energy, nutrients and reclaimed water from sewage, which represents a promising approach towards enhanced circular economy scenarios. To this aim, anaerobic technology, microalgae cultivation, and membrane technology were combined in a dedicated platform. The proposed platform produces a high-quality solid- and coliform-free effluent that can be directly discharged to receiving water bodies identified as sensitive areas.

Functional roles of a predicted branched chain aminotransferase encoded by the LkBAT1 gene of the yeast Lachancea kluyveri.

Branched chain amino acid aminotransferases (BCATs) catalyze the last step of the biosynthesis and the first step of the catabolism of branched chain amino acids. In Saccharomyces cerevisiae, BCATs are encoded by the ScBAT1 and ScBAT2 paralogous genes. Analysis of Lachancea kluyveri genome sequence, allowed the identification of the LkBAT1 locus, which could presumably encode a BCAT.