The high value utilization characteristics of coal gangue powder with emulsified asphalt mastic through rheological and viscoelastic damage theory.

In order to solve the problems of rutting and early fatigue cracks in emulsified asphalt cold recycled pavement, and the shortage of natural stone resources and new environmental hazards caused by the use of traditional limestone powder filler. In this study, coal gangue powder was added to prepare Emulsified Asphalt Mastic (EAM) to improve the rheological properties and fatigue performance. A series of tests, including frequency scanning, temperature scanning, Multiple Stress Creep Recovery (MSCR), Linear Amplitude Scanning (LAS), and Fourier Transform Infrared spectroscopy (FTIR) were conducted.

EGCG-Modified Bioactive Core-Shell Fibers Modulate Oxidative Stress to Synergistically Promote Vascularized Bone Regeneration.

Oxidative stress induced by reactive oxygen species (ROS) can adversely affect tissue repair, whereas endowing biomaterials with antioxidant activity can improve the in vivo microenvironment, thereby promoting angiogenesis and osteogenesis. Accordingly, this study utilized epigallocatechin-3-gallate (EGCG), a material known for its reducing properties, oxidative self-polymerization capability, and strong binding characteristics, to modify a bioactive core-shell fibrous membrane (10RP-PG). Compared to the 10RP-PG fibrous membrane, the EGCG-modified fibrous membrane (E/10RP-PG) exhibited superior hydrophilicity, excellent cell adhesion, and compatibility.

Nano-laponite encapsulated coaxial fiber scaffold promotes endochondral osteogenesis.

Osteoinductive supplements without side effects stand out from the growth factors and drugs widely used in bone tissue engineering. Lithium magnesium sodium silicate hydrate (laponite) nanoflake is a promising bioactive component for bone regeneration, attributed to its inherent biosafety and effective osteoinductivity. Up to now, the osteogenic potential and mechanisms of laponite-encapsulated fibrous membranes remain largely unexplored.

Theoretical study on lithium storage performance of V-doped TiCO MXene.

With the increasing application of lithium-ion batteries, the demand for high energy density, high-rate performance and high stability lithium-ion batteries is becoming more and more urgent. TiCO MXene, as a two-dimensional material with multilayer atomic structure and multiple active sites, has great advantages in lithium-ion battery electrode materials. However, the original TiCO MXene has been unable to meet the requirements of lithium-ion batteries due to its semiconductor properties.

In situ comparison of osteogenic effects of polymer-based scaffolds with different degradability by integrated scaffold model.

Polymer-based scaffolds with different degradability have been investigated to screen the matrix whose degradation rate is more closely matched with the bone regeneration rate. However, these comparisons are inclined to be compromised by the animal individual differences. In this study, we constructed an integrated scaffold model comprising four parts with different degradability and bioactivity to achieve an in situ comparison of bone regeneration ability of different scaffolds.

A Novel Strategy for Fabrication of Polyamide 66/Nanohydroxyapatite Composite Bone Repair Scaffolds by Low-Temperature Three-Dimensional Printing.

Due to the decomposition temperature of Polyamide 66 (PA66) in the environment is close to its thermoforming temperature, it is difficult to construct porous scaffolds of PA66/nanohydroxyapatite (PA66/HAp) by fused deposition modeling (FDM) three-dimensional (3D) printing. In this study, we demonstrated for the first time a method for 3D printing PA66/HAp composites at room temperature, prepared PA66/HAp printing ink using a mixed solvent of formic acid/dichloromethane (FA/DCM), and constructed a series of composite scaffolds with varying HAp content. This printing system can print composite materials with a high HAp content of 60 wt %, which is close to the mineral content in natural bone.

A sequential macrophage activation strategy for bone regeneration: A micro/nano strontium-releasing composite scaffold loaded with lipopolysaccharide.

Effective tissue repair relies on the orchestration of different macrophage phenotypes, both the M2 phenotype (promotes tissue repair) and M1 phenotype (pro-inflammatory) deserve attention. In this study, we propose a sequential immune activation strategy to mediate bone regeneration, by loading lipopolysaccharide (LPS) onto the surface of a strontium (Sr) ions -contained composite scaffold, which was fabricated by combining Sr-doped micro/nano-hydroxyapatite (HA) and dual degradable matrices of polycaprolactone (PCL) and poly (lactic--glycolic acid) (PLGA). Our strategy involves the sequential release of LPS to promote macrophage homing and induce the expression of the pro-inflammatory M1 phenotype, followed by the release of Sr ions to suppress inflammation.

Thermal Induced Conversion of CoFe Prussian Blue Analogs Nanocubes Wrapped by Doped Carbon Network Exhibiting Fast and Stable Potassium Ion Storage as Anode.

Prussian blue analogs (PBAs) show great promise as anode materials for potassium-ion batteries (PIBs) due to their high specific capacity. However, PBAs still suffer from the drawbacks of low electronic conductivity and poor structural stability, leading to inadequate rate and cyclic performance. To address these limitations, CoFe PBA nanocubes wrapped with N/S doped carbon network (CoFe PBA@NSC) as anode for PIBs is designed by using thermal-induced in situ conversion strategy.

Sequential Dual-Biofactor Release from the Scaffold of Mesoporous HA Microspheres and PLGA Matrix for Boosting Endogenous Bone Regeneration.

The combined design of scaffold structure and multi-biological factors is a prominent strategy to promote bone regeneration. Herein, a composite scaffold of mesoporous hydroxyapatite (HA) microspheres loaded with the bone morphogenetic protein-2 (BMP-2) and a poly(DL-lactic-co-glycolic acid) (PLGA) matrix is constructed by 3D printing. Furthermore, the chemokine stromal cell-derived factor-1α (SDF-1α) is adsorbed on a scaffold surface to achieve the sequential release of the dual-biofactors.

Application of artificial intelligence to the public health education.

With the global outbreak of coronavirus disease 2019 (COVID-19), public health has received unprecedented attention. The cultivation of emergency and compound professionals is the general trend through public health education. However, current public health education is limited to traditional teaching models that struggle to balance theory and practice.

3D-printed hydroxyapatite microspheres reinforced PLGA scaffolds for bone regeneration.

Bone tissue engineering scaffolds with similar composition, structure, and mechanical properties to natural bone are conducive to bone regeneration. The objective of this study was to prepare hydroxyapatite/poly (lactic-co-glycolic acid) (HA/PLGA) three-dimensional porous scaffolds with HA content close to natural bone and strong mechanical strength to promote osteogenesis. To achieve this, we modified HA microspheres with polyvinyl alcohol to create an inorganic filler to endow the HA/PLGA printing ink with higher HA content and excellent printing fluidity for 3D printing.

Evaluation of Transbronchial Lung Cryobiopsy Freezing Time, Biopsy Size, Histological Quality, and Incidence of Complication: A Prospective Clinical Trial.

Background: Transbronchial cryobiopsy (TBCB), a novel way of obtaining a specimen of lung tissue using a flexible cryoprobe, can obtain large lung biopsies without crush artifacts. The freezing time of TBCB was empirically selected from 3 to 7 s in the previous studies. However, no consensus has yet been reached regarding the optimal freezing time used in TBCB.

The shrinking behavior, mechanism and anti-shrinkage resolution of an electrospun PLGA membrane.

The deformation shrinkage of a poly(lactide-co-glycolide) (PLGA) fibrous material seriously affects its biomedical application. To demonstrate the underlying shrinking mechanism and to find a method to prevent the shrinkage of an electrospun PLGA membrane, we investigated the shrinking behavior of PLGA electrospun membranes under various test conditions and discussed the underlying shrinking mechanism. The results indicated that the shrinkage of the electrospun PLGA membrane was mainly regulated by the glass transition of its polymer fiber; the temperature and liquid environment were found to be the two main factors leading to the shrinkage of the electrospun PLGA membrane through affecting its glass transition.

A hierarchical scaffold with a highly pore-interconnective 3D printed PLGA/n-HA framework and an extracellular matrix like gelatin network filler for bone regeneration.

The ideal scaffold for bone repair should have a hierarchical pore structure and gradient degradation performance to satisfy the uniform adhesion and proliferation of cells in the scaffold at the early stage of implantation, as well as providing space for the subsequent regeneration of bone tissue. To this end, we developed a hierarchical polylactic acid glycolic acid copolymer (PLGA)/nano-hydroxyapatite (n-HA)/gelatin (Gel) (PHG) scaffold with a printed PLGA/n-HA (PH) framework and a Gel network filler for bone regeneration by the combination of 3D printing and freeze-drying technologies. The fabricated PHG scaffold features large front hole size (>1100 μm × 1100 μm) and side hole size (>500 μm) to provide sufficient open space and reliable integrated support for cell and tissue ingrowth.

Clinical characteristics and potential factors for recurrence of positive SARS-CoV-2 RNA in convalescent patients: a retrospective cohort study.

Background: The recurrence of positive SARS-CoV-2 RT-PCR is frequently found in discharged COVID-19 patients but its clinical significance remains unclear. The potential cause, clinical characteristics and infectiousness of the recurrent positive RT-PCR patients need to be answered.

Methods: A single-centered, retrospective study of 51 discharged COVID-19 patients was carried out at a designated hospital for COVID-19.

Key Factors Influencing Low-Carbon Behaviors of Staff in Star-Rated Hotels-An Empirical Study of Eastern China.

To guide sustainable development in the hospitality industry requires hotel staff engagement, so what causes and how to facilitate the implementation of low-carbon behaviors should be high priorities. However, most prior studies focused on hotel guest behavior or discussed, on an individual level, the psychological aspects of the factors of the low-carbon behavior of either managers or employees. Therefore, this research aims to examine the effect of influencing factors inside and outside of the hotel context on hotel staff's low-carbon behaviors in star-rated hotels.

The ultralong-term comparison of osteogenic behavior of three scaffolds with different matrices and degradability between one and two years.

Attributed to their structure and composition manipulated to mimic natural bone tissue, porous scaffolds composed of inorganic nano-hydroxyapatite (n-HA) and organic polymers with different degrees of degradability have been proven to be a promising bone regeneration strategy. However, long-term and in-depth comparative research on the effects of scaffolds with different matrices and degrees of degradability on bone reconstruction is still lacking. In this study, the ultralong-term osteogenic performance of three polymeric composite scaffolds based on non-degradable polyamide 66 (PA66), slowly degradable polycaprolactone (PCL) and fast degradable poly (lactic-co-glycolic acid) (PLGA) were investigated comparatively after implanting the scaffolds into rabbit femoral defects for 12, 15, 18 and 21 months.

Heparin conjugated PCL/Gel - PCL/Gel/n-HA bilayer fibrous membrane for potential regeneration of soft and hard tissues.

A novel bilayer fibrous membrane for guided tissue regeneration (GTR) was prepared two-step electrospinning process, subsequent crosslinking and surface conjugation with heparin. The bilayer membrane consists of upper layer polycaprolactone/gelatin (PCL/Gel) membrane for soft tissue regeneration and lower layer PCL/Gel/nano-hydroxyapatite (PCL/Gel/n-HA) membrane for hard tissue regeneration. The results indicated that the physicochemical and biological properties of the membrane were strongly influenced by the crosslinking time and by the heparin conjugation.

The CRISPR-Associated Cas1 Involves Persistence and Tolerance to Anti-Tubercular Drugs.

Tuberculosis remains one of the leading causes of death worldwide. Even if new antitubercular drugs are currently being developed, the rapid emergence and spread of drug-resistant strain remain a severe challenge. The CRISPR associated proteins 1 (Cas1), a most conserved endonuclease which is responsible for spacer integration into CRISPR arrays, was found deleted in many specific drug-resistant strains.