Mechanical testing and biomechanical CT analysis to assess vertebral flexion strength of Chinese cadavers.

Biomechanical CT (BCT), i.e., quantitative computed tomography-based finite element analysis (QCT-FEA), promises an improved technique over bone mineral density (BMD) in predicting bone strength and the risk of osteoporotic vertebral fractures.

Chemical Structure and Shape Enhance MR Imaging-Guided X-ray Therapy Following Marginative Delivery.

Ineffective site-specific delivery has seriously impeded the efficacy of nanoparticle-based drugs to a disease site. Here, we report the preparation of three different shapes (sphere, scroll, and oblate) to systematically evaluate the impact of the marginative delivery on the efficacy of magnetic resonance (MR) imaging-guided X-ray irradiation at a low dose of 1 Gy. In addition to the shape effect, the therapeutic efficacy is investigated for the first time to be strongly related to the structure effect that is associated with the chemical activity.

Early predictors of severe COVID-19 among hospitalized patients.

Background: Limited research has been conducted on early laboratory biomarkers to identify patients with severe coronavirus disease (COVID-19). This study fills this gap to ensure appropriate treatment delivery and optimal resource utilization.

Methods: In this retrospective, multicentre, cohort study, 52 and 64 participants with severe and mild cases of COVID-19, respectively, were enrolled during January-March 2020.

Efficient DNA-Driven Nanocavities for Approaching Quasi-Deterministic Strong Coupling to a Few Fluorophores.

Strong coupling between light and matter is the foundation of promising quantum photonic devices such as deterministic single photon sources, single atom lasers, and photonic quantum gates, which consist of an atom and a photonic cavity. Unlike atom-based systems, a strong coupling unit based on an emitter-plasmonic nanocavity system has the potential to bring these devices to the microchip scale at ambient conditions. However, efficiently and precisely positioning a single or a few emitters into a plasmonic nanocavity is challenging.

Hierarchical Nanoparticle Assemblies Formed via One-Step Catalytic Stamp Pattern Transfer.

The one-step catalytic stamp pattern transfer process is described for producing arrays of hierarchical nanoparticle assemblies. The method simply combines in situ nanoparticle synthesis triggered by free residual Si-H groups on PDMS stamps and the lift-off pattern transfer technique. No additional nanoparticle synthesis procedure is required before the pattern transfer process.

Facile Functionalization of Polymer Surfaces in Aqueous and Polar Organic Solvents via 3-Mercaptopropylsilatrane.

Surface modification of a polymer substrate with a mercapto functionality is crucial in many applications such as flexible circuitry and point-of-care biosensors. We present here a novel bifunctional molecular adhesive, 3-mercaptopropylsilatrane (MPS), as an interface between polymer and metal surfaces. Under ambient conditions, surface modification of polymer surfaces with a mercapto functionality can be achieved with low concentration (0.

Steroid Probes Conjugated with Protein-Protected Gold Nanocluster: Specific and Rapid Fluorescence Imaging of Steroid Receptors in Target Cells.

Steroid ligands can easily diffuse through the cell membrane and this property makes it feasible to be used for in-situ staining of the nuclear receptors. However, nonspecific binding of the internalized ligand probe with the cellular components has caused serious interferences for the detection of receptor-expressing cells. We report a novel gold nanocluster (AuNC)-conjugated estrogen probe that can eliminate nonspecific internalization and accelerate nuclear localization to achieve selective and rapid detection of estrogen receptors (ERs) in live cells.

Engineered Nanostructures of Haptens Lead to Unexpected Formation of Membrane Nanotubes Connecting Rat Basophilic Leukemia Cells.

A recent finding reports that co-stimulation of the high-affinity immunoglobulin E (IgE) receptor (FcεRI) and the chemokine receptor 1 (CCR1) triggered formation of membrane nanotubes among bone-marrow-derived mast cells. The co-stimulation was attained using corresponding ligands: IgE binding antigen and macrophage inflammatory protein 1α (MIP1 α), respectively. However, this approach failed to trigger formation of nanotubes among rat basophilic leukemia (RBL) cells due to the lack of CCR1 on the cell surface (Int.

In situ fabrication of cleavable peptide arrays on polydimethylsiloxane and applications for kinase activity assays.

Polydimethylsiloxane (PDMS) is widely used for microfabrication and bioanalysis; however, its surface functionalization is limited due to the lack of active functional groups and incompatibility with many solvents. We presented a novel approach for in situ fabrication of cleavable peptide arrays on polydimethylsiloxane (PDMS) viatert-butyloxycarbonyl (t-Boc)/trifluoroacetic acid (TFA) chemistry using gold nanoparticles (AuNPs) as the anchor and a disulfide/amine terminated hetero-polyethylene glycol as the cleavable linker. The method was fine tuned to use reagents compatible with the PDMS.

Particle Lithography Enables Fabrication of Multicomponent Nanostructures.

Multicomponent nanostructures with individual geometries have attracted much attention because of their potential to carry out multiple functions synergistically. The current work reports a simple method using particle lithography to fabricate multicomponent nanostructures of metals, proteins, and organosiloxane molecules, each with its own geometry. Particle lithography is well-known for its capability to produce arrays of triangular-shaped nanostructures with novel optical properties.

Near-field scanning optical microscopy enables direct observation of Moiré effects at the nanometer scale.

This work reports probing the Moiré effect directly at the nanometer scale via near-field scanning optical microscopy (NSOM). Periodic metal nanostructures of Au and Cu have been produced sequentially using particle lithography, and the overlapped regions serve as Moiré patterns at nanometer scale. The Moiré effect in these regions can be directly visualized from NSOM images, from which periodicity and structural details are accurately determined.

Nanostructures of designed geometry and functionality enable regulation of cellular signaling processes.

Extracellular matrices (ECM) triggered cellular signaling processes often begin with the clustering of the cellular receptors such as integrin and FcεRI. The sizes of these initial protein complexes or clusters are tens to 100 nm in dimension; therefore, engineered nanostructures could provide effective mimics of ECM for investigation and control of the initial and downstream specific signaling processes. This current topic discusses recent advances in nanotechnology in the context of design and production of matching chemical functionality and geometry for control of specific cellular signaling processes.

Engineered nanostructures of antigen provide an effective means for regulating mast cell activation.

Nanostructures containing 2,4-dinitrophenyl (DNP) as antigen were designed and produced to investigate antibody-mediated activation of mast cells. The design consists of nanogrids of DNP termini inlaid in alkanethiol self-assembled monolayers (SAMs). Using scanning probe-based nanografting, nanometer precision was attained for designed geometry, size, and periodicity.

Nanostructures of functionalized gold nanoparticles prepared by particle lithography with organosilanes.

Periodic arrays of organosilane nanostructures were prepared with particle lithography to define sites for selective adsorption of functionalized gold nanoparticles. Essentially, the approach for nanoparticle lithography consists of procedures with two masks. First, latex mesospheres were used as a surface mask for deposition of an organosilane vapor, to produce an array of holes within a covalently bonded, organic thin film.

Automated scanning probe lithography with n-alkanethiol self-assembled monolayers on Au(111): application for teaching undergraduate laboratories.

Controllers for scanning probe instruments can be programmed for automated lithography to generate desired surface arrangements of nanopatterns of organic thin films, such as n-alkanethiol self-assembled monolayers (SAMs). In this report, atomic force microscopy (AFM) methods of lithography known as nanoshaving and nanografting are used to write nanopatterns within organic thin films. Commercial instruments provide software to control the length, direction, speed, and applied force of the scanning motion of the tip.

Automated scanning probe lithography with n-alkanethiol self assembled monolayers on Au(111): Application for teaching undergraduate laboratories.

Controllers for scanning probe instruments can be programmed for automated lithography to generate desired surface arrangements of nanopatterns of organic thin films, such as n-alkanethiol self-assembled monolayers (SAMs). In this report, atomic force microscopy (AFM) methods of lithography known as nanoshaving and nanografting are used to write nanopatterns within organic thin films. Commercial instruments provide software to control the length, direction, speed, and applied force of the scanning motion of the tip.

Nanostructures of octadecyltrisiloxane self-assembled monolayers produced on Au111 using particle lithography.

Preparing high-quality self-assembled monolayers (SAMs) of organosilanes on conductive metal substrates such as gold is problematic because of the hydrophobic nature of the surface under ambient conditions. Trace amounts of water are required for a surface hydrolysis reaction to form siloxane bridges to the metal substrate. We describe an approach using sequential steps of ultraviolet (UV) irradiation, particle lithography, and chemical vapor deposition of octadecyltrichlorosilane (OTS) to successfully prepare silane nanostructures on Au111 surfaces.

Engineering the spatial selectivity of surfaces at the nanoscale using particle lithography combined with vapor deposition of organosilanes.

Particle lithography is a practical approach to generate millions of organosilane nanostructures on various surfaces, without the need for vacuum environments or expensive instrumentation. This report describes a stepwise chemistry route to prepare organosilane nanostructures and then apply the patterns as a spatially selective foundation to attach gold nanoparticles. Sites with thiol terminal groups were sufficiently small to localize the attachment of clusters of 2-5 nanoparticles.

Detecting the magnetic response of iron oxide capped organosilane nanostructures using magnetic sample modulation and atomic force microscopy.

A new imaging strategy using atomic force microscopy (AFM) is demonstrated for mapping magnetic domains at size regimes below 100 nm. The AFM-based imaging mode is referred to as magnetic sample modulation (MSM), since the flux of an AC-generated electromagnetic field is used to induce physical movement of magnetic nanomaterials on surfaces during imaging. The AFM is operated in contact mode using a soft, nonmagnetic tip to detect the physical motion of the sample.

Indirect modulation of nonmagnetic probes for force modulation atomic force microscopy.

Frequency-dependent changes for phase and amplitude images are demonstrated with test platforms of organosilane ring patterns, using force modulation atomic force microscopy (FM-AFM) with an alternate instrument configuration. The imaging setup using indirect magnetic modulation (IMM) is based on indirect oscillation of soft, nonmagnetic cantilevers, with spring constants <1 N m(-1). The tip is driven to vibrate by the motion of a tip holder assembly which contains ferromagnetic materials.

Controlling the surface coverage and arrangement of proteins using particle lithography.

Aims: The applicability of particle lithography with monodisperse mesospheres is tested with various proteins to control the surface coverage and dimensions of protein nanopatterns.

Methods & Materials: The natural self-assembly of monodisperse spheres provides an efficient, high-throughput route to prepare protein nanopatterns. Mesospheres assemble spontaneously into organized crystalline layers when dried on flat substrates, which supply a structural frame or template to direct the placement of proteins.

Self-assembled monolayer initiated electropolymerization: a route to thin-film materials with enhanced photovoltaic performance.

Continuing progress in the field of organic polymer photovoltaic (PV) devices requires the development of new materials with better charge-transport efficiency. To improve this parameter, we have investigated surface-attached bilayer polymer PV thin films prepared starting from a covalently attached monolayer of an electroactive initiator using sequential electropolymerization of dithiophene and its derivatives. These systems were found to show significantly increased photocurrent generation quantum yields as compared to systems made through conventional approaches.

Elucidating the role of surface hydrolysis in preparing organosilane nanostructures via particle lithography.

A new method of particle lithography is described for preparing rings or nanoporous films of organosilanes. Millions of exquisitely uniform and precisely spaced nanostructures with designed surface chemistry can be rapidly produced using vapor deposition through mesoparticle masks. Nanoscopic amounts of water are essential for initiating surface hydrosilation.

Achieving precision and reproducibility for writing patterns of n-alkanethiol self-assembled monolayers with automated nanografting.

Nanografting is a high-precision approach for scanning probe lithography, which provides unique advantages and capabilities for rapidly writing arrays of nanopatterns of thiol self-assembled monolayers (SAMs). Nanografting is accomplished by force- induced displacement of molecules of a matrix SAM, followed immediately by the self-assembly of n-alkanethiol ink molecules from solution. The feedback loop used to control the atomic force microscope tip position and displacement enables exquisite control of forces applied to the surface, ranging from pico to nanonewtons.