Stress Relaxation and Grain Growth Behaviors of (111)-Preferred Nanotwinned Copper during Annealing.

Highly (111)-oriented nanotwinned Cu (nt-Cu) films were fabricated on silicon wafers for thermal-stress characterization. We tailored the microstructural features (grain scale and orientation) of the films by tuning the electroplating parameters. The films were heat-treated and the relaxation behaviors of thermal stresses in the films were explored using a bending beam system.

Pentafluoropyridine functionalized novel heteroatom-doped with hierarchical porous 3D cross-linked graphene for supercapacitor applications.

The fabrication with high energy density and superior electrical/electrochemical properties of hierarchical porous 3D cross-linked graphene-based supercapacitors is one of the most urgent challenges for developing high-power energy supplies. We facilely synthesized a simple, eco-friendly, cost-effective heteroatoms (nitrogen, phosphorus, and fluorine) co-doped graphene oxide (NPFG) reduced by hydrothermal functionalization and freeze-drying approach with high specific surface areas and hierarchical pore structures. The effect of different heteroatoms doping on the energy storage performance of the synthesized reduced graphene oxide is investigated extensively.

Effects of Methyl Terminal and Carbon Bridging Groups Ratio on Critical Properties of Porous Organosilicate-Glass Films.

Organosilicate glass-based porous low dielectic constant films with different ratios of terminal methyl to bridging organic (methylene, ethylene and 1,4-phenylene) groups are spin-on deposited by using a mixture of alkylenesiloxane with organic bridges and methyltrimethoxysilane, followed by soft baking at 120-200 °C and curing at 430 °C. The films' porosity was controlled by using sacrificial template Brij L4. Changes of the films' refractive indices, mechanical properties, -values, porosity and pore structure versus chemical composition of the film's matrix are evaluated and compared with methyl-terminated low- materials.

Synthesis of Free-Standing Flexible rGO/MWCNT Films for Symmetric Supercapacitor Application.

Herein, we report a novel, simple, and cost-effective way to synthesize flexible and conductive rGO and rGO/MWCNT freestanding films. The effects of MWCNT addition on the electrochemical performance of rGO/MWCNT nanocomposite films are investigated in some strong base aqueous electrolytes, such as KOH, LiOH, and NaOH via three-electrode system. The supercapacitor behavior of the films is probed via cyclic voltammetry, galvanostatic charging-discharging, and electrochemical impedance spectroscopy.

Enhanced Photocatalytic Performance of Nitrogen-Doped TiO₂ Nanotube Arrays Using a Simple Annealing Process.

Nitrogen-doped TiO₂ nanotube arrays (N-TNAs) were successfully fabricated by a simple thermal annealing process in ambient N₂ gas at 450 °C for 3 h. TNAs with modified morphologies were prepared by a two-step anodization using an aqueous NH₄F/ethylene glycol solution. The N-doping concentration (0⁻9.

Anisotropic optical transmission of femtosecond laser induced periodic surface nanostructures on indium-tin-oxide films.

Two types of periodic nanostructures, self-organized nanodots and nanolines, were fabricated on the surfaces of indium-tin-oxide (ITO) films using femtosecond laser pulse irradiation. Multiple periodicities (approximately 800 nm and 400 nm) were clearly observed on the ITO films with nanodot and nanoline structures and were identified using two-dimensional Fourier transformation patterns. Both nanostructures show the anisotropic transmission characteristics in the visible range, which are strongly correlated with the geometry and the metallic content of the laser-induced nanostructures.

Superior local conductivity in self-organized nanodots on indium-tin-oxide films induced by femtosecond laser pulses.

Large-area surface ripple structures of indium-tin-oxide films, composed of self-organized nanodots, were induced by femtosecond laser pulses, without scanning. The multi-periodic spacing (~800 nm, ~400 nm and ~200 nm) was observed in the laser-induced ripple of ITO films. The local conductivity of ITO films is significantly higher, by approximately 30 times, than that of the as-deposited ITO films, due to the formation of these nanodots.